Kubota BX 2350 - Steering Issue Solved

[@efthegop8000]

Thanks for the video and information. Mine has been slowly failing for a couple years and is now just about worthless. I was going to remove it and have it rebuilt but now I will go in a different direction. You just saved me hours!!

[@CallMeColtLLC]

Glad it was helpful, thanks for watching. Consider a Super Thanks to help the channel out and make the video easier for others to find!

[@kevinmook932]

I am trying to replace the steering cylinder on my BX 2200. I can only remove one tie rod bolt from the end of the piston. Is there a special tool that holds the piston locked so that you can use a wrench to remove the other tie rod? There is a notch at the end of the piston for some kind of tool.

[@CallMeColtLLC]

No special tool. It just sucks! Use heat... that's what I had to do.

[@netxtown1524]

Replying to a very old post: I couldn't get mine to break either....so i welded the #$@% the shaft to a chunk of angle iron. Was a snap from there. :)

[@save2rave61]

There is flat side of the rod. You hold it with a wrench to keep it from turning.

[@eliteleaf5305]

What if the steering wheel is really hard to turn even when it’s jacked up in the front.the steering wheel moves the wheels but gives a lot of resistance even when jacked up and I can also turn the wheels with my hand slightly without the wheel moving. The tractor is good on hydraulic fluid ,so I know that’s not the issue, maybe it’s the steering box?

[@CallMeColtLLC]

My guess would be something in the steering linkage, yes. If the tractor isn't struggling hydraulicly.

[@eliteleaf5305]

@@CallMeColtLLC it feels like it’s struggling hydraulically, I already checked the linkage. Also, when I press the clutch in while it’s running it goes back to being easy to turn.

[@scottmeeks2121]

Thank you.

[@CallMeColtLLC]

You're welcome!

[@charlesw316]

Ill take your old cylinder

[@CallMeColtLLC]

It has been sold long ago, I'm sorry.