This video demonstrates how to butt weld automotive rust repair patch panels from start to finish. **Eastwood's panel prep tool: • How To Achieve Perfect... / @lakesideautobody
Пікірлер: 303
@jeffallen6754 Жыл бұрын
After thirty years of welding for a living I learned guys on KZbin know more about welding than professional welders.
@toyotas4ever4 жыл бұрын
This video came just in time! Fixing to do a cab corner and going to try the 45 degree trick. That is so helpful. Thank you for all the info and great videos!
@LakesideAutobody4 жыл бұрын
You're welcome. You can use either method 45 (butt) or lap weld you patches. What ever is easiest for you. Both methods hold up well - moisture sits at the bottom not up where you welded. Good luck on you project. Here's one that was lap welded - kzbin.info/www/bejne/nIS3nIChhdeshrM
@user-tf5kr4qp2i3 жыл бұрын
Thank you, I’m trying to bring back my grandfathers 68 f100 and I’m a newb with welding and body work. Your videos are helping a lot with info and tips
@LakesideAutobody3 жыл бұрын
Thanks - that makes my day. Sounds like a good project - something you can really put your heart into. Let me know how it goes - Jerry
@dariopranckevicius12503 жыл бұрын
Great tip on making the 45 degree “valley”! Makes a ton of sense!
@LakesideAutobody3 жыл бұрын
Thanks - today's sheet metal is too thin to butt weld and grind flush. If you prefer butt, I really believe this is the way to go :)
@MOPERY6094 жыл бұрын
im in the middle of doing this on my car. I fixed the inner rocker and now im about to start on the outer like youre doing. Im glad i found this video to help me!
@LakesideAutobody4 жыл бұрын
Glad you could use the info - you can lap weld the seam or butt weld it - to me it makes no difference - if it's going to rust again it will start at the bottom where the salt water and debris sits - here's one on lap welding it - kzbin.info/www/bejne/nIS3nIChhdeshrM
@bluesman69553 жыл бұрын
Beautiful work Jerry. You aren't a auto body man, you are an artist! Very inspiring!
@LakesideAutobody3 жыл бұрын
Thanks Bluesman - I appreciate the support. Always good to hear from you :)
@miesuzuki2411 Жыл бұрын
Apa pulak artis..kalau artis xde nya ler dia nak welding ..baik dia main lain..
@securityguard57623 жыл бұрын
VANTASTIC, GREAT VIDEO, BOUGHT AN EAST WOOD WELDER TWO YEARS AGO AND FINALLY FIND SOMEONE THAT SHOW'S HOW TO USE. YOU ARE A MASTER. THANK YOU.
@LakesideAutobody3 жыл бұрын
You're welcome - glad you appreciate the video - have a great week :)
@olegregersen10244 жыл бұрын
You make it look so easy! great inspiration. Thank You.
@LakesideAutobody4 жыл бұрын
You're welcome
@moparnut62864 жыл бұрын
Great job like always really enjoyed watching you............ I'm currently taking the skin off one door to put on another by watching you I kept having really good results with my body work thanks and keepem coming!
@LakesideAutobody4 жыл бұрын
Great - practice makes perfect (almost) :) Glad the videos help you out - Jerry
@davidstepeck26443 жыл бұрын
This video was extremely helpful for my daughters C10! Thank you again.
@LakesideAutobody3 жыл бұрын
You're welcome - have a great weekend :)
@lawncuttingplusdelta2 жыл бұрын
I love ❤️ doing bodywork … you sir continue to inspire me . No nonsense , getter done , craftsman !!
@LakesideAutobody2 жыл бұрын
I appreciate the support my friend - glad to hear you love doing bodywork - me too :)
@bluelightguy14 жыл бұрын
Thanks for your great video’s I’ve been a mechanic for 25 years and have avoided my own cars body work but your videos have given me the inspiration to try it myself thank you
@LakesideAutobody4 жыл бұрын
Just like mechanics, you get better and better with experience - keep at it - I'll keep putting the vids up there's a lot more basic stuff to cover.
@BarrettAutoLife2 жыл бұрын
Same here!!
@gavincarroll25532 жыл бұрын
I'm getting a head start I guess it's not really bodywork but I have an old truck with rusted out hood hinge mounts I'm going to cut out and replace
@campuscab4 жыл бұрын
Cool giving eastwood a shout out. You and them are my go to when i am looking up videos
@LakesideAutobody4 жыл бұрын
Thanks - I know they're not going to give me one though :)
@bobgreen31163 жыл бұрын
@@LakesideAutobody I work at Eastwood and just came across your channel. I sent your info to the main guy. I will stay on top of this. I thought the welding class there and when the guy that designed that tool that you're talkin about I was raving mad about it it was awesome and she had Goose pimples at 2 is so needed
@Jayreganmusic3 жыл бұрын
@@bobgreen3116 I hope you set him up his videos are awesome and he always replies to questions.
