KTM OFF-ROAD SPOKE WHEELS + TPMS SENSOR INSTALLATION on KTM 1290 Super Adventure S motorcycle

Complete installation video of the KTM SPOKE WHEEL SET (tubeless tyres) for the KTM 1290 Super Adventure S 2021, KTM 1290 Super Adventure S 2022 and KTM 1290 Super Adventure S 2023, for offroad riding.
How to install the KTM Wire Spoked Offroad Wheels ?
How to install or pair a motorcycleTPMS sensor ? (Tyre Pressure Monitoring System)
This video shows a complete installation of the FACTORY WHEEL SET starting from the unboxing of the spoke wheels, fitting the rimbands, installing the gasket rubbers, ensambling the valve (valve core & valve body) installing the TPMS sensor. Also removing the front & rear wheel, changing the brake discs from the original wheels to the spoke wheels & pairing the TPMS sensors with the motorcycle.
KTM PowerParts :
KTM wheel set 607.09.901.044/30 (17 inch rear / 19 inch front wheel)
Front wheel 3.0 x 19" part no. 6030910124430
front rim band 19" part no. 60309173100
front gasket rubber 3" x 19" part no. 60309277100
rear wheel 5.0 x 17" part no. 6031010134430
rear rim band 17" part no. 60310173200
rear gasket rubber 5" x 17" part no. 60310277100
TPMS tyre air pressure sensor part no. 60312133000
For the correct torque values and installation instructions, always check the installation manuals
The torque values I used :
Spoke Wheels :
Valve nut : 12Nm
TPMS sensor bolt M5x12 : 2,4Nm
Brake disc bolts M6 : 14Nm + Loctite 243
Front Wheel :
front wheel axle bolt M25x1,5 : 45Nm
Brake caliper bolts M10x1,5 : 45Nm + Loctite 243
Front axle clamp bolts M8x20 : 15Nm
ABS sensor/Speed sensor bolt M6x16 : 8Nm
Rear Wheel :
Rear wheel axle bolt M25x1,5 : 90Nm
ABS sensor/Speed sensor bolt M6x16 : 8Nm
👍 Thanks for watching !
🔴 Subscribe to my channel for more : / flamesadventures
--------------------------------------------------------------
👀 OTHER VIDEOS :
🎬 KTM Motorcycle Toolkit : • KTM 1290 Super Adventu...
🎬 KTM SAS Side Carriers install : • KTM SIDE CARRIERS INST...
🎬 GPS Powercable install on ACC2 connector : • GPS POWERCABLE INSTALL...
🎬 Touratech Toolbox Install on KTM SAS : • TOURATECH TOOLBOX inst...
🎬 KTM Touring Top Case : • KTM TOURING TOP CASE f...
🎬 HEED Crashbars installation : • Installing HEED CRASH ...
🎬 My KTM Super Adventure with MODS : • KTM 1290 Super Adventu...
--------------------------------------------------------------
🎵 MUSIC :
Max McFerren - What a Baby
Max McFerren - Atrus Groovemacher
Max McFerren - Sroke
--------------------------------------------------------------
Content :
00:00 Front wheel rimband & Gasket
03:08 Rear wheel rimband & Gasket
05:48 Tyre valve & TPMS sensor
06:30 Front tyrevalve & TPMS sensor install
08:35 Rear tyre valve & TPMS senor install
10:38 placing tubeless OFFROAD TYRES
11:03 removing the front wheel
12:06 changing the front brake discs
14:27 installing front spoke wheel & TPMS pairing
16:37 removing rear wheel
17:05 changing the rear brake disc
17:57 installing the rear wheel & TPMS pairing
#ktm1290superadventure #offroad #installation

[@cpuuk]

Great tip with the soapy water- thx. Hmm, I wonder why the spokes don't get the right-angle valves?

[@dirklanger1010]

Very good video. Could it be possible, that the sensor should be installed in different direction? There are some videos on KZbin where they change the rimband after 5 years in which the original sensor is in different direction. From the view of a physican the torque From the rotation will the be on the screw.

