I appreciate the information in your video since this will be my next service on my B7100. Well done! And i would have loved to see what the cleaned filter looked like before reinstalling.
@jpbrotherslandscapingtvent91114 ай бұрын
Good job very clean explaining
@gtloose85492 жыл бұрын
Great video. no waste of time 10/10 Thank you.
@keenowl141010 ай бұрын
Excellent video
@sudd26852 жыл бұрын
Great job young man thank you for your videos.
@mBlairy2 жыл бұрын
excellent well described
@manvan8288 Жыл бұрын
Its a real nice video bout you dint show the fuller plug for the rear axel. Can you add that or. Post it please
@Ron-xn4wf2 жыл бұрын
Good video. Where did you get your lift you elevate your tractor ? I would like to get one.
@bucksgarage12 жыл бұрын
www.twinbusch.com/index.php?cPath=4
@jasonredinbo181510 ай бұрын
Video was a great help. Changed my fluids just like you showed. Appreciate it. HOWEVER, now my loader won't lift? Syphon screen got cleaned. Hydraulic pump seems to be working but when I removed the hose from the pump to the control levers to check for flow, it was just sputtering (engine running). Not sure why its not getting fluid? Appreciate any advice. Thanks a bunch
@bucksgarage110 ай бұрын
Make sure you have the right level of hydraulic fluid? Maybe pump cavitation?
@jasonredinbo181510 ай бұрын
@@bucksgarage1 Thanks for responding. Fluid level is correct. Do you know how the pump system gets its fluid? The pump has suction through the in line (really its the return line I think), but the the out line is just sputtering. So I'm wondering of the line that is the actual source of fluid is blocked?? Not sure where that line is. Really appreciate your ideas, thanks again.
@ownrhythm6536 Жыл бұрын
I have a B7100D with a B748B snowcaster. The front lift is no longer lifting, I think due to fluid loss. Mine has an extension on the hydraulic fill port that has a hydraulic hose that goes to the snowcaster lift cylinder. Would this change the capacity of hydraulic fluid for the tractor and make the dipstick reading invalid?
@MikeFixesStuff Жыл бұрын
Nice vid. On my B7200, there are two strainers, the other on the opposite side. Is there only one strainer on the B7100? I also regret not replacing the Aluminum washers on the back axle bolts, as I now have a leak on one side.
@bucksgarage1 Жыл бұрын
Unfortunately I can't go look at the B We sold it last week and got a newer Massey Fergason with powersteering.
@timcook4163 Жыл бұрын
Thank You. I have a 7100 that isn't lifting as well as it used too and the steering is difficult now. I pulled out the hydraulic dipstick and light brown foamy fluid started coming out. Suggestions?
@bucksgarage1 Жыл бұрын
I would start with fresh fluid and filter. I can make a difference
@robertdykes27082 жыл бұрын
I’ve got an old B7100 that doesn’t have a filter and it far as I know only has 1 screen. And I can’t find the 3rd bolt. I removed 2 bolts. On with a screen. The other on had no screen. They were right across from each other.
@freefromtyrants7626 Жыл бұрын
I have a B7100 with no filter for hydro that I can see,not familiar ,would like to onow about screen clean and fill method
@jackburton17572 жыл бұрын
Thinking about getting a b7200, are these good tractors for hauling wood, clearing brush and debri , plowing snow for a yard little over an acre.just wondering about longevity and effectiveness or spend a little more and get a jd 855 or something.
@bucksgarage12 жыл бұрын
For as small as they are they are very capable. Kubota makes reliable equipment
@tomkneeland26382 жыл бұрын
Did you have to get the O-Rings from a Kubota dealer?
@bucksgarage12 жыл бұрын
Thats where i got them. I had ones in an o ring kit that were really close but just not right.
@mgreen6548 Жыл бұрын
Where did you get the loader for your Kubota?
@bucksgarage1 Жыл бұрын
?? It came with it when I bought it used.
@stephentoye630 Жыл бұрын
Hello buck I have the exact same tractor could you give me the codes of the filters u used please. Thanks