Need to try it on and test the sound for those who might want to do this too. Like to hear the difference
@aXspaceXpotato9 жыл бұрын
+Heath Julie Ofstead will post update soon
@aXspaceXpotato9 жыл бұрын
+Heath Julie Ofstead link in description
@officejedi74659 жыл бұрын
I was messing around with mine tonight and noticed 2 things. If you press on the back of the mic right at the base where it sticks out a little (as it is installed out of the box), just lightly with your finger, most of the distortion and feedback stopped...seems to stop a minute vibration the mic has as it is super sensitive. Second, I wrapped paper towel around the mic and bottom and taped it. Then it sounded amazing with almost no distortion or feedback. I'm still working on a permanent fix but it seems due to the super sensitivity of the mic you need to 1. remove the dish beneath it and 2. wrap the mic with something to dampen and cancel all the frequencies it is picking up. This is what seems to give me the most accurate sound with little to no feedback. Hope this helps.
@briw89299 жыл бұрын
how about using a foam microphone boom speaker tip. you probably seen them, the type motorcyclists use. would one of them work?
@markukrainetz50589 жыл бұрын
+Bri w (willbo) good idea
@mikehancho25179 жыл бұрын
thanks I did mine and works and fits better. " I will finish what you have started grandfather. "
@namiexamuroxnobody9 жыл бұрын
Just did this to my new helmet and it sounds so much better! Thank you!!
@johnrohrs94828 жыл бұрын
Randy, I see in the background on your desk what looks to be Kylo Ren costume instructions. You mentioned your costume in another video. May I ask where you got your costume from? I am looking at the XCoser Kylo Ren costume but don't like the scarf/cape. The pattern I see on your desk looks pretty movie accurate, without seeing your actual costume. I'd be interested in seeing your costume, or at least knowing where you purchased yours.
@dk0r519 жыл бұрын
The feedback issue may be resolved by reversing the direction the microphone faces --no duck-tape or part removal is necessary. When attempting this, do not try and pull the microphone out of the cavity by pulling on the red and black wires --you'll likely break the weld. Instead, note that there is a thin cylindrical rubber sheath which the microphone is laying within. Pull up on this sheath and the microphone will come with it. Be careful not to damage the wires when reinserting the microphone backwards into the cavity. I ended up filling a small channel into the plastic to allow additional room for the wiring.
@aXspaceXpotato9 жыл бұрын
+Anthony Phillips I took parts out to reverse the direction of the mic because it was securely screwed to the same part as the dish. no wire handling or anything. but if that worked for you that's a good idea.
@dk0r519 жыл бұрын
+Randy.M.Greer if you remove all three screws then you can open the mic housing and reverse the microphone itself, not just the housing as you have done. This will allow the mask to retain its original look rather than having to plaster duck tape and bubblegum throughout.
@aXspaceXpotato9 жыл бұрын
hey guys, ive been pretty busy with seasonal employment. sorry for delay. I will gladly post a preview of the before and after sound soon.
@stereomatch9 жыл бұрын
Kylo Ren Voice Changer KRVC app on Google Play (android) is now available. First attempt at the voice. Click Adjust - Voice Depth - set slider on left to the right depth.
@DisplayNameFilms9 жыл бұрын
Yeah, it's definitely not. No where on in the Google play store.
@stereomatch9 жыл бұрын
The app is under review .. since has no copyrighted audio or images, hopefully will get through.
@stereomatch9 жыл бұрын
Check out our Space Villain Voice Changer (!)
@stereomatch9 жыл бұрын
Our Darth Vader app was recently reviewed at: gadgets.ndtv.com/apps/features/from-yoda-speak-to-darth-vader-voice-changer-the-force-is-strong-with-these-apps-779230 - Happy Holidays!
@stereomatch9 жыл бұрын
New Kylo Ren (Space Villain Voice Changer) version has a slightly improved voice for Kylo Ren - more static/radio touch to it. And better Speak samples (we tried to avoid using the exact dialog).
@briw89299 жыл бұрын
have you thought about replacing the speaker? many battery type speakers or microphones can be found
@aXspaceXpotato9 жыл бұрын
+Bri w (willbo) have not considered that, but will consider that!
@darthminikus72005 жыл бұрын
When did that came out cause I was wondering if they are going to make a new one for the supreme kylo ren helmet
@roberttarin48389 жыл бұрын
Can you do a sound test on how the helmet sounds ?
@ndiaz78299 жыл бұрын
wanted to hear it
@zafranmustaza76427 ай бұрын
Hye just want little help, why after put battery cannot play any sound 😭
@N.E.U.R.O9 жыл бұрын
That lens flare on the visor though at 0:21
@IncurZeAwperator8 жыл бұрын
j.j. abrams did it
@talsweet19029 жыл бұрын
I see your costume sketches in the background, are they posted anywhere?
@aXspaceXpotato9 жыл бұрын
+Tal Sweet They're not posted but the costume is done
@TheFishtal99 жыл бұрын
+Randy.M.Greer Do you have pics or vids of it?