@bobgreen31163 жыл бұрын
@@Jayreganmusic I am doing my best. We need to have him use some Eastwood tools etc. He is a very good guy!!
@bjr23794 жыл бұрын
Friday night auto body and some bottom shelf bourbon. 🇺🇲👍🥃 When I was young my job was pushing the two pieces together with a screwdriver while my old timer friend brazed or soldered the panels. Then I had to cool it down with a wet shop rag.. Good times! We always put a thin coat of short strand fiberglass on first to help seal the joint and then put plastic filler on top. Great video!
@LakesideAutobody4 жыл бұрын
Sounds like fun. The short strand fiberglass is a good suggestion.
@darrenlub4 жыл бұрын
I really enjoy ur video's. Thank you.
@LakesideAutobody4 жыл бұрын
You're welcome - glad you like them
@UndergroundPaintKing4 жыл бұрын
Another great video Jerry ...you make body work look easy 💪🏾
@LakesideAutobody4 жыл бұрын
Thanks my friend - you make painting look easy :)
@UndergroundPaintKing4 жыл бұрын
Lakeside Autobody thanks Jerry
@FBPrepping4 жыл бұрын
Dude you won a suscriber just in the part you mentioned using the pliers to make a 45` angle to make the weld more solid and easy, as we all know sheet welding is a samurai-like art that takes time to master. That little trick was awesome, without mentioning it improves the general mechanic resistance of the seam a little bit.
@LakesideAutobody4 жыл бұрын
Glad you liked it - thanks for subscribing
@rorog61874 жыл бұрын
Great job!! New subscriber here, keep on posting videos. Im learning a lot, thank you!!
@LakesideAutobody4 жыл бұрын
Thanks - I'll keep them coming
@SteveStoltz4 жыл бұрын
Great video as always 👍🏻
@jamesjetson3812 Жыл бұрын
I know my job is not going to go this smoothly. But this is very educational, i like it.
@Xmonders2 жыл бұрын
Thnx so much for sharing 👍 This is a professional body repair and paint job!!!!
@LakesideAutobody2 жыл бұрын
Thanks my friend and you are welcome - have a good weekend :)
@gordonhampton3429 Жыл бұрын
My son and I r working on a 1961 c10. Lots of rust & welding. First time doing it have learned so much from videos thnxs
@LakesideAutobody Жыл бұрын
You're welcome Gordon - let me know how the truck turns out - those were good looking trucks :)
@towboatjeff4 жыл бұрын
I going to be trying my luck with welding some patch panels in my old pickup. I have one of eastwoods perfect panel prep tools ordered. Thanks for the info ive been watching all the videos i can to get a better idea of how i need to do this project.
@LakesideAutobody4 жыл бұрын
Let me know how it goes and how the prep tool worked for you.
@towboatjeff4 жыл бұрын
@@LakesideAutobody I'll let ya know. I still have to pick up a gas bottle for my welder and a few other odds AMD ends before i really get into this project.
@adamwade61838 ай бұрын
Hi just started watching some of your videos few months ago. Like your work. You earned another sub👍
@LakesideAutobody8 ай бұрын
Thanks Adam - Glad you like the work. Here's a video on longevity of these repairs (if interested) - kzbin.info/www/bejne/nXq2YoeYq5x-rNk
@Pappy042 жыл бұрын
Good job man,Have done many of them w/door on car !
@sudalaimani16532 жыл бұрын
Beautiful job
@rbelang83313 жыл бұрын
A Citroen Ami in your area is pretty darn rare thing... Nice & pragmatic demo; I like your work flow...
@LakesideAutobody3 жыл бұрын
Thanks - glad you enjoyed it. Yes - very rare car but pretty cool if you can find one that's in relatively decent shape :)
@supernube50514 жыл бұрын
Lakeside Autobody Another good video I've just learnt from ... thanks. Just liked ... and subscribed.
@LakesideAutobody4 жыл бұрын
Glad you enjoy them and thanks for subscribing
@richardsmart22554 жыл бұрын
This is something I want to be able to do. I've only thicker metals with my everlast welder but body panels would be cool.
@garyhoops42273 жыл бұрын
On the panel you welded why not glue it ? Glue is better for rust protection. The back of the panel that got welded if it is bare meter it should have been painted!
