Kuhn GA 300 GM Bevel Gear Replacement

Replacing the wore out bevel gear on my kuhn gyro rake.

[@josippenezic7106]

I have ga 280 . had a barings problem but still your video helped . Thanks for help !!!

[@AndyFromm]

Thanks for the comment, glad it helped!

[@michellemeyer9565]

Kuhn Machines use a lot of roll pins, usually double. By the time repairs are needed they are rusted and near impossible to drive out. Have a GA 7822 with a broke stub shaft on the rear rotor . Glad to see what the gear box looks like on the inside. Now I am considering welding the arm back to whats left of the stub shaft rather than attempting to replace the broken shaft.

[@codywillette3738]

I really enjoyed this video 👍 great job

[@AndyFromm]

Thanks!

[@ihus9950]

👍🏻

[@brianbarbdraper5877]

I have the same rake with the same issue. You didn't show how you removed or loosened the top casting from the shaft. Any tips? Can it be heated? I got the roll pins out but the casting is not separating from the shaft. I am afraid to use a puller in case I break the casting. Any suggestions?

[@AndyFromm]

I heated(casting) and beat(shaft) mine. I'd recommend some piece that fits ontop that shaft. I mushroomed that shaft and had to grind it flush again.

[@donvoll2580]

Good day good video picture is worth a thousand words. What did that gear cost.. PA farms was looking at one rake, talk to dealer about gear box, lif he had to buy one, they wanted $6900. for it. H laughed & said on video he could buy new rake, die fferent brand for 6400. Thanks for video

[@AndyFromm]

the bevel gear at my local caseih/kuhn dealer was around $260 usd. that's actually more than I paid for this rake but it needed repairs.

[@AndyFromm]

Don Voll I tried looking for a video talking about that but couldn't find it, do you have the link?

[@luraymartin8774]

Do you know where to get parts and what the part number is.

[@AndyFromm]

Sorry, I don't anymore. My kuhn dealer had no problem finding it that time.

[@luraymartin8774]

@@AndyFromm Thanks I will need to contact my dealer. And thanks for the video. I have the exact same problem with mine.

[@AndyFromm]

@@luraymartin8774 no problem. depending how bad it is, may need both gears.

[@luraymartin8774]

@@AndyFromm I had it apart and it is just the big one.