Great video. I experimented with a zip tie solution for mounting tires. It definitely makes it simpler. I have videoed it, but not had the time to post. You are welcome to do the video and post. The replacement tire gets zip tied with 16 large zip ties to pull the tire tight. Then lever it on. I did it with 8 on one of my tires, but 16 works better. Both sides of the tire go on at the same time. It works pretty good. Used large 2’ long zip ties. Saw it on KZbin
@advinjapan6 ай бұрын
Hey thanks for the idea Ron, that’s pretty clever. I’ll check it out and see if that’s doable here.
@jacknimble16 ай бұрын
Good stuff. Aluminum sprockets traditionally wear out faster than steel. But any reduction in unsrung weight is a super bonus. My rear axle threads were ruined when I removed it for the first time when new.
@advinjapan6 ай бұрын
Thanks Jack. Yes, I misspoke here, you are right. Aluminum does wear quicker.
@tomg62844 ай бұрын
Hint, how to lube a chain. First mix the grease of your choice with gasoline. Then soak your chain in the mix. Pull the chain out and let dry. Now grease is every place the gas would flow into. Job done. Old school but works and is way better and cheaper than spray and pray.
@advinjapan4 ай бұрын
Thanks Tom🙏
@blastradiu56 ай бұрын
Wonderful how-to video! Glad the missus is feeling better and I hope the upcoming surgery you mentioned goes well.
@advinjapan6 ай бұрын
Thanks you so much for the kind words.
@moto_vana6 ай бұрын
So funny, I opened up rear wheel to replace the chain and sprocket today! My OEM sprockets lasted me 35,000 miles! I have changed 3 chains in that much time! Good video- will help so many 390 ADV owners. Kudos!
@advinjapan6 ай бұрын
Nice! That’s incredible mileage, I’m guessing you’re mostly on road? Thanks for the shout out 🙏
@moto_vana6 ай бұрын
@@advinjapan Actually about half of that is off-road. Had the bike since 2020, first gen! :)
@advinjapan6 ай бұрын
Wow, that’s great, probably a record in the community🤣
@moto_vana6 ай бұрын
@@advinjapan 🤣 I wish. There are some riders with more dirt miles out here in the states!
@advinjapan6 ай бұрын
@@moto_vana Japan is a ghost town in that department...😭
@guystevens1626 ай бұрын
Another great video. Think when replace mine think 🤔 will keep it 15-45 setup. And use DID too. Thanks again and hope you and wife are better soon. 😊
@advinjapan6 ай бұрын
Thanks Guy, appreciate that🙏
@infoman18816 ай бұрын
thanks, againe from Turkish man :D
@advinjapan6 ай бұрын
Thank you!🙏
@avikrpandit5 ай бұрын
Love from India ❤
@advinjapan5 ай бұрын
Thank you brother!
@swapnajmohite22515 ай бұрын
Great information…does the rear sprocket ktm power part help in better drive quality. Even I am planning to upgrade my chain but wasn’t sure how the rear sprocket power part would be helpful. Also from which dealer you order ktm power parts from?
@advinjapan5 ай бұрын
Thanks a lot! So the PP rear sprocket is available in 45 and 46 teeth I believe. If you go 46t, even then you probably won’t feel much of a difference. I got mine online from a Japanese KTM dealer.
@Interbeing_CDN6 ай бұрын
Wow! I am surprised you got as many miles on your OEM chain, mine was pretty much toast after 4,500 miles (7,250km). I had swapped the 15 tooth front sprocket for a 14 tooth at the 1000 (1600km) mile mark, which I found was great off road, but maybe a little revvy at highway speeds. I also felt that the smaller circumference of the sprocket placed more stress on the chain, having to spin in the tighter diameter, however, it may be just my imagination. I would disagree with you regarding the aluminum rear sprocket, aluminum sprockets are great for track racing or motocross as they are much lighter, but they do wear out very quickly compared to a steel sprocket. For me, the little bit of extra weight is not an issue to gain longevity. I chose to go with a 15-47 combo as a compromise to the 14-45 combo I was running, it seems to drop the revs about 300rpm at speed, but still performs well off road. I did go to the same D.I.D. VX3 chain as I have had very good luck with them in the past. I also installed a chain guide at the same time I replaced the chain to help protect it off road. Just a few tips, I use a couple of 1 foot 2x4's to prop the wheel off the ground, it makes things easier, and I always replace the nuts holding the sprocket in place when changing out the sprocket as it is the nylon insert that acts as a lock washer to keep the nuts tight. Also, although it's not really necessary for a lower HP bike such as the 390, you may want to consider a rivet type chain link, as it is more secure. I also use a caliper to compare the width of the master link to the adjacent links, but it is probably not be an issue with a clip type master link. I don't know about you, but I found the new chain made a huge difference in chain noise, and it actually improved my fuel efficiency by a noticeable amount, although it was probably also affected by going with a little higher gearing with the 15-47 tooth sprocket combo versus the previous 14-45. BTW I love your suggestion to swap out the hub dampers with the Kawasaki ones, much better than the OEM. Thanks for sharing!
@advinjapan6 ай бұрын
Great advice here, thanks a lot for the thoughtful response. This will certainly come useful the next time around. You are right on the aluminum, I must have mixed them up in my mind when I said that 😅. And duly noted on this sprocket nuts. I’ll be sure to pin this👍.
@rockysturesson615310 күн бұрын
What is the top speed with this setup? And at what rpm are you at around 110kmh?
@advinjapan10 күн бұрын
Hardly affects top speed. I’d say probably 100-200 rpm higher in lower gears, even less in higher. I did a video on this too: #19 - KTM 390 Adventure - Front Sprocket Upgrade - Riding Impression kzbin.info/www/bejne/iqOUoZudm9WJsMk
What was the parts number/link for the 14t dampened front sprocket? Please and thank you
@advinjapan5 ай бұрын
Hey Blank, can’t remember off the top of my head, but it’s the Duke 250 14t sprocket. Just ask the dealer for one, should have them in stock👍.
@treyreppe43486 ай бұрын
I assume you aren't on your original rear tire. Everything I've read says the rear should last half the mileage you have.
@advinjapan6 ай бұрын
Hey Trey, that is my original Tkc70, can you believe it? I’ve seen people go even longer. It really depends on the ratio of off-road to road you do.
@treyreppe43486 ай бұрын
@@advinjapan thank you. I do some gravel roads but mostly touring type riding and am currently trying to wear out my rear tire without wasting it. I want to get a TKC70 Rocks tires to do better offroad without a big change.