Looking forward to more videos with that SVL75 and the Battle_AX. There's not much info out there regarding low-flow mulchers on the 75 and seeing them in action is awesome.
@themannstead24942 жыл бұрын
Got a couple tings coming up hopefully ill be able to get some footage
@jasongrinnell1986 Жыл бұрын
I agree not enough info on a lower flow skidsteer setup.
@HomeroGarcia232 жыл бұрын
Great video, I plan on purchasing the same battle axe for my 75!
@themannstead2494 Жыл бұрын
Good choice!
@TheOMEGANOX Жыл бұрын
I’m thinking the new 75-3 with that head could be surprisingly productive.
@hhazelhoff1363 Жыл бұрын
I was so busy jamming out to the music that I forgot to watch the video, what happened.
@miketruman2927 Жыл бұрын
Are those machines Hi Flow?
@spmservicesclearingandmulc98212 жыл бұрын
Let’s do it again soon. Nice video.
@themannstead2494 Жыл бұрын
Yeah for sure
@forward_ever_ever2595Ай бұрын
I'm no expert, but that Kabota mulcher was tearing it up with more efficiency than the bobcat
@jayfray3819 күн бұрын
Operator modifications
@SHERRYEVANS-i1c Жыл бұрын
Is your mulcher head a loftness 61 bsl?
@themannstead2494 Жыл бұрын
Yes this one is
@JT-qf4it2 жыл бұрын
Do you have any issues with the hydraulics overheating while running the mulcher?
@themannstead24942 жыл бұрын
So far I haven't seen water temp above the half way mark, summer in GA will be the test though
@abdoolshamin8676 Жыл бұрын
R these equipment for rent and how much.
@joshcoleman4249 Жыл бұрын
I run a fecon and can tell you that it doesn’t look like they’re running it on high flow. Something doesn’t seem right. I can chew up trees like that in a few seconds with a John Deere 333g.. That Fecon head is a serious machine but you need to have high flow.
@themannstead2494 Жыл бұрын
That's a 75 hp machine running the fecon head here so it's definitely not going to compare to your 333g
@joshcoleman4249 Жыл бұрын
@@themannstead2494 I agree with you there. I have seen some guys running a Fecon on a 325g which is a 75hp machine and was pretty impressed with how well they ran. Not sure if there may be a problem with the one in this video. I was impressed with the Kubota and Loftness head. Actually came across this video because I have an opportunity to buy that exact same setup for a good deal and was curious about how it would run.
@benniebarrow348 Жыл бұрын
It’s not the HP it’s the flow ……I run the Fecon bullhog on my Kubota SVL 90-2 and with high flow it will sit down on a tree like that in seconds . Agreed , something is not right with the way that fecon is running.
@johnjones-qg7mf Жыл бұрын
Are you still running the loftness mulcher on the kabota?
@themannstead2494 Жыл бұрын
No have a T770 with s series battle axe now
@coobreeze9Ай бұрын
@@themannstead2494What made you switch from a Kubota to a Bobcat, if you don’t mind me asking ?
@WorkHard321 Жыл бұрын
Do you like the Battle ax over the fecon? Also what series do you have for the battle ax
@themannstead2494 Жыл бұрын
The head in this video is the L series. It's a standard flow head but works great on a 75hp machine in high flow. I have never run a fecon head so I can compare but I felt in here it outperformed the other machine. The big difference is the l series battle axe was specifically designed for this size machine and the fecon was not necessarily designed that way. Both have their strengths.
@themannstead2494 Жыл бұрын
I have the s series on my new Bobcat. Just been so busy haven't made any videos. Just made on recently with The Stoney Ridge Farmer though if you want to check that one out
@hhazelhoff1363 Жыл бұрын
Amy thoughts on the battle ax against a comparable FAE on a 75 hp machine. I’m buying the Kubota 75-3 and want to find the best head for land clearing in south Florida
@billymcmillen202 Жыл бұрын
What was the cutting width of the battle ax and cost?
@themannstead2494 Жыл бұрын
61in about 26k new
@scottseaner8937 Жыл бұрын
What size Loftness is that?
@themannstead2494 Жыл бұрын
61in l series
@JT-qf4it Жыл бұрын
That Fecon head looks to be too much for that Bobcat.
@themannstead2494 Жыл бұрын
His high flow pump went out about 2 weeks later so that was a big part of it