Kwikset 914 - Creating and Deleting User Codes Manually

Please Subscribe. It would be very helpful!
Where to get a deal?
www.amazon.com...
How to Add a code on the Kwikset 914?
1. Make sure door is open
2. Remove back plate
3. Click Program Button
4. Type in code 4-8 digits
5. Click Lock Sign
6. One beep means you did it right three beeps means you need to do it again
How to delete a code?
1. Make sure door is open
2. Remove back plate
3. Click Program Button
4. Press Lock Sign
5. Type in code you want deleted
6. Click Lock Sign
7. Type code you want deleted
8. Click Lock Sign
9. One beep means you did it right three beeps means you need to do it again

[@Jayturbo_ENTJ]

So many useless information everywhere but this was bulls eye. Tks! Everyone watch this for anything.

[@TheSmartHomeHelper]

Thanks for the comment and I try to make it short to the point no fluff. No one needs all the extra info!

[@natalynaranjo8654]

Thanks so much! I struggled for the longest.

[@TheSmartHomeHelper]

Glad I could help!!

[@MJ20402]

I was about to throw the whole lock at the fence but this video 100% saved the day

[@millienuamah]

Thank you! Straight to the point and explained well

[@TheSmartHomeHelper]

Thanks for the comment Milli T!

[@christopherrosa1362]

My buzzes 3 times whenever I hit the program code

[@christopherrosa1362]

Me too

[@TheSmartHomeHelper]

I might try a factory reset on the lock or rehanding

[@musiccollector]

You ROCK! THANK YOU! And, I was barking up the wrong tree with instructions that told me to press 9 six times, among a long list of other actions, and all that mumbo jumbo from another website!

[@TheSmartHomeHelper]

Glad I could help Harry!

[@babygirl2293]

Thankkkkk youuuuuuu😊

[@TheSmartHomeHelper]

Your welcome!!

[@ginaliuu]

So concise and helpful! The fat-fingering example was helpful bc it made me realize I was doing the same thing - thanks!

[@TheSmartHomeHelper]

Glad it was helpful! Thank you for the comment! Yes, I always fat finger lol

[@Mushy_Zixie]

If I don’t have the existing code what to do to change it?

[@TheSmartHomeHelper]

I would try resting the lock kzbin.info/www/bejne/sIiqdXasnLaogqs first then adding in your code. This way you erase all the old codes and can put new ones in.

[@mjlafalaise]

Does this model sync with the app? If so, do you have a video for it?

[@TheSmartHomeHelper]

It does not, this Lock will require a hub because it is on Z-Wave.

[@mjlafalaise]

@@TheSmartHomeHelper thank you so much! New subbie-- really helpful video!

[@TheSmartHomeHelper]

Thank you Mynoucka! That means a lot!!!

[@xChaosFlower]

I tried this multiple times, then i factory reset it and tried again. Nothing worked. Are there any ither suggestions before i return this lock and switch to a different one?

[@TheSmartHomeHelper]

kzbin.info/www/bejne/sIiqdXasnLaogqs

[@JamesTaylor-tx5xc]

I put new batteries in my lock n you can unlock from outside with key pad but can't lock it by keypad

[@TheSmartHomeHelper]

Try unlocking with the door open. If works then there might be something jamming it to close. If that does not work I might try resetting the lock then trying the lock button.

[@Country_Cutie_1]

Thank you this worked wonderfully

[@TheSmartHomeHelper]

Glad it helped

[@tyfaneeburris33]

Still can't delete a code Tried multiple times

[@TheSmartHomeHelper]

I would try this kzbin.info/www/bejne/sIiqdXasnLaogqs

[@billwhitehead6863]

How do you delete all codes on a quick set nine fourteen

[@TheSmartHomeHelper]

kzbin.info/www/bejne/sIiqdXasnLaogqs

[@shavamccoon1415]

What do you do when you forget the pass

[@TheSmartHomeHelper]

Factory reseting is always an option if that what you are referring too

[@adrianaz2006]

Thank you!!!! This helped!!!

[@TheSmartHomeHelper]

Glad it helped! Thanks for comment

[@JoeyPatenaude]

Quick and easy! Have a like and subscribe👏🏼

[@TheSmartHomeHelper]

Thank you so much Joey!!!

[@Pimpnastyy]

Thank you very much for a no frills, easy to watch video!

[@TheSmartHomeHelper]

Glad it was helpful! Thanks man! Don't forget to Subscribe!

[@JonesLimo]

very helpful. Thank you

[@TheSmartHomeHelper]

Glad it was helpful!

[@kll2163]

Best video! You made it easy! Thank you! All other videos were so complicated

[@TheSmartHomeHelper]

Glad it helped! Thank you KI L!

[@BigSh00ts]

Doesn’t work for me. Is there a master code and that’s what it’s not allowing me to delete?

[@TheSmartHomeHelper]

I don't have a video on Master code but you do this kzbin.info/www/bejne/sIiqdXasnLaogqs then add code.

[@BigSh00ts]

@@TheSmartHomeHelperthanks!!! I’ll try when I get home

[@veronicajohnson6615]

Great video

[@TheSmartHomeHelper]

Thank you for the comment!!

