KUBOTA Mini EXCAVATOR ENGINE OIL CHANGE | KUBOTA U35-4

KUBOTA Mini EXCAVATOR ENGINE OIL CHANGE | KUBOTA U35-4 | Oil type, capacity, intervals ect.
Machine Kubota Mini Excavator U35-4.
How to change engine oil on KUBOTA Mini EXCAVATOR U35-4.
Always Refer To Kubota Excavator U35-4 Operator's Manual for any specification.
KUBOTA OIL FILTER: # HH151-32430
ENGINE OIL CAPACITY: 1.4 gal (5.3 L)
OIL CHANGE INTERVALS: every 500 hours, or every 1 year in the case that service hour is less than 500 hours.
OIL TYPE: Engine Oil approved by A P I service classification and proper SAE engine oil according to the ambient temperature:
Above 25C (77F ) SAE 30 or SAE 10W-30, SAE 15W-40
0C to 25C (32F to 77F ) SAE 20 or SAE 10W-30, SAE 15W-40
Below 0C (32F ) SAE 10W or SAE 10W-30, SAE 15W-40
#kubota #oilchange #pistonshack
KUBOTA mini EXCAVATOR AIR FILTER REPLACEMENT | Kubota U35-4 PRIMARY, SECONDARY AIR FILTERS intervals
• KUBOTA mini EXCAVATOR ...
HEAVY EQUIPMENT BAY Playlist:
• HEAVY EQUIPMENT BAY
KUBOTA U35-4 Mini Excavator HORN PROBLEM | Easy DIAG & REPAIR | HORN TROUBLESHOOTING
• KUBOTA U35-4 Mini Exca...
PistonShack's Top Diagnostic Tools:
1. BlueDriver Bluetooth Pro OBDII Scan Tool amzn.to/2X9hnFX
2. LAUNCH X431 V+ 4.0 Bi-Directional Full System Diagnostic Tool amzn.to/3jzJaHc
3. Automotive Digital Oscilloscope Hantek 1008C amzn.to/3jzJaHc
4. INNOVA 3410 Test Light/Circuit Tester amzn.to/3AoFT4i
5. Fuse Socket Connector Kit amzn.to/3yyB9Zj
6. Fuse Socket Connector Kit, 1 Pack amzn.to/3yyB9Zj
7. POWER PROBE III Clamshell amzn.to/3seWPqZ
8. Lisle 56810 Relay Test Jumper KIT amzn.to/3xLXCRx
9. Lisle 69300 Master Relay Test Jump Set amzn.to/3yNeubQ
MY TOOLS & FILMING GEAR I USE and RECOMMEND (affiliated links):
kit.co/pistonshack
GoPro HERO8 Black amzn.to/3jw7f1s
GoPro Rechargeable Battery (HERO8 Black) amzn.to/3fHVuDS
Screen Protector for GoPro Hero 8 Black amzn.to/39bzX35
DISCLAIMER:
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results.
Due to factors beyond the control of PISTONSHACK, it cannot guarantee against unauthorized modifications of this information or improper use of this information. PISTONSHACK assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. PISTONSHACK recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of PISTONSHACK, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not PISTONSHACK.

[@ontheroad1930]

Let me guess what next video is coming up. Probably, air filter or fuel filter replacement.

[@PistonShack]

You will find it out in 3 days! Cheers)

[@PulsarTECH]

Wow, it's almost no different than a car oil change, small filter, small engine. Very good!

[@PistonShack]

Great point!

[@premabhakti4034]

Very useful video/ Thanks

[@PistonShack]

So nice of you

[@jxp2212]

Nice work! Always good to see the variety of machinery being worked on 👍

[@PistonShack]

Thanks 👍brotha!

[@tybrownsr.4466]

Great job!

[@PistonShack]

Thank you! Cheers!

[@engineeringcanada]

Awesome, thanks for the video!

[@PistonShack]

Glad you liked it!

[@stevem6711]

Good thorough job! Thanks

[@PistonShack]

Thanks for watching Steve!

[@janickvilleneuve6516]

Wow, what a great mechanic, just what I needed to know !

[@PistonShack]

Thanks for your kind feedback Jenick! You're so welcome!

[@leogetsall]

were on the oil stick should the oil level be, 1st line across or the higher line on the dip stick, good video

[@PistonShack]

I would keep in between or at the highest mark on dipstick.

[@jeffreyingrassia4648]

Thanks

[@PistonShack]

You're welcome Jeffrey!

[@mikelanglais7493]

I don’t have that plate covering the drain plug on my 2018 u35-4 . There are no threaded holes to even bolt one up to. Did you add that to that machine? Wondering why they would eliminate this cover. Thanks

[@PistonShack]

Hi Mike. Interesting note. I didn't know that, some Kubota Mini excavators don't have the bottom engine cover. Our U35-4 came with engine skid plate strait from the factory. I am surprised yours doesn't have it. I would definitely make one to protect the engine oil pan.

[@johnchamberlin4791]

My 2018 35-4 rollbar model didn't have a skidplate either I was disappointed lol

[@TheWidowmaker430]

My 2022 model doesn't have one I just found out.

[@yvesberard9577]

i change fuel filter at the same time

[@s.hinote2984]

So don’t fill the filter with any oil? It’ll fill up when you crank machine?

[@PistonShack]

Thanks s.hinote29 for your feedback! Cheers!

[@s.hinote2984]

@@PistonShack I’m changing my oil tomorrow on my u35 for the first time so I was curious and what all was involved and your video answered all my questions!

[@PistonShack]

Perfect, just in time! I am glad it helpful.

[@NCISGibbs88]

Never saw a clear answer for you. The proper way to change oil when it comes to pre filling is always up for debate. I can say, with 13 years years of experience, though I don't do many oilchanges any more since I tackle heavier jobs. I NEVER pre filled oil filters. Unless if was on a semi, or heavy equipment, only r3ason I did so then, was because some of those filters can hold a gallon of oil. It takes a while to fill up, so you won't have oil pressure. Small filters, there is no need, it fills in 2 or 3 seconds, and you're good to go.

[@allmres]

Tip, take the speed sensor off before putting the filter in. I just broke mine.

[@PistonShack]

Thanks buddy!