MASTERPLUS RGB Lighting Control and HALO MF120 Fans - Cooler Master RGB

[@terrytaylor6740]

This is the ONLY video I've found that explains the MasterPlus user interface. Thank you!

[@MiBUNNY168]

9:15 CUSTOM Thank you for the perfect video that helped me. Not having it would have been terrible for me because no one would have been able to help me. Without this video I would have been so upset that I couldn't find the settings and would have to find a new CPU fan. i love you ❤ thank you

[@Madalf71]

Thank you! I've been doing my head in with the controllers and set up.

[@dre_707]

I think I figured it out 😅

[@MiBUNNY168]

@@dre_707 me too i love u Thank you!

[@cooladi002]

can the lights on the center ring be switched off ? so only the outer ring glows... ??

[@calebcontreras6853]

👀

[@SouravSivadasan]

Assign black colour for it

[@rexincognito6090]

Hello! How do we customise the halo lighting different color than the fan blades? Like I want yellow halo right with purple blade lights, is this possible in these fans? How to do that?

[@Baraskar_Tabish]

I have a question. Can we only keep the ring/halo lights and turn off the centre lights?

[@malpasocz]

Can be light switched on only for “ring” and the center of fan switched off?

[@henryhernandez2262]

What could cause one of my fans to not RGB all the way? It like studders and doesn't follow the pattern i want it to. The rest of them are fine. I checked to see if any wires were loose and that's not the case.. much thanks for any help

[@ShadowKhan2923]

Upon initial start up, my 3 halo fans spin but don't have lights. I have a 4th cooler master fan daisy chained to them, but it spins and lights up. Possible why?

[@Kxll0a]

it says no compatible devices on the app even though i have cooler master fans

[@peterkarlsson7796]

Nice video. Im tryed the program but my mf120 halo isnt recogniced. What can be wrong ?

[@HardwareArtisan]

Hi peterkarlsson7796, i'm assuming you are using the Cooler master RGB hub as shown in the video as that will be a requirement for this software to work with them. Assuming that is the case, if the software is not recognizing your controller. I'd start with the basics, just power off, try another power connection and reseat the USB connection on both sides, try another USB header if you can. Beyond that, i'd reinstall the software. Also, try shutting down any unneeded software that may interfere with it. As a troubleshooting step, i'd remove all other USB devices to see if it picks it up. I hope that helps, good luck and have fun!!! Thanks for watching!!!

[@peterkarlsson7796]

Yes, same hub as in video. Im took a usb cable and put it in an usb 3 socket, outside the computer, and that worked. Usb on motherboard with the delivered cable dosent work, and usb cable in usb 2 socket outside computer dosent work. Im will test more on a new computer next week

[@Baraskar_Tabish]

is it possible to change the halo/ring lights from the inner blade lights? if so please help

[@JLP627]

How do you apply what you made on lighting maker? I can only play it, but can't seem to apply it so when I open my PC it's using the lighting maker theme.

[@unsolved07]

I was looking for something like this. I am gonna build a pc soon (hopefully) and i was looking for fans which are customizable and good too. I do have one question though, will it go well with AIOs? (like deepcool mystique AIO)

[@joshuaschmitt4095]

What if the firmawre of the controller fails to upgrade? Mine keeps failing even tried with two different controllers.

[@TrewStudios21]

Can you help me as my fans don’t spin when they’re are plugged in

[@dre_707]

Where do you have fans connected to?

[@paras_sevda]

I get an ARGGEN2V2 FW 0.13 TO 0.16 update but when i try to update it nothing happens

[@TheSteeller]

Hello! Can I have 2 hub in one pc? Or if I have 6 fan I need to put him in Gen 2?

[@dre_707]

I had out 2 before but I disconnected it an adjust bought a RGB splitter and connected a total of 6 fans. I removed the second since it would start up differently every time and would have to go in and change it through the master plus software.

[@dawsh_mamad]

Better than armory create

[@gsgamer.368]

not open my pc

[@facelessvaper]

TBF that's how I envisaged ARGB to be many a moon ago... How wrong was I...

[@GanJosie]

Masterplus is the most crappy software, even my antivirus detected it as a maleware, but I couldn't do anything because my HAF 700 evo need it to adjust the iris.

[@HardwareArtisan]

Hi GanJosie, I totally get that, I like Masterplus better than alot of the RGB software out there, but it is what it is.....I feel your pain. Good Luck and thanks for watching!!!

[@dre_707]

I love it everything works perfectly and no issues with my antivirus

[@TearfulNight]

@@dre_707 which antivirus are you using ?