Kymco Agility 50cc boss and rollers derestriction

[@timr617]

I had to watch this on mute so I wouldn't start screaming

[@micheljuriq2790]

:D :D :D

[@BioMess]

this must be how my jonway 50cc is restricted... thx for the vid, Ive been looking for this info.

[@tom1900to2000]

Good god this music is killing me

[@rkl2485]

Dude I was about to comment the same f*cking thing when I saw your comment. Terrible track selection, lol. MUTE.

[@sullie35]

It sucks. Not worth watching his video

[@ClinesMindMetal]

@Nasir Ameer no one does give a shit so stfu.

[@johndk8]

Hey mate great video, are you able to provide links to where you ordered the parts from?

[@rwijgman8781]

easy and well displayed video but tell us how manny gram the rollers and the inpakt it has i have a kymco super 8 only modified cdi(when i bought )it so 50 cc 6.5 gram vario rollers and drive 70 km a 65 when i got wind against me

[@AMAZINGPCGRAPHICS]

Will this destroy your piston quickly? already de-restricted it from 28mph to 40mph with the CDI unit, after some googling seen this upgrade will make it do 48mph.

[@alien_man1669]

I derestricted mine and I sometimes see 45 already. Im waiting on putting this in with the a9 camshaft because my understanding is you need to upgrade the valve springs as I've heard someone blowing theirs to hell when they hit 50. I've already hit 50 momentarily with just the cdi and it didn't sound too good :edit valve springs not piston springs

[@alien_man1669]

@@joshkaylor3250 yes I bought a new one. I initially pulled the wire and then cooked my whole wire assembly dropping the wire to ground and to boot the wire cutting method didn't even work

[@caiwilliams1441]

Do you have the new agility 50

[@caiwilliams1441]

And how do you de restrict it with the cdi I can’t seem to find the small black box and I have the 2018 kymco agility

[@caiwilliams1441]

john papajohn f

[@goncalocunha8717]

Did you change the variation or did you just clean it?

[@wowandre1210]

Wont loctite just seal it so hard it will be hard to open again? And does the agility RS have the same parts? So this tutorial includes agility RS too?

[@TheDragorin]

blue loktite can be overcome easily enough by a bit more force. red loctite is supposed to require heat to remove altho ive broken red loctite by hand several times.

[@MrCurt54661]

Which weight rollers did you go with and top speed?

[@darthjar9117]

So what does replacing these parts do to the scooter?

[@OnurCan-j5f]

Hizli gitmesi icin nekadar ağırlık takmamış lazim ?

[@iratenews1753]

What size rollers do I put in 50cc to make faster up hill its going 15 miles sometimes slower please help it was faster before I swapped the variator. Old variator kept destroying belt

[@jamesconner3437]

what torque power for putting the nut back on at 5:10.....and I'll not mention the music...lol.

[@caiwilliams1441]

Did you do anything with the cdi?

[@banaanqwerty4242]

Have you even watched his channel

[@flowdkalle4650]

U have the link to buy the rollers

[@burakkaraatepe5208]

Kymco Agilitiy 50 CC Variator Rollers Weights How many grams help please

[@vladimirl3065]

Standard rolls are 6.5 grams. For a higher maximum speed 7-7.5 grams are recommended

[@mokebang7526]

Thank you!

[@VisitorE.T.]

how much increase your speed on your scooter ?

[@coykirkpatrick4273]

Is there a link to where you bought the new parts from?

[@RIMHQ-YT]

AliExpress

[@eliaslundstedt5607]

I kinda took this apart for no reason when I found out that it's a lathed edge, and not a loose ring. fuck. also I forgot to put the washer back behind the bolt. Should I put it back?

[@jamesflint460]

Do you have to use an impact gun ?

[@colinshard8665]

not necessarily, it just makes the work easier and quicker but you can also do it by hand, i did it with my old 2-stroke that uses the same drive system, and working without an impact wrench, will mean you have to buy a special tool to immobilize the starter wheel so you can apply the strength to undo it

[@etoshiro1021]

where do you find the 10 screw like the smallest one?

