Replacing the oil line on a Stihl ms 250

[@paulnandico2370]

Thank you. Saved me from buying an easy fix saw. No shop and looks too risky with many possibilities of something else being wrong.

[@michaelfant5842]

Excellent ! Very well done. Thorough, complete and very helpful. thank you very much.

[@PeterBryan-l1y]

A couple of observations: first, it is a #27 Torx driver, second, on my MS250, it takes a 5MM bolt, not a 6MM bolt to remove the oil pump, and third, it is not necessary to tighten the clutch back on too tight, because it will self-tighten when you have the chain back on and start cutting. Other than those minor points, an informative video.

[@KyleHallwoodworker]

You are correct

[@tarhill4830]

Quick guestion oil galley from pump to bar does your saw have a open hole beside muffler on top side of tank or is it plugged

[@manfredriedelsheimer8927]

sorry - why do farmertec not send the Holzfforma G660 (that looks like the old originally rebuild ms066 from 2003) to germany?

[@dogholooha]

I think you made for these tutorials. Loved it.

[@KyleHallwoodworker]

Thank you

[@josephdalonges8718]

Had your oil pump in 180 degrees off. The saw has a diagram on the bottom showing orientation

[@justinbuckert4356]

You forgot the needle bearing on cluch shaft but good informative video thanks for creating

[@sandraworkman2946]

Very good video things I didn't no but what happen too the needle bearing on clutch drum didn't see you put it in.

[@KyleHallwoodworker]

I think it was still in the clutch drum so just slipped it all on at once

[@guitarman12325]

Nice video. Only thing is I didn’t see you put a bearing on the crankshaft on the clutch side.

[@KyleHallwoodworker]

Might have forgotten to put it on

[@alancrum645]

Could you list Stihl part # used?

[@vijaymanali8208]

❤

[@gunterbecker8528]

Kyle,u should be a teacher ! Good work mate 😊

[@guitarman12325]

Needle bearing for the clutch drum.,

[@tomnielsen9450]

Is your bar hole cloggedccheck that first.

[@timkelley6616]

You need to look at an Echo 4910 or a 501p for your next saw.

[@danainyakurerwa2433]

❤