@alzzla27304 жыл бұрын
Thanks for another great video
@LakesideAutobody4 жыл бұрын
You're welcome :)
@husky12324 жыл бұрын
Great video very informative thank you
@LakesideAutobody4 жыл бұрын
You're welcome
@goneplatinumpaintlessdentr31022 жыл бұрын
Love your videos I did a 37 Chevy door today
@LakesideAutobody2 жыл бұрын
I appreciate that my friend. How did the door turn out? My email is schoolvideolibrary at gmail dot com if you ever want to send some pics of your work - would love to see it :)
@motorv8N28 күн бұрын
Nice job! Just learning to weld and that 45 degree valley is a great tip.
@LakesideAutobody28 күн бұрын
Thanks 👍- stick with it - here's what my first boss told me when I said I never used a MIG - kzbin.info/www/bejne/Z3O8on-DlNKMZ9U
@corkywillis3 жыл бұрын
Thanks, I just learned something !
@LakesideAutobody3 жыл бұрын
You're welcome :)
@paulone-off72863 жыл бұрын
That was nice work on that patch panel, like what you did creating a bevel to take the weld
@LakesideAutobody3 жыл бұрын
Thanks 👍
@ninja636393 жыл бұрын
@@LakesideAutobody Does that help it to not warp as well?
@LakesideAutobody3 жыл бұрын
@@ninja63639 Maybe a little bit but if you get it too hot it still will distort. Good thinking though - have a good weekend
@superc43084 жыл бұрын
Great work 👍🏻
@LakesideAutobody4 жыл бұрын
Thanks :)
@CHASINGMUSCLECARS4 жыл бұрын
I'm up to the point where I'm trying to save a door. Funny you post this. I mentioned you in the video.
@LakesideAutobody4 жыл бұрын
Thanks for mentioning me - what kind of door are you saving?
@CHASINGMUSCLECARS4 жыл бұрын
@@LakesideAutobody video to come soon.
@brandonpriest36046 ай бұрын
Bruhda, thanks for making this video. Im actually in this same situation with my old square body, the truck has no rust except the bottom of the doors. Previous owner was vigilant with rust prevention here in Ohio. But ya. Thanks man.
@LakesideAutobody6 ай бұрын
You're welcome - here's a playlist on the square body you might be interested in - kzbin.info/aero/PLOP9eoG14-I8mto72e0di1Q_URvGUlYfQ
@TK421384 жыл бұрын
Nicely done. 👍
@LakesideAutobody4 жыл бұрын
Thank you! 👍
@LetsFigureThisOut3 жыл бұрын
Very good video!
@LakesideAutobody3 жыл бұрын
Thank you very much - have a good week :)
@ChrisB1193 жыл бұрын
Good watch, thanks for the tips!
@LakesideAutobody3 жыл бұрын
You're welcome :)
@aarond44842 жыл бұрын
Thanks for the great video and nice body work!👍
@LakesideAutobody2 жыл бұрын
Thanks and you're welcome Aaron - have a great end of the week :)
@1keykneedeep4 жыл бұрын
Wow. Looks awesome
@LakesideAutobody4 жыл бұрын
Thanks
@josephpuchel64973 жыл бұрын
Hey new subscriber. Yes like the way that 45 degree butt welds together. Any new techniques to make a job better and easier fit is best especially when metal panels are thin. Excellent video
@LakesideAutobody3 жыл бұрын
Thanks - glad you liked it :)
@Lupinsx2 жыл бұрын
Great Video thanks!!!
@LakesideAutobody2 жыл бұрын
You're welcome SV - have a good weekend :)
@ridinrancher94433 жыл бұрын
Great video. I have a question, can similar be done with creating a lip edge on the patch panel to go under the original and welding it similar to how the bottom was done?
@LakesideAutobody3 жыл бұрын
There really are no rules so if it works for you then it is a quality repair. You just want to make sure that what ever method you choose works on absolutely everything so that you become efficient. The only problem I see w/ going under is that if you have a round rust hole - how do you get the patch behind if you don't have access to the inside of the panel - many situations like that - rockers, dog legs, lower quarters and fenders, doors etc. Let me know if that answers you question - Jerry
@sanfuegoboy4 жыл бұрын
Nice job 👍🏻
@LakesideAutobody4 жыл бұрын
Thanks 👍
@frankm85334 жыл бұрын
Damn looks pretty good👍
@LakesideAutobody4 жыл бұрын
Thanks :)
@JeffOrcutt-sr6yf Жыл бұрын
Nice job
@LakesideAutobody Жыл бұрын
Thanks Jeff :)
@boxchevydame4 жыл бұрын
Good video 👍
@LakesideAutobody4 жыл бұрын
Thanks
@Curt-do7cl Жыл бұрын
Good video. I am attempting to repair rot on my Ford van bought a replacement panel but I have never welded I will have to do similar make a cut remove some of rear panel can you tell me what kind of welder to use and any pointers. I prefer to do it properly than pop rivets as I did when I was younger. Worth trying to mimic you
@LakesideAutobody Жыл бұрын
Thanks Curt. This is how easy it should be to weld after you set up your welder - kzbin.info/www/bejne/Z3O8on-DlNKMZ9U As for what type of welder - that depends on the $ you have. You can't ever go wrong with a 110v Miller MIG welder - the cheapest MIG they have will work great. If you don't have the $ for that, I suggest this one - kzbin.info/www/bejne/Z3O8on-DlNKMZ9U It's all I use right now and it welds great - much like the Miller. Getting repair parts will be impossible but I don't see it breaking down - it's built pretty well :)
@pdiz5 ай бұрын
My old classic has the paint cracking where the putty has cracked beneath it. Any way to stop stress cracks with putty, or was it just shoddy work by an unskilled person? Or does putty always eventually just crack over time?
