KREG table clone for way less money

Building a huge 64x64 roll around table for the 2 car garage shop. Kreg table want to be for way less money
Follow us on facebook
photo/?fbid=...
Follow us on instagram
/ youtube_built_for_life

[@HerschelHorton]

I like the content and build process. Do us a favor and turn the background music down and change it up. The repeating gets annoying after 14 minutes of watching. I personally don't think KZbinrs need background music on video's like this, but that's my humble opinion. And after seeing the end of the video, it seems like table is to tall.

[@builtforlife]

Thank you for this. You may know if you looked at my channel i am new to this and honest feedback is very valuable i will be mindful of the over musicacation in the future. As far as the height of the table is concerned i agree … if this was for normal table purposes. What is in those 2 boxes is a CNC machine that i won’t be actually working on but putting material on it and sending it to work. Also as i talked about the height was due to the need of maximizing space in my small garage. Thank you for watching and the feedback.

[@HerschelHorton]

@@builtforlife I was thinking that the table is awesome (with a little lowering). Maybe figure a way to allow the legs to fold and you can put it on the wall when you're not working. But that would be a big challenge. Keep up the good work and as a new KZbinr you're doing great!

[@w.thomasphelps2175]

amen brother! That music is mighty annoying.

[@B.A.Bassangler]

Love the nesting concept, gonna save this one! Also, maybe save you some trouble...you can run a hose from a DeWalt planer (blower assist) into a trash can with hole in lid, or even a pillow case with duct tape for that matter when running outside, no worry about fine dust.

[@builtforlife]

I actually have a full dust collection set up now I’ll leave a link bellow. kzbin.info/www/bejne/hpPWfHhmprmsiaM

[@lildusty259]

I haven't even watched the video yet and you get a like for the intro. Well done.

[@builtforlife]

Thanks!!! I’m just starting out so the feed back is awesome… watch the whole video maybe I’ll earn a subscribe 👍

[@jackparanoia]

It starts with a magic trick! Heck yeah

[@MikeM1729]

What helped me when doing glue ups is not over tightening the clamps. When you put the pipe clamps on and saw that massive bow, you just needed to release some of the cranking power on the clamp. Pipe clamps in my opinion are the best clamp because they are so strong and way more affordable than lab parallel clamps. You only need to tighten it until you see an even bead of glue squeeze out. Over tightening can potentially cause uneven glue ups or could even damage the clamp. With all that being said, it’s a great build. Just found your channel by the algorithm and of the video I have watched, I like the content you create. Keep up good work man!

[@builtforlife]

Thank you i really appreciate the feed back I’m new to this and still have a lot to learn.

[@MikeM1729]

@@builtforlife I’ve been doing it for almost a year and there’s so much to learn! Just gotta learn by building stuff.

[@AcrylicMemories]

wow it came out beautiful Subbed

[@builtforlife]

Thank you! I’m glad to have you here.

[@morgan79347]

Tip put a concrete block on you saw horse or something with a bit of weight .

[@builtforlife]

That’s a good tip… i gotta whole new saw horse and it’s awesome thinking about doing a short to show it off.

[@user-vn6hi2bi3g]

Good job.

[@glennirwin4710]

Good idea.

[@scottgrossman9080]

8ft black pipe !!!! Next time lol great vid keep em going

[@builtforlife]

Ha ha yeah that caught me by surprise i was so focused on making sure i had extra in all my dimensions to i could cut it down i didn’t think about being too extra. Thanks for watching!

[@drdwm007]

First great idea. If you wanted to make the good edge 90 degrees to the good face you should have planed first then used the straight edge with the flat face as the reference. Also using a sled to flatten the board it must be shimmed and stable on the sled so the rollers don't move or force the board flat. If you have a bowed or cupped board before the planning, you will have a bowed or cupped board after the planning. The board will be smooth but not flat. And last I don't understand why your out feed saw horse is so much lower than the table saw, it looks dangerous. I'm not knockings you final results they are nice.

[@builtforlife]

Yeah i understand some of my methods are not ideal, but i think that’s part of the journey. I learned a lot taking on this build i created problems and found solutions and ultimately ended up with a great table. There is a lot cut out of this video so it’s not 2 hours long. Thank you for watching and for the feedback.

[@kevinb6102]

Dang. Nice

[@wilder6891]

That is a huge table

[@builtforlife]

That’s what she said

[@johnwayne2103]

That table is nice! Whats cheaper that steel or extruded aluminum? Cool that you have welder. For me I would have to use the extruded aluminum. Easy to take apart, sturdy and lightweight.

[@builtforlife]

Well i paid $60 for a shelving unit and got some scrap steel for free… so in this case steel was much cheaper. I want to build something with extruded aluminum i am just cautious about hardware backing out.

[@johnwayne2103]

@@builtforlife Nice use of scrap materials! I've looked at a number of systems and well after this video I decided to look up some companies that sell this sort of stuff. The locking mechanisms are T-Bolts and once the frame has been constructed it's as solid as a rock. I was looking on ebay for the raw material to see if I can get something like a 4x6 type of frame cheaply. Still looking.

[@richardtullius6419]

Easy fix for pipe clamps that I do all the time, just add coupling and six inch nipple would have solved your problem.

[@builtforlife]

Yeah you are right that would have fixed the problem, but the issue was i never dry clamped everything like i should have. If i had dry clamped everything i would have had the opportunity to go get an extension or even just trim the panels down…. You live , you learn.

[@user-gi4rw7uy1w]

I'm not seeing where you say where you bought the table hardware...unless I missed it somehow. Thanks!

[@builtforlife]

The metal i think i talk about in the video of the smaller table. It’s a pallet rack then the casters came from lowes and the bolts and nuts came from Bolts.com (online hardware store). Hope this helps.

[@chrishorne8247]

Nice build!! Planning on building something similar to nest my table saw under. What did you use for the base material? Could you share a link to it? Thanks!!

[@builtforlife]

I have another video showing the smaller table build and talk about it. I purchased some shelving off FB for 60 bucks and got a bent pallet rack out of a scrap bin.

[@rickpouley2857]

U of Georgia??? Love the video..

[@builtforlife]

GO DAWGS!!!!

[@richm.1583]

Did you have any Snipe issues from the planer?

[@builtforlife]

I did, but i anticipated it. The table is 64” and i started with boards that were 72”

[@DualSportGuy]

Where did you get the frame from

[@builtforlife]

I used a pallet rack i got out of a scrap metal yard and cut it up and welded/bolted it all up.

[@LB-W]

Is it not to high to use power tools safely on?

[@builtforlife]

This table was built specifically fora CNC machine. If you watch some other videos of mine you will see how it all works out.

[@gbwildlifeuk8269]

In the effort to create cubic foot youve expanded the square foot! Its nothing more than a giant shelf! Too high to be of practical use

[@builtforlife]

On any normal table i would agree but this table was built specifically to put my 4x4 cnc on. Check out some of my videos with it in action

[@sinsofvorador]

(Notice thisbis a joke) where's the domino jointer. Hahahaha.

[@builtforlife]

Maybe one day

[@TheFalconJetDriver]

The music sucks, it is annoying.

[@TheFalconJetDriver]

You should be forced to listen to same sound trac for 24 hours. I could not finish wafching the video.🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯🤯

[@builtforlife]

Yeah mistakes were made … that is the second video i ever made thanks for the feed back.

[@TheFalconJetDriver]

@@builtforlife thank you for reading and responding to my comment, seriously music is not needed, your videos would be so much better with out the music.