KR Wilson Lifter Tool Set for the Y Block Ford Engine

A very rare KR Wilson Lifter Tool Set for the 239, 256, 272, 292, and the 312 Ford Y Block is displayed, discussed and demonstrated for a few minutes. Take a look at this very unique tool that allowed mechanics to remove and install the lifters in the block without removing the engine from the car.

[@38possum]

I built one with my dad when I was 18 years old, 272 bored to a 292. I ported and polished the heads with the assistance of my dad talking me through it, it was gruelling but learned a lot. But anyway after we got it running it would turn so many RPMS so quickly it would blow the distributor bushings out. I eventually sold the old 56 Ford Fairlane lane and I'm 52 now and kicking myself for it.

[@OlysGarage]

That a neat tool! Almost like the game "operation". I bet the rearmost 4 are a real bear!

[@stanleyj.mitchell4851]

Mr Cutworm sent me here. I came. I saw. I stayed.

[@paintnamer6403]

That too is awesome! This would have to be a dreaded job.

[@justaramblin835]

You can also flip it upsidedown on the stand and just put the clips on from underneath. 🙃

[@HotRodReverend]

Lol

[@aroundlinemen]

Nice video & great tool 🇺🇸

[@misterhipster9509]

The main reason it's called a 'Why Block'.

[@Cougracer67]

The one time I had to replace the cam and lifters in a Y block in the car I made a tool out of a piece of wire. I put two 90 deg. bends in one end and soldered on two more pieces of bent wire so that I had a three fingered tool to snake the lifters up past the crank and rods. Of course I had the pan off but I think my farm boy method worked better than this K. R. Wilson gadget!

[@HotRodReverend]

Would love to see pictures of it! Make a video for your channel?

[@chrisjarvis4449]

now do it with the crank and piston in it and were are your close pins

[@HotRodReverend]

I did a complete swap while a Y Block was in the car… it can be done. Check my playlist for the video