@LakesideAutobody5 ай бұрын
Body filler should never crack over time. Sometimes instead of using filler, a body man will use a ton of primer surfacer or lacquer putty to help get a panel straight. Your supposed to get it straight with just filler but that is sometimes hard to do. Anyway if you cheat with thick primer or putty it can shrink and form cracks. Not sure if that is exactly what's going on with your car but..... Any way, there's really no way to stop the cracks except to remove the old filler and do it right the next time around. Ask more ?s if that didn't help.
@guillermonieri42034 жыл бұрын
Thank you.
@LakesideAutobody4 жыл бұрын
You're welcome
@natetracy67014 жыл бұрын
Nicely done. What are your thoughts on using metal etching primer before applying filler?
@LakesideAutobody4 жыл бұрын
I don't think it's necessary. I've never seen it or heard of it being used in high volume body shops. I do think there is a specific process to use though and that is prepare the metal with 36 grit fiber resin disc such as this: www.harborfreight.com/7-in-36-grit-resin-fiber-sanding-discs-3-pc-69641.html Grind slow to reduce heat and always aim to cut/scratch the metal instead of rubbing/shining the metal. If you are putting filler over paint check this video out - kzbin.info/www/bejne/oaCwqGljltqif9U Hope that helps - Jerry
@rayoliveira33252 жыл бұрын
Boa tarde amizade. Muito boas as ideias 💡 pensamentos positivos. Dar pra entender melhor o jeito que você demonstra na prática e semelhança em confeccionar móveis de laminados
@LakesideAutobody2 жыл бұрын
Gracias.
@CA-pv5ie4 жыл бұрын
Love your videos - very helpful! In some of your older videos for something like this you lap weld and then knock it down to then fill. Here you switched styles - do you like this style more now?
@LakesideAutobody4 жыл бұрын
I still like and will always prefer lap welding. It's faster, it works just as well and any other method, you can do very large odd shaped rust damage. There's no rust hole that can't be fixed using lap joints. Remember, every car is lap welded together. The floor even has lapped seams (with no weld through primer) and it lasts for a very long time before the rust gets it.
@snoopu26014 жыл бұрын
Yeah I saw a video it was a gas tank door he did that method of butt welding. I guess you can use anyway that works for you. I made my patch panel before I did any cutting to make shire I was able to make it, so I didn't just have a big whole. I used old broken appliance fridge metal was the same thickness work well
@LakesideAutobody4 жыл бұрын
@@snoopu2601 You are absolutely right. You pick the method that works best for you and your situation. Rust will begin at the bottom of the panel where salt water and debris gather anyway not up high where you seam is.
@armandogarza74462 жыл бұрын
good video
@LakesideAutobody2 жыл бұрын
Thanks :)
@rodgarcia656311 ай бұрын
How do you keep the inside of the door panel from rusting from the inside out with no paint over the bare metal? I always wondered that when watching body repair videos. Thanks for the video!
@LakesideAutobody11 ай бұрын
You're welcome - here's the best way to prevent rust on any car. Even new panels have nothing coating the pinch welds where metal is sandwiched together. You have to have an undercoating that can penetrate and creep to coat everything that can't get coated with paint or undercoat. kzbin.info/www/bejne/bonEi3WvbKx2baM
@tiredoldman53292 жыл бұрын
Good info. Thanks....
