Kubota skid steer AC not blowing air quick fix

[@strikeprotechoftexas7924]

Thanks Joey for this info, I’ve been living as pretty much as a open cab poor man for a few years. Lol. I have a SVL 75 and AC is running like new!!!

[@charlieholder7011]

I finally got around to doing this to my 75-2 yesterday and the hardest part to me was getting the plastic all put back and getting the lower screws started back, but overall an easy job and IMO the absolute best video/tutorial on how to do this, thank you for making this video.

[@curtisbookhardtjr.7481]

Thanks for the great idea with freeze plugs ! I just did mine and it worked great!

[@teerottie]

Great.. I wish u would've show the cleaning part🙋🏾‍♂️🤷🏾‍♂️🤷🏾‍♂️

[@charlieholder7011]

I have an SVL75-2 and this is the best idea that I have seen yet for cleaning the AC coil.

[@hogfan264]

I'm going to see if this will work on my mini ex Kx040-4, thanks for posting this!!

[@DFCIndustries]

A god damn genius. Thank you sir

[@ronaldhay1470]

I drilled 1 on top and 1 on the bottom, I then fitted Boat Drain plugs. I think the Freeze Plugs Joey used is a good idea as well. I think I will also drill Holes in the Plastic Covers as well so you don't have to remove them.

[@Hunterworks]

I wanted to see the washing and how the water came out the bottom hole when it was not on the bottom.

[@martinman1970]

watch and listen again i tell how that happens

[@Hunterworks]

@@martinman1970 see is what I wanted.

[@martinman1970]

It comes out the drain tube not the hole i cut

[@steverowe4292]

What is the purpose of the bottom hole then?

[@martinman1970]

@@steverowe4292 to put the spray nozzle in on the water hose so you can spray up and down to clean the entire surface of the coil

[@tommygiles9899]

Extremely helpful

[@rickeysingley8774]

Thank you for that video.

[@jodynelson6493]

Your badass sir

[@federicobetancourt14]

What size freeze plugs

[@martinman1970]

2 inch