[@FlamesAdventureS]

Thanks, I'm glad you like the video ! For me the orientation of the TPMS sensor looks ok, it's pointing backwards when you follow the turning direction of the wheel. According to the little information I could find this should be the correct way. So far they are still tight 🙏🙂Thanks for the reply 👍 & drive safe 👍

[@eriklindhardsenact7596]

One question I have spoked wheels before I install will the wheels need balancing by any chance? What tyre pressure did you set on rear wheel when you installed the front wheel?

[@FlamesAdventureS]

Hello, best is to balance the wheels when you fit the tyres.... as far as I remember I used a tyre pressure, 2.4 & 2.7 or something, not too much lower than with road tyres....

[@valefur72]

Nice tutorial! Thanks! Are the spacers of the front wheels different? I have bought two second hand spoke wheels but the spacers are missing...🤔

[@FlamesAdventureS]

Thanks 🙏, As I remember the spacers are the same, so don't worry 🙂

[@valefur72]

@@FlamesAdventureS thank you! Pfiuhhh

[@lucasmartinez953]

Hello, do the pressure sensors adjust automatically, or do you have to go to the KTM workshop to activate it?

[@FlamesAdventureS]

Hello, they adjust automatically. After you changed one wheel you have to ride for about 5 minutes. Then you get a pop-up on the screen that the sensor is connected and you can do the same for the second wheel.

[@geneshaw1234]

Do you have to do the same process of doing one wheel at time to connect the TPMS sensors when switching bag to the original mag wheels?

[@FlamesAdventureS]

I let you know, when I change them back 👍

[@FlamesAdventureS]

Hello, I had to do the same to switch back to the original wheels, first one wheel, riding for 5 minutes till the tpms connected, and then the other wheel. @geneshaw1234

[@geneshaw1234]

Thanks for getting back to me! I figured this would be the case but good to know for sure. I am probably just going to stay with the stock wheels as I don't do enough serious off roading to justify the added hassle. They do look awesome though!

[@FlamesAdventureS]

👍 Yeah it's an expensive modification but I recently was on a 6 days offroad adventure and I was happy that I made the choise. I had no worries riding bumpy offroad tracks 🙂@@geneshaw1234

[@josere80]

How much do you spend in the entire kit for both wheels combo.

[@FlamesAdventureS]

Wheels, tpms sensors, rimband & gasket rubbers are all in 1 kit. The price was €945. But I waited to buy till black friday to get a 20% discount

[@florianodomenicali3740]

Attenzione ragazzi !! Il Flap nero , quello che deve tenere l'aria per capirci, va montato tassativamente senza nessun attrezzo che non siano le mani !!!!!! Come fanno nel video la possibilità di pizzicare il flap e creare una perdita è altissima !!!! Ve lo dice uno che ne monta tutte le settimane ......

[@imbranjamil4994]

The best spoke wheels std no comen k

[@erayatalag2207]

Can you compare the weight of the mag wheels and spoke wheels.

[@FlamesAdventureS]

When I change them back, I'll measure the weight 👍

[@FlamesAdventureS]

I've changed my wheels and here's the weight without brakedisc and with a tyre. Original wheels : Front 10.3 kg Rear 13.4 kg. Spoke wheels : Front 11.1 kg rear 14.3 kg.

[@foxdive]

Přední paprskove kolo je o 500gramů lehčí než lité

[@KsuperADV]

Hi, the sensors are the same of the original wheels? Is enough to change the valve or all sensor? Thank :)

[@FlamesAdventureS]

Hello, the sensors are the same. The valve and sensor are together so you have to change them both or buy the spoke wheel set with new TPMS sensors and valves completely like I did (so I can change the wheels to road/offroad setup).

[@KsuperADV]

@@FlamesAdventureS If I buy the sensors with the code provided in the description, will I also receive the valves like in the video?

[@FlamesAdventureS]

Yeah the tpms sensor and valve are together

[@KsuperADV]

@@FlamesAdventureS thanks

[@domenicovallonearanci290]

But why loctite on the brake caliper screws... Why… 😓

[@FlamesAdventureS]

Because you can't afford them to come loose 🙂, it's also in the manual to apply loctite 245 on them. Cheers 👍!