@LakesideAutobody2 жыл бұрын
You're welcome TOM - have a good week :)
@elian2224 жыл бұрын
I'd love to see more on how you fashion your patch panels from sheet metal stock :-)
@LakesideAutobody4 жыл бұрын
I'll do a video on that with some detail
@Gareth96v12 жыл бұрын
Why do you body filler the whole patch and not just the area where you welded? I'm about to try to replace the real quarter panels on my '97 jeep. I bought the panels and they are already painted/primed. Do you only body filler the whole piece if it's bare metal (vs what you ground off of a prefab primed panel)? Thanks
@LakesideAutobody2 жыл бұрын
Because usually the patch is not perfect and there are small waves, dips or whatever here and there. Might as well just get it all at once and be done. It is possible to just do what you're saying but filler is so cheap that you actually save time and get it straighter doing this. Hope that helps a bit :)
@feralfreebirds3 жыл бұрын
Great video, im wondering after seeing another video this morning on plug welding, if i can use this method to replace all my sills on van? he used plug welds every 2 inchs & caulk sealer. stuff( i dont know wht its name is?) ...wondering if it would be ideal , so i dont have to weld all the way along, as im beginner....but def gunna do the work myself!!
@LakesideAutobody3 жыл бұрын
I think you'd be fine plug welding and using auto body seam sealer - it won't look perfect but it will work for a daily driver - www.amazon.com/ACDelco-10-2013-Joint-Filler-Compound/dp/B007Q0ZQGK/ref=sr_1_1?dchild=1&keywords=ACDelco+10-2013+Body+Joint+and+Seam+Filler+Compound+-+10.1+oz&qid=1594661368&s=automotive&sr=1-1 Let me know how it goes or what you decided to do - Jerry
@feralfreebirds3 жыл бұрын
@@LakesideAutobody cheers Jerry....i will do
@steelyerface21 Жыл бұрын
I didnt see any seam sealer used on the welds ? did you use that prior to the body filler or not?
@LakesideAutobody Жыл бұрын
No - it's not a good idea to use seam sealer under filler. Although I don't have any solid proof that it's bad - just never saw it done in a body shop. Something that would work though would be fiberglass reinforced filler which is water proof and would act like a seam sealer.
@Benny46drift3 жыл бұрын
Rasp, I can never find mine when it comes to smoothing up
@chrismitchell453 жыл бұрын
I’m really regretting buying the Titanium Flux 125. Not that it’s bad because it’s actually a good welder. Being purely a flux welder, it doesn’t have the traditional gas nozzle. I’m having to get the perfect lighting to actually see where the wire is and many times I don’t hit the seam because the welding helmet I have is crap lol. It’s a Harbor Freight as well and it was $59. I didn’t get the cheapest dammit! Watching you effortlessly spot weld because you know where the wire is in relation to the nozzle leaves me shaking my head and cursing my utter failure at welding research! 😂 Another great video.
@LakesideAutobody3 жыл бұрын
Maybe you can switch out the nozzle. Remove your nozzle and go to HF or a welding place and get one that surrounds the wire / contact tip. Do you have an auto darkening helmet?
@chrismitchell453 жыл бұрын
@@LakesideAutobody I already tried an HF MiG nozzle and no joy. It doesn’t have threads to go in place of the stock nozzle and it’s too small to go over the stock one. The helmet is auto darkening but it’s default setting is about 6. That and the wire color is pretty close to the color of the metal. I’ll probably sell it to my friend and get a combo off of Amazon that has flux core and solid capability. I’m just learning so it is what it is. Another thing I don’t like about it, there is no explanation of what the settings, (numbers and letters) equate to in inches and volts. It’s a constant reminder that one should never buy an old English Land Rover.... from eBay,..... when drunk 😂
@LakesideAutobody3 жыл бұрын
@@chrismitchell45 Don't do anything important when drunk! If you're serious about learning to weld and want a welder for the rest of your life - save your $ and go buy a Miller 110V MIG. Like this one: www.millerwelds.com/equipment/welders/mig-gmaw/millermatic-141-mig-welder-m00486
@stanleylosh1899 Жыл бұрын
A word of caution to the newbees with an air file. They are fantastic tools for getting a flat panel but if you let your pinky wander down between the body of the file and the clamp for the paper, it will hammer your fingernail 35 times before you can move it or stop the file.
@LakesideAutobody Жыл бұрын
Great tip Stanley :)
@NEOATHS4 жыл бұрын
I have a question, did you completely fill the valley with weld and then grind it level or did you leave a bit of a valley and level it off with filler?
@LakesideAutobody4 жыл бұрын
Left a bit of valley then filled it. I totally disagree with grinding welds flush. It compromises the integrity of the weld, the surrounding metal and is a big waste of grinding discs or other material. Knock it down and fill it. It lasts longer too.
@pauldailey44773 жыл бұрын
Do you have to sandblast and paint the inside of the door? Do you normally do that first or after the welding repairs are made?
