L.E.D. Indicator Lamp Assembly Replacement on 2011 Softail Deluxe

[@bobbyrichardson7377]

Dude, thanks for all the help.

[@rogeliosaavedra5970]

Not a problem. Glad this was helpful. Rode Safe! 🤙

[@jameszo2915]

Same problem. Thanks for taking the time to share.

[@stephenrutland6648]

Just had to do exactly this on my 2007 Fatboy as the neutral light stopped working. Here in the UK it cost me approximately $180 US. The old circuit board was kinda corroded so, to prevent damp damaging the new one, I Gorrila taped half dozen Silica packs around the inside of the Speedo housing in the vain hope it will stop the new circuit board corroding.

[@rogeliosaavedra5970]

Damn it. Pretty pricey in the UK. Glad you got it taken care of. It’s a great idea on taping the new board with gorilla tape. Ride Safe. 🤙

[@justinblue5346]

Thanks for sharing this. My Fatboy has the same problem recently. I downloaded the service manual and it said to remove the tank before you did anything. You made my day showing that it can be done with out doing that. Thanks again.

[@rogeliosaavedra5970]

I'm glad the video was able to help you. It's odd that the manual instructed you to remove the tank. Ride Safe.

[@edwintutty2439]

Later model Fatboys have more wiring attatched to the unit than this bike...all the plugs for the speedo etc are included in the wiring harness..the tank needs to be removed to get at the plug that connects it all to the bike's main harness..total pain in the butt!! I'm just about to do this on my 2014 Fatboy!! Great video by the way!!

[@fletchergibson5574]

Just wanted to say thanks for the upload … great help to solve a simple problem.

[@rogeliosaavedra5970]

Thanks. I’m glad the video was helpful. Ride Safe 🤙

[@thecleverone]

Thank you so much had so much aggravation with that freaking piece

[@rogeliosaavedra5970]

No Problem. I’m glad the video was helpful. Ride Safe. 🤙

[@19TE72]

Thanks for the video, just what I needed. Didn't know if there was something more holding it in place so I was afraid of breaking those plastic tabs. :)

[@rogeliosaavedra5970]

No problem, I’m glad this video was helpful. Ride Safe.

[@westieBrucedavidson]

Hands of a surgeon Cheers mate

[@rogeliosaavedra5970]

LoL. I'm glad this video was helpful. Ride Safe.

[@mjagal]

hi looking for same part for my bike softail 2011 deluxe . how can i buy ?

[@rogeliosaavedra5970]

You have to go to a Harley-Davidson Dealership. That’s where I bought mine. Ride Safe. 🤙

[@RRC66TX]

thank you for sharing the knowledge

[@rogeliosaavedra5970]

No problem. Glad the video was helpful. Ride Safe. 🤙

[@DennieDiFilippo-hg9mn]

Thank you!!! Straight to the point…

[@rogeliosaavedra5970]

No Problem. I’m glad this video was helpful. Ride Safe. 🤙

[@donaldduck2801]

Great vid bro, like the voice accent, remind me at the American western Cowboy movies .

[@rogeliosaavedra5970]

Thanks, it’s that Oklahoma accent. Hope the video was helpful. Ride Safe.

[@patrickrobinson-mh5jw]

thanks needed to see this even in my manual it shows it but not how to remove it

[@rogeliosaavedra5970]

Sorry I just saw the comment. I'm glad the video helped. Ride Safe.

[@mathewmue5547]

Thanks sir! Mine went today and I was worried it would be costly

[@rogeliosaavedra5970]

Your Welcome. I’m glad the video was helpful. Thanks for watching and Ride Safe.

[@johnandrews3590]

Thanks for the information, was wondering which clips to press, pull and grumble at to get that silly thing out.

[@rogeliosaavedra5970]

You're Welcome. Glad the video was helpful.

[@brandontorres7557]

Awesome vid man thanks so much for sharing!!

[@rogeliosaavedra5970]

Brandon Torres thanks for watching. I hope the video was helpful. Ride Safe!

[@tonycutler9264]

Thanks Rogelio. Do you know if the same procedure works on a 2012 Softail Deluxe - without having to remove the fuel tank?

[@rogeliosaavedra5970]

I’m pretty certain the same will work with a 2012 Deluxe too. Hope the video was helpful. Ride Safe.

