How to access the hidden settings : set display to MPH etc
Пікірлер: 42
@alexfehners40704 жыл бұрын
01= 0= zero start, 1= non-zero start. 02= speed limit, 25 by default; 03= wheel diameter, 8.0 by default; 04= speed measuring magnets inside the motor, 30 by default; 05= first gear power (percent), 60 by default; 06= second gear power (percent), 80 by default; 07= third gear power (percent), 100 by default; 08= cruise control, 0= off, 1=on. 09, 10, 11 are not used. 12= battery voltage. 20= auto shutdown time, 180sec by default (3min); 22= 1= KERS brake enabled, 0= KERS brake disabled. 23= 0= km/h, 1= mph. 24= screen contrast 99 is used for clearing the odometer (see user manual how to do it).
@alyctro81584 жыл бұрын
could you explain 4? also when i turned up the battery voltage by one step, the battery shows as empty even though i set it back.
@azmathchoudhury87024 жыл бұрын
big ratings for this
@mdwadud94714 жыл бұрын
Thanks very helpful the effort for typing all these down had to take screenshot.
@danpaslea19284 жыл бұрын
Alyctro after you set it back you need to press and hold set button 5 -6 seconds otherway your new settings will not be saved.
@killermiller05ps34 жыл бұрын
Thanks so much
@stevewheatstone18564 жыл бұрын
Many thanks, the manual has a table but didn't say how to save the changes! Mph now set. The scooter seems to have a top speed of 30kmh which is plenty fast. However curiosity got me playing with menu 2 to see what is the top speed. Default appears lower at 25 (kmh?) This seems to have no effect? Any ideas?
@araffaelegmw5 жыл бұрын
Great mph activated.
@scaleop45 жыл бұрын
yea i'm not to keen on kph so i had to set it to mph .
@arpykaragullian81873 жыл бұрын
Do you know what the M sign is as mine is showing and scooter wont work. Ive changed controller as it was saying ecu
@Simon-xi8tb4 жыл бұрын
Anyway to do this on a Kugoo kirin s1 ?
@englishfire104 жыл бұрын
is this possible on Kugoo es2??
@franklinkokain2186 Жыл бұрын
When I turn on the display it says I'm braking but I'm not braking, what should I do?
@bige98783 жыл бұрын
So how do you turn off set menu
@bruhbrown41654 жыл бұрын
Cheers ive just done me mph
@wormboy11252 жыл бұрын
min says m on the regular menu and wont start
@rs.5333 жыл бұрын
Why I can’t change the speed ? Please help
@gabipaputzis94711 ай бұрын
u have poor engine motor like 250w or 150w
@gabipaputzis94711 ай бұрын
you need 350w
@scaleop45 жыл бұрын
well the controller just failed on mine. the speed indicator just flashers ( bug numbers ) now. so now i have to get a replacement controller. its cheap to get but still not good. ( hope it is the controller and not something with the display controller) since there are 2 controllers on it ..one is in the display that drives the 2nd controller for the hub.
@vykintasmizgiris32474 жыл бұрын
this happened to me, but we tried to connect battery directly to the motor to see what broke down, or is the controller or, is it something else...and it got short circuit. After that we tried to connect everything back and it worked just fine. that happened to me when i drove about 600km, now I'm at 1737km and had no problems.
@giubaca3 жыл бұрын
Check speed sensors, 2 sensors one for speed one for kers. Literally both levers, speed and brake. Sensors may not be fully inserted.
@scaleop43 жыл бұрын
@@giubaca yea its fixed now it was the controller for the hub motor...its been fine for over 8 months now lol