@LakesideAutobody3 жыл бұрын
Yes, you can cut all that in (paint it) before you paint the whole car. Remember - after painting the only thing you should have left to do before shipping it is unmask it. I like to have everything done so I don't mess up the nice paint job.
@Steve3403 жыл бұрын
Right on man !
@LakesideAutobody3 жыл бұрын
Glad you enjoyed it :)
@wadesoutdoors19142 жыл бұрын
Only question I have . When you use the clanging tool . Say it’s a 1/4 inch flange . Do you need to add a 1/2 inch back on to new piece ?
@LakesideAutobody2 жыл бұрын
If the flange on one panel is 1/2 inch then, yes, you'll have to have an extra 1/2" on the other (to overlap).
@malcolmyoung7866 Жыл бұрын
I like it…👍🏻
@stanherman56043 жыл бұрын
did you drill some drain hole in the bottom of that door so water can get out? or is the door going to fill up with water every time it rains?
@LakesideAutobody3 жыл бұрын
Yes - drilled 3 - 3/8" holes at the lowest points. If it's your car or truck, the bigger the hole the better so that water and debris can exit. You can even blow it clean every now and then and make sure the drains are open - very important for rust prevention.
@ricardosmythe25482 жыл бұрын
What welding setup do you have? I find when I try to weld panels I end up burning through the thin steel
@LakesideAutobody2 жыл бұрын
I have a Miller Millermatic 90, 110v, 80/20 argon/co2, .023" wire
@northerniltree4 жыл бұрын
A buddy told me he was butt welding and I said he should go to church. Now, I know what he meant.
@smartysmarty17144 жыл бұрын
What happens at church, stays at church....
@happy043464 жыл бұрын
You silly
@PC_CERTIFIED4 жыл бұрын
that made me laugh I'm usually a grumpy bastard and or rude old bastard "ROB"
@luvskippy3 жыл бұрын
Oh no you were right with your first thought!
@rbelang83312 жыл бұрын
I was wondering Jerry: if you do not have access to the backside of your panel, should you paint before you weld (maybe using Weld-through primer, for exemple)? Thanks!
@LakesideAutobody2 жыл бұрын
There is really nothing that is for sure to use on the back side. You can try all the ideas out there but the best way I have found is to make absolutely sure the panel can drain and stay dry on the inside and that the pinch weld or bottom of the panel has some type of protection that stays fluid or does not harden and eventually peel and trap moisture - here's an example - kzbin.info/www/bejne/bonEi3WvbKx2baM
@rbelang83312 жыл бұрын
@@LakesideAutobody Alright thanks...
@YoutubeGold-dc5fd3 жыл бұрын
how do you keep from blowing through the panel while using the mig. what is the welder and settings?
@LakesideAutobody3 жыл бұрын
If you blow through there is usually two cures. 1) turn the heat setting down (mine is usually on 1 or 2) - there are 4 settings. 2) shorten the time on trigger - In other words just a very short squeeze of the trigger - enough to get a weld but not burn through. Ask again if that didn't help.
@shockwave682 жыл бұрын
Question. Ive been dealing with a local restoration shop, and he told me under no circumstances do they recommend doing the 45* the lips on butt welds. His logic was that it leaves a slight opening in the V channel on the backside where moisture can get trapped in, and it has the potential to create rust and ghost lines, since you generally cant get on the backside to seal it up/knock down the lip. He also said its harder to manipulate the metal due to the difference in thickness along the channel line. Whats your take on this? Is it something you've ever seen or had issues with? Im curious if its as big a deal as he made it out to be.
@LakesideAutobody2 жыл бұрын
People will say a lot of things if they don't use that specific process in their shop. The facts are is that every method works well if done in a way that makes it work. Body shops should be proficient at all methods in case the customer wants it done in a specific way. There is no truth in the, "slight opening idea" - none at all. Here's some info that may help you make your own decision on whats the best method for you - watch all of them very closely and it will make sense to you - See these videos for information on why the highest quality Michigan/Detroit area body shops use this method: kzbin.info/www/bejne/gHqsoKGAhLulpZY *** Also see Eastwood’s explanation: kzbin.info/www/bejne/qKGrZmOhnZmKZpI *** For longevity of this type of repair see: kzbin.info/www/bejne/bonEi3WvbKx2baM
@pwner3dan Жыл бұрын
Never used this method myself, usually tig or oxy weld the panels together. however the difference is this takes about a third the time that it would take me to do it. mine ends up like a new panel like from factory but there is very few customers who could afford to do that to all the parts of a car in a restoration. this is a much more efficient use of labour and ultimately still will last a very long time. Ghost lines will occur more due to lack of time waiting for the shrinkage of fillers and primers to occur before paint not so much the valley being here. i have actually never seen this method although i can 100% see benefits this would have over conventional butt welding with a mig, and flaws.