@MrFastjedi3505 жыл бұрын
I just took mine completely apart, cutting it up to make a more screen accurate piece and cut the voice changer out. I have a complete separate voice system.
@therealsnivy54473 жыл бұрын
I'm looking for a new sound system. Do you know where I could buy a better one?
@flushyoudowntheloo9 жыл бұрын
where did you get the plans to your left for the outfit?
@aXspaceXpotato9 жыл бұрын
+flushyoudowntheloo I made them
@flushyoudowntheloo9 жыл бұрын
would you be able to release them?
@robertr64468 жыл бұрын
I want to change the microphone on the Kylo Ren helmet. Does anyone have any recommendations with microphone replacement brand and model? I already changed out the speaker and totally redesigned the interior. Appreciate feedback with the microphone.
@CodySyphon9 жыл бұрын
If they Start To make more Black Series Helmets...may there Be a 501st Clone Trooper Second Phase Helmet
@ultimatevenom45639 жыл бұрын
Why didn't u put it on that way we can hear the difference
@thelognerrator5 жыл бұрын
Hey wanna know how to fix it? Act, dont talk in your normal voice then it will work.
@jammer5dryv9995 жыл бұрын
Didnt work
@darthboti9 жыл бұрын
new year and im watching here we come 2016
@mac278019 жыл бұрын
Overall how big is the inside? I'm really considering this for a cosplay but I have a pretty big head haha
@aXspaceXpotato9 жыл бұрын
+Michael Cortez my heads 33" around. fits fine
@mac278019 жыл бұрын
+Randy.M.Greer perfect! Looking forward to seeing more updates!
@MrAntnee559 жыл бұрын
I just took the dish out and works fine now that all I did
@MB3Productions9 жыл бұрын
You didn't let us hear a before & after. Actually, you didn't let us hear anything at all. This was about the voice changer, something audio. some audio would be nice. :-)
@randygreer19329 жыл бұрын
+MB3Productions link to audio test is in the description ;)
@adrianthomas21329 жыл бұрын
do you have how it sounds before and after the mod?cheers buddy
@aXspaceXpotato9 жыл бұрын
+Adrian Thomas will post soon, thanks
@adrianthomas21329 жыл бұрын
Thanks bro.. Mine still is bad after removing the Lil cup inside
@thedudemakesvideos189 жыл бұрын
is this like from Wal-Mart
@darkseid20219 жыл бұрын
I'm a bit angry after buying one since each review says the mic is very sensitive and loud (mine is very quiet) and it has a very bad paint job (chrome looks more greyish). I'll stick with my $30 Disney one.
@briw89299 жыл бұрын
u sure u got a genuine one? mine is quite shiny and loud
@darkseid20219 жыл бұрын
It is. I ended up buying a second one at a different target and it was also shoddy. I think the quality is hit or miss.
@briw89299 жыл бұрын
+Eric Johnson that's a shame :-(
@olofblomsterberg37729 жыл бұрын
ive heared alot of bad reviews regarding the target one but better regarding the disney one =)
@kabutoyakushi66189 жыл бұрын
all that and we don't get to hear it after? wtf?
@aXspaceXpotato9 жыл бұрын
+Alex Nelson you get to hear it in the most recent video I posted after this one. It's up
@BrotherNatural9 жыл бұрын
No offense, but what's your head size?
@aXspaceXpotato9 жыл бұрын
+BrotherNatural 33" circumfrance. My glasses also fit snugly in it. Details in the video link under description asking with voice test.
@BrotherNatural9 жыл бұрын
+Randy.M.Greer what's your baseball cap size?
@GabrielMcIntyre9 жыл бұрын
But how it sound???
@aXspaceXpotato9 жыл бұрын
+GabrielMcIntyre still not too impressive but a lot better than before imho
@scottbaker45058 жыл бұрын
well you cant wear helmets in movies anymore
@Chunnibyoubaka9 жыл бұрын
And you broke your helmet and made it sound worse, therefore you didn't post an after clip of you talking into it.
@aXspaceXpotato9 жыл бұрын
+Trevor Donalson That would suck, but luckily that's not the case. it still works, I just became more busy at work for the season. will post soon.
@aXspaceXpotato9 жыл бұрын
New Video up
@920009 жыл бұрын
+Randy.M.Greer Can we hear that voice changer after your feedback fix?
@aXspaceXpotato9 жыл бұрын
+Seba92000 i posted a video. It's up already with the voice test in it.
@920009 жыл бұрын
Randy.M.Greer Which one?
@aXspaceXpotato9 жыл бұрын
+Seba92000 link in description. Also my only other video with the words "Kylo Ren" in the title.
@randygreer19329 жыл бұрын
+The Collectors Corner awesome and thank you. I'm gonna try to post my Cosplay of this this weekend.
@JamesBoss-u4h4 ай бұрын
Kylo ren mask good
@CarsonSmith749 жыл бұрын
also....
@CarsonSmith749 жыл бұрын
I have a big head too ha ha awesome video. I just subbed, check out my channel ask
@akatsuki55048 жыл бұрын
Didn't even show us how the voice changer sounds after all that explanation. relatively useless video.