[@flexbrah9880]

Or What is the optimal deristricted roller weight?

[@xid444]

what is it with the restriction boss does he replace it? pulls it out of nowhere?

[@timr617]

mitchel asscheman he pulled it out of his ass

[@jensmartinhedegaardanderse767]

When he removed the variator he also removed the boss

[@jerrybanks9216]

I barley got to 1:07 didn't realize i was on a radio channel shit I was looking for info

[@colinshard8665]

what size and weight are the rollers, i have the exact same bike, even down to the colour are they 15x12,or 16x13? or 18x15?

[@jyriniskanen5724]

Colin Shard 16×13

[@evillain999]

where is the pipe 0:50 connected? i haven't such a pipe attached at this casing.

[@zerocool6452]

It's just an air inlet for the fan in the CVT housing.

[@burakkaraatepe5208]

What do the grounds of drive rounds

[@robwyatt9603]

better loctite it than the variator flying off whilst riding

[@addeade231]

Kymco new like II 50i??? same ???

[@flexbrah9880]

What does the rollers weight?

[@JKV.]

7g

[@slahoudi8614]

كيفية نزع الروداج kymco agility 50c fr

[@roynijmeijer4252]

What size were those new Rollers?

[@JKV.]

7.0g

[@claudiorebeiro3632]

Is the boss 37 mm or 38 mm?

[@daand12]

Claudio Rebeiro 38mm

[@claudiorebeiro3632]

daand12 Thanks

[@joeceppetelli9891]

Hi, what is the size for the tool used to remove the casing at the start of the video? Can anyone help

[@quinthijssen5509]

Joe Ceppetelli 8

[@Meneer.Luiten]

how mutch grams is it

[@robbet7963]

Got the same question

[@SuperBongface]

V/10 A/.007 Hit mute at the beginning of this or .... trust me just hit mute and read through it for a happier life ;)

[@jerrychaps8371]

this is the kind of music scooter people listen to

[@dis_fawkn_guy9836]

no just this guy

[@jindra66]

Hi nice video however never put lock tight on crankshaft!

[@kasperjachimczuk5899]

does this also work on a kymco agillity 50 16+

[@faabberg]

6.3 grams

[@addeade231]

What about Kymco II Like 50i (the new kymco like)????

[@fs-rj2jq]

Why is the impact gun so important? I'm sure it can be done without it

[@banaanqwerty4242]

Bcs if u do it wrong without you will easily break the moped

[@leejones3061]

I'm trying to do it this min with. A socket got no chance

[@Ziclickdu34]

whats the reference of the rollers ?

[@colinshard8665]

checkout this link:www.virijavara.fi/kauppa/data/Variaattorirulla_koot.pdf this gives you the standard fitted size and weight of the rollers for your type of bike, the agility 50cc 4-stroke is fitted standard with 16x13 6,5 gram rollers

[@RellyOhBoy]

Glad my mute button works...

[@michelleblau7287]

What weight of rollers are you suggesting? I have a Kymco 50cc Super 8 50x... I see that the smooth boss is a 38mm... I just need to know what weight of rollers. Thanks

[@elikiley1765]

Michelle Blau it depends what you are trying to achieve m, fast takeoff or faster overall speed. Lighter I better for faster takeoff but for a more reliable and faster speed heavier is better

[@leobirgenheier7986]

Where in the H did you get the horrible background noise. PLEEAASSE eliminate it.

[@cowlumbus]

Wtf is going on with his music...I cannot make it through the video!!!

[@chaunceyhulbert7264]

My God this music is absolutely fuckin awful. I hope the video is informative.

[@marcnissen578]

This is the most annoying music to listen to

[@JazzyLocke]

Good video-----horrible choice of music!

[@JazzyLocke]

@Jose Alexander LOL!

[@madblunted]

They gay night club music….