@ogvega71 Жыл бұрын
After tac weld, do you weld all the way through even ?
@LakesideAutobody Жыл бұрын
You can - One guy I worked for made us weld solid all the way but we always cheated and never had return work. I think it does well both ways because when you tap the seam down, the filler acts as a buffer between the seam and the finish. That's how they did sail panels in the factory - the roof was connected in a valley to the quarter and lead or filler was used just like this process. Have a good weekend Oscar :)
@MrSteveespo2 ай бұрын
Isn't it best to use epoxy primer such as DP-74 before putting the filler on? To prevent rust from bubbling the filler up.
@LakesideAutobody2 ай бұрын
It is not necessary as the paint protects everything under it. That's an internet/magazine wives tale thing. Body shops put filler over properly prepared metal. Here's a good video on the topic too - kzbin.info/www/bejne/rYfLgn-nhaZ6jLc
@franksgarage85512 ай бұрын
I have a tool for putting a step in for lap joint. I would like to avoid having that 45° bend sticking inside door. But your bend will reduce warpage.
@LakesideAutobody2 ай бұрын
The step can work too - thanks for the input Frank - enjoy the week :)
@mindaugasvaiciulis17913 жыл бұрын
Just beatiful..:)
@LakesideAutobody3 жыл бұрын
Thanks Mindaugas - have a good weekend :)
@Topper-gf8xl3 жыл бұрын
Thanks for the video. I've seen others epoxy coat the bare steel before filling, is there an advantage to how you are doing it?
@LakesideAutobody3 жыл бұрын
No body shop that I have worked at ever used anything prior to spreading the filler. Sanded/Ground (w/ 36-40 grit fiber resin disc), clean bare metal is a great surface for filler to stick to. The idea behind using it is corrosion protection. I don't think it would hurt if you wanted an extra layer of protection and I can see how it might help if moisture got through the welded seam. but it's not necessary especially if it's just a dent or your seam was welded solid. Hope that helps a bit :)
@Okie-Tom4 жыл бұрын
Good work Sir! What primer surfacer do you use!
@LakesideAutobody4 жыл бұрын
Lacquer primer - I know it sounds old fashioned but it works well, drys fast, builds fast, sands easy, you can mix it thick or thin, and you can leave it in the cup and it won't harden - real cheap too :)
@Okie-Tom4 жыл бұрын
Lakeside Autobody. Hey, if it works for you, use it! Everybody has their own system. My absolutely favorite primer surfacer is called "All-U-Need". Made by Clausen's. Basically a spray polyester primer filler. Works great for me! Take care and quarantine yourself if you can. The virus is bad stuff!
@almierz46044 жыл бұрын
What did you use on your air filer 40G paper.
@LakesideAutobody4 жыл бұрын
80 grit on a rubber block. Sometimes if you're sure that it's perfect you can hit it with the DA as you feather edge the paint.
@erichzimmerman7974 жыл бұрын
You make it look easy, Jerry! On the top edge of say a rocker panel patch, would you recommend the 45 degree butt-weld over flanging/lap weld, if either one were possible? I'm currently butt welding the driver's side rocker patch on the van I'm working on, but might try flanging the one on the other side to compare strength and ease of filling. I suppose it depends on the vehicle, but wanted to get your opinion. The Caravan I'm doing is unibody. Thanks again, I love your channel!!
@LakesideAutobody4 жыл бұрын
You'll get a ton of different opinions but to me it doesn't make a difference because panels start rusting from the very bottom anyway. Do what's easiest for your situation. The way you prevent rust after the repair is really what counts - see this vid.... kzbin.info/www/bejne/eqLbfnt5nt-ei6c
@KevinRoadrageGarage2 жыл бұрын
Trying to learn the best way to put a cab corner on my 1996 chevy silverado regular cab
@LakesideAutobody2 жыл бұрын
The best/simplest way this to use either of these methods - kzbin.info/www/bejne/f2m5h5-Pha6cnaM or kzbin.info/www/bejne/rYPPYoScoNd1m7s Here's the follow up video after 3 winters on salted roads - kzbin.info/www/bejne/nXq2YoeYq5x-rNk
@KevinRoadrageGarage2 жыл бұрын
Thanks I appreciate it
@Gdaywogs2 жыл бұрын
Bog magician
@gamatron173 жыл бұрын
are you supposed to use a etch first on bare metal before bondo?
@LakesideAutobody3 жыл бұрын
No, it's best to use a nice sharp fiber resin 36-40 grit disc to prepare the surface. Filler will never chip, bubble, peel, or fall out if put over a correctly prepared metal surface.
