KP Mini 150 RS EFI Exhaust

An Alliexpress special! KO Lightning exhaust for the KP Mini 150 RS EFI. Quick how-to for install, sound check with and without the baffle, and a top speed run!
a.aliexpress.com/_mO84hNs
Vendor: HOTMOTO Store
Prices change lower/higher1 every couple weeks

[@mommasboy1990]

I didn't see ya put a crush gasket in there when ya installed the header

[@Deo_on2]

Sounds good may have to order it for mine.....was there no exhaust gasket on it at all? There is usually one on the head.

[@anythinggarage]

I was inspecting that for a bit. Doesn't seem to have one. Nothing came off and nothing stuck on the original muffler. Felt around in the head, feels like solid metal. I thought watha heck and just put it on and all is fine 😅 no leaks.

[@MotoMedicine904]

I noticed you have the bike on a rear stand which makes it upright and your oil sight glass is reading over full. Could just be because it has a lot of forward lean, but maybe check that out

[@anythinggarage]

That's correct. Oil should always be checked sitting on both tires and alligned straight (someone holding it for you or you trying your best on your own). Don't go by it on the kickstand or swingarm stand

[@MisterSal9895]

Hey are you getting any air leaks on your exhaust? I guess sound can leak through where the air is leaking making the exhaust louder with baffle. Do you know if that's a issue or is that normal?

[@anythinggarage]

You can absolutely get an exhaust leak on any system. Make sure your exhaust clamp is on tight. They also give you that wrap that you can use between the muffler and mid-pipe. I never use them, though. The baffle screw can also become loose over time and, in some cases, fall off during a ride! Make sure everything is tightened up. But don't over torque either!

[@MeeesterEninem]

Nice, How many miles on it now?

[@seanz401]

Lol hows there no exhaust leak with no gasket

[@anythinggarage]

@seanz401 there isn't 🤷🏻‍♂️ wasnt even a gasket before I took it off

[@seanz401]

@anythinggarage from another video I've seen there is a gasket it's a combination of metal and rubber I believe a donut gasket. I did see another kp mini 150 exhaust install and there was a gasket in there. And a round area in the engine for the gasket to sit in

[@victorhoye6116]

Your dog is a pain to listen to.

[@anythinggarage]

Tell me about it 😅