[@dianlba]

Thank you!

[@TheSmartHomeHelper]

You're welcome! Thanks for the comment!

[@americacampuzano665]

It didn't work on my end

[@TheSmartHomeHelper]

I might try a reset to see if that helps

[@v1rotate391]

Life saver thank you

[@TheSmartHomeHelper]

Glad I could help!

[@aldobmusic]

Thank you

[@TheSmartHomeHelper]

You're welcome

[@ddrbizitch555]

Very helpful!

[@TheSmartHomeHelper]

Glad it was helpful!

[@ozzyrubio408]

Thank you sooooo much !! So helpful !! :)

[@TheSmartHomeHelper]

You're welcome!

[@kathleendavis3599]

Easy! Thank you!!

[@TheSmartHomeHelper]

Glad I could help

[@hazelsweet7268]

Any videos on the mechanism? Was struggling to open and lock now it won’t do either. Fresh batteries lights up but no movement ☹️😞😭

[@TheSmartHomeHelper]

This is for the Aura which is pretty similar to the 914 kzbin.info/www/bejne/b4nMf5mMn96iotE.

[@joanharder2124]

You are a genius! Thank you so much! You made it so easy I can't tell you how much I appreciate!

[@TheSmartHomeHelper]

You are so welcome! Thank you for the kind comment!

[@stephenreyda9563]

Is this model a smart lock / works with smart phones phones

[@TheSmartHomeHelper]

So the 914 will need a hub because it is either Zigbee or Z-wave

[@ryubiggie]

Perfect explanation! Thank you I look like a hero to my girlfriend because of you.

[@TheSmartHomeHelper]

Awesome to hear!

[@joshp3249]

Thanks!

[@TheSmartHomeHelper]

Welcome!

[@DiegoRamirez-zc7fs]

Fantastic! Clear and understandable. Thank you.

[@TheSmartHomeHelper]

You're very welcome! Thank you for the kind comments!

[@ebonyj30praisingthelord83]

How does one delete ALL codes while not remembering what those codes are?

[@TheSmartHomeHelper]

Here you go: kzbin.info/www/bejne/sIiqdXasnLaogqs

[@manfredl6]

Very helpful. We took the house over and the old owner didn't leave as with the mastercode. Any suggestions?

[@TheSmartHomeHelper]

Yes go ahead and factory reset: kzbin.info/www/bejne/sIiqdXasnLaogqs This will delete all the codes and allow you to create a new one.

[@mayphan2872]

How can I remove the cover please advise tks

[@TheSmartHomeHelper]

So with the 914 I believe you have to squeeze the cover plate to remove. It can be a little difficult so I typically will just take off the backplate completely with the two screws on the side.

[@JF-snackpk]

Can you use more than 4 numbers as a code?

[@TheSmartHomeHelper]

Yes, I think it is 4-8 digits

[@lyzandralebron2531]

I tried re-key and then reset code and it only flashes red! What do I do:/

[@lyzandralebron2531]

It’s also not locking when I press the lock icon after I re-keyed it

[@TheSmartHomeHelper]

Hey go ahead and try rehanding the lock this should get the lock button to work kzbin.info/www/bejne/oYSkZ3WkYsuBedE

[@ludata679]

Thanks, this helps a lot

[@TheSmartHomeHelper]

Glad it helped! Thanks for the comment!

[@theladytech]

Your a life saver. Thanks so much

[@TheSmartHomeHelper]

Happy to help!! Thanks for the comment

[@johngill5175]

But wait, how do we do it with a phone?

[@TheSmartHomeHelper]

Do you have a smart hub? The 914 is Z-wave so you'll need a smart hub and should be able to do it on there. If not, this is the way you'll have to do it.

[@BloodyRSX]

Thanks, helped a lot!

[@TheSmartHomeHelper]

Glad to help!

[@briansamms7606]

My program button doesn't beep.

[@TheSmartHomeHelper]

Hey Brian, I might try doing a Factory Reset to see if that helps or check the batteries. Here is video on how to reset kzbin.info/www/bejne/sIiqdXasnLaogqs

[@paulopilot76]

I had the same issue , so I cant create a code. what u did?

[@NeverTakeSecond]

My program button doesnt beep after a factory reset and i have fresh batteries, plz help ​@TheSmartHomeHelper

[@rosedybel1695]

Thanks so much!

[@TheSmartHomeHelper]

You're welcome! Glad I could help!

[@fencerd02]

How to change master code?

[@TheSmartHomeHelper]

So I don't believe the Kwikset has a master code like the Yale lock does.

[@TheSmartHomeHelper]

Actually, I was able to find this video for the 916 I'd give this a try not sure if it will work but worth a try. kzbin.info/www/bejne/pamVY4apibmZncU

[@fencerd02]

@@TheSmartHomeHelper the 916 process seems to work

[@TheSmartHomeHelper]

Awesome 👍 Sorry for late reply on this!

[@fencerd02]

@@TheSmartHomeHelper thanks for the great content!