@jwaynus46764 жыл бұрын
Great video, but you skipped over the welding a bit too quick. Did you just spot as shown or continue to spot across the whole panel? Also would this work similarly with gasless mig?
@LakesideAutobody4 жыл бұрын
I continued to spot across the whole panel. I tried flux core wire once but did not like it as much as the gas. I thought it was a little dirtier but maybe I didn't give it enough of a chance. I know it can be done though - I just like the gas.
@mattnewby123 Жыл бұрын
as a welder by trade, I would always work from the center out to minimize warp...
@LakesideAutobody Жыл бұрын
Good thinking - thanks for the information Fergus M - have a good week :)
@kevinparent884310 ай бұрын
why arent you trying to flat it out bywelding without filler ? does it has chance to crack in time
@LakesideAutobody10 ай бұрын
This video explains why: kzbin.info/www/bejne/gHqsoKGAhLulpZY
@VITOSGARAGE4 жыл бұрын
Hello sir. What is the best automotive filler to use?
@LakesideAutobody4 жыл бұрын
I use the most inexpensive (19/gallon). It's all the same. Others will say not but it's how you prepare the surface that really counts.
@VITOSGARAGE4 жыл бұрын
@@LakesideAutobody thank you sir!
@LakesideAutobody4 жыл бұрын
@@VITOSGARAGE You're welcome
@websurfer15854 жыл бұрын
Is it not best to primer bare metal before applying body filler?
@LakesideAutobody4 жыл бұрын
No one primes bare metal in a body shop before applying filler. If there is a company trying to sell that, I would not take the bait. In 40 years, I've never had filler come off, crack, fall out, bubble, etc. If your surface is prepared right (sharp grinding disc, sand blasted welds, very clean, no rust holes or rust it will be stuck on there forever. Just telling you what I know so you don't waste $.
@robertmccully27922 ай бұрын
I just noticed you replied to my comment, once i clicked on the comment of yours i read it, than it was no longer there. Weird.
@LakesideAutobody2 ай бұрын
I forgot what the comment was but I'll look for it in "Held for Review" maybe repost it :)
@pettingellhammer2 жыл бұрын
That’s not really a true butt weld. The big disadvantage is you can’t hammer & dolly that weld seam to take care of any shrinkage problems that may occur.
@ElrodsGarage4 жыл бұрын
Nice vid. I like your work. Are you playing guitar in your intros?
@LakesideAutobody4 жыл бұрын
Yes I come up with the intros and play them. I always had a liking for heavy metal. Right now I stuck on FFDP and Shinedown (Monsters). I'm think I supposed to be too old for that stuff but...
@ElrodsGarage4 жыл бұрын
@@LakesideAutobody Never too old for good music. Keep rockin!
@LakesideAutobody4 жыл бұрын
@@ElrodsGarage Check out Heart doing Stairway to Heaven live at the Kennedy Center - Awesome!
@ElrodsGarage4 жыл бұрын
@@LakesideAutobody I have seen that one. It's awesome. I like Robert Plant's reaction to Anne Wilson's performance.
@LakesideAutobody4 жыл бұрын
@@ElrodsGarage Yes - brings him to tears. I like watching the people in the crowd just loving it - great great performance - lots of pressure but nailed it.
@philliparthur86722 жыл бұрын
I have a question, where do you get the metal from? Do you get it new or used? Hopefully you get this message
@LakesideAutobody2 жыл бұрын
Alro Steel in Grayling Michigan but you can get it from any metal supply place. - A1008 Cold Rolled Steel Sheet
@philliparthur86722 жыл бұрын
@@LakesideAutobody Hey thanks alot for messaging me back I live in Ohio so I should be able to find some. Thank you again for the information and have a great weekend.
@TheRaulr1514 жыл бұрын
hmm...40 grit on the sander....think he had some more sanding to do since he didn't feather the filler edges and go up the grits to remove scratch marks.
@LakesideAutobody4 жыл бұрын
You can hit it with 80 on the block or some guys hit it quick with the DA while they are feather edging. I use a hog with 80 to knock down the grinder marks in the paint first to make it easier to DA with 120 so sometimes I hit with that also.
@bjr23794 жыл бұрын
What do make your patch panels out of?
@LakesideAutobody4 жыл бұрын
A1008 cold rolled sheet metal - 20 gauge - 4X8 from Alro Steel You can use anything from 20-22 gauge or .030 to .035. Thicker for the real old stuff 40s and 50s
@perillouss35064 жыл бұрын
Just curious , how much time did this repair take?
@LakesideAutobody4 жыл бұрын
2-3 hours. In a shop though you would lap weld and it shouldn't take any more than an hour.