[@tonycutler9264]

@@rogeliosaavedra5970 Cheers Rogelio

[@tonycutler9264]

Just removed the console on my 2012 Softail Deluxe and checked the wiring loom. The connections are different from that of the 2011 model in your video Rogelio. One of the wiring harness connectors in under the left side of the fuel tank - so the fuel tank does need to be at least partially removed to access and disconnect the harness.

[@rogeliosaavedra5970]

@@tonycutler9264 I want to see a picture. That sucks that you have to partially take the tank off.

[@buster1173]

I just bought a couple months ago this kind of bike and I was inquiring on the speed, does it tell you the different gears you're in or only the sixth because mine only shows only when it's in six gear.

[@rogeliosaavedra5970]

Mine is the same. Only lights up in 6th gear. Ride Safe.

[@mosesperez8362]

Thanks bro:)👍🏾

[@rogeliosaavedra5970]

No Problem. I’m glad the video was helpful. Ride Safe.🤙

[@kevintsetse8440]

Do you know what type bulb the indicator assembly has?

[@rogeliosaavedra5970]

No idea because they don’t sell the bulb itself because it’s an LED. Once any of them go out you have to buy the whole assembly. Ride Safe! 🤙

[@jasonfoley4677]

Small world buddy. Just found this

[@horaciogonzalez3133]

Gracias !

[@rogeliosaavedra5970]

Glad the video was helpful. Ride Safe. 🤙

[@KrisHarrisnNeti]

Thanks just got same issue on my Fatboy Lo

[@rogeliosaavedra5970]

You're Welcome. Glad the video was helpful.

[@Robert_Mark_Norris]

Thanks!🎉

[@rogeliosaavedra5970]

No problem. Glad this video was helpful. Ride Safe. 🤙

[@warpigsbustedknucklegarage3683]

Thanks, Mine just gave up the ghost.

[@exsomes]

Hola cual es el nombre de esa pieza? No podemos conseguirla

[@rogeliosaavedra5970]

Se llama LAMP ASY,LED INDICATOR

[@rockerdeluxe2799]

I think this problem from INDICATOR LAMP BEZEL when you washing the bike like my bike

[@rogeliosaavedra5970]

I agree. I washed my bike by hand and rinsed with a power washer. I believe the pressured water was getting inside. I started to rinse off with a garden hose to see how long the indicator lamp will last me this time. It's been over a year and still working properly.

[@rockerdeluxe2799]

rogelio saavedra just put plastic bag or something on it 👍🏻 then wash

[@scrumthebum2451]

Just got mine for my road king. Damn thing has 4 other plugs. Part # 69200124

[@rogeliosaavedra5970]

LoL. I'm glad you're getting it fix though. I Mine has been working fine since I found out what I was doing to make it go bad. I was using a power washer and getting water in the lights when I crossed over. the instrument panel. I stay away from it when I wash it and haven't has problems with it since. Glad the video helped and Ride Safe.

[@scrumthebum2451]

rogelio saavedra Copy mine went out right after washing it. Smh 🤦‍♂️ and just like yours it’s the left signal & high beam indicator. I wonder if There’s a way to waterproof that area where the tiny LED’S meet the bottom of the housing.

[@rogeliosaavedra5970]

@@scrumthebum2451 well the dealership said they are sealed but I call bulls**t. you could probably put some thick super glue or epoxy to seal it up. If it happens to me again I'll try to seal it up that way.

[@scrumthebum2451]

rogelio saavedra Maybe run a bead of silicone around it.

[@sandymitchell8182]

I have the same problem my left turn signal dont show up when i press the signal switch,SO REALLY? i cant just change a bulb i gotta buy this whole new thingy for $50.What BS really HD REALLY?? I'll just look at my signal to make sure its on, what a gimmick harley does to its loyal customers, so if a customer brings their bike to service for this simple problem its gonna cost them $125 or more maybe? thanks for the video but im really pissed off,let go put my console back on. what a crock of BS harley

[@rogeliosaavedra5970]

Yeah, it sucks I cant just change the l.e.d. light bulb in it because it's a seal component. I've had this one on for awhile without any problems because I figured water got in it when I washed it. I tend to be careful around the console when washing it and it seems to have helped. Ride Safe.