Roland VersaCAMM SP-540i Manual Cleaning

[@jsingh6484]

Enjoyed this clear demo and without unnecessary banging music in the background

[@djpuppy28]

Getting one this week. Not the same model but the functions are similar. Thanks for this. Few and far between finding vids like this.

[@dannytorres8326]

Awesome video, hit pause if you don't want to wait for it to completely heat up.

[@hemidesign]

I used to work for Roland, and the secret is.. you CAN touch the surface of the head, 100% safe.. We used to do daily repair and cleaning on the sides and the surface of the print heads! We tell people do NOT touch of the surface of the head because we want you to spend some MONEY and send your Roland printer for repair.. that''s all!

[@Westvillin031]

This is an absolute lie... customers get informed not to touch the underside of there heads due to the fact, that if they do it incorrectly they could damage the head and that can end up a costly affair.

[@eyespy1415]

People have no idea, and thats probably good. It's an easy way to sell them a new head and keep their old one, give it a quick clean at home and sell it as a near new one for $100 bucks less.. Instant profit for 10 minutes work and 20 mins max for a printhead alignment.

[@Legend227]

@@Westvillin031 It isn't lie. Touching the bottom of the head won't destroy it.

[@BeeshaGadaBeesh]

Thank you for your time, it was a very good tutorial and helped me out a great deal.

[@lalo19851]

I'm glad. You're welcome!

[@deborahnewmark5052]

Excellent instruction.

[@zubiehamid4425]

Can I use this ink in my Apson L850printer

[@paulistadecoracao]

excelente vídeo de instrução para limpeza....👍

[@printanet9291]

Hi, very clear and precise. My roland is not printing at all, only cuts. I used it the day before public holiday and had one day off when we came back it was not printing.please help

[@lalo19851]

Check the Versaworks options...It might be set to "cut only"

[@ksedmon]

thanks a lot. really did me a lot of help

[@Westvillin031]

Not a bad tutorial bud but u just a little misinformed. The caps "do not" have sensors inside them at all..... it is a full plastic part that allows for ink flow to the drain bottle when cleaning as well as capping your head to prevent it from drying out.... it is actually recommended that u put a little cleaning solution in the cap after cleaning them

[@lalo19851]

Thank you for your insight. I always assumed there was a sensor sitting at the top of the cap. There is a "wire" with a small "lenticular-looking" ring in the middle of both caps.

[@aaronsuepaul495]

i bought a used printer a couple days ago..how often do i need to do a cleaning and how often do i need to print to keep the heads from drying out? and whats the recommended cleaning sloution to use?

[@andrewnandjembo9662]

Roland VP540i printing one color only. what should i do to solve it? i tried cleaning several times and head flashing but still not coming right.

[@OldGeezer55]

Can you add the procedure of cleaning the bottom wiper blade. I know you remove the 2 allen screws, but don't remember where to go from there. I know it's simple but others might appreciate the knowledge as these wipers do wear out too. THANKS FOR THE KNOWLWDGE

[@ravioprinting4502]

how it can use just 2 printhead? can my roland RS640 use this methode?

[@lenoresdreamylife]

Thanks much! cleaned up today!

[@lalo19851]

You're welcome! I'm glad you found it useful.

[@KelvinAquino]

Ey! Hermano una pregunta? El Plotter Roland SC - 54 5EX que he subido a mi canal de KZbin es el mismo que aparece en este vídeo? Si me respondieras te lo agradecería a ti o a cualquier persona que lea este comentario.

[@TheKhandesign]

Thanks brother, it worked for me,

[@jrborquez]

Eduardo, how do you install the cleanning scraper, the one the wipers clean from. Everytime a hold it, it gets of the place.

[@lalo19851]

JOSE ROJO Hi Jose, I've never had to replace that part yet, so I'm afraid I can't be of assistance. sorry.

[@jrborquez]

you have to clean it each time you clean the wipers, is the one the wipers scrap each time it cleans the head.

[@israelcastillo8450]

Colega disculpa las molestias pero podrás hacer un vídeo pero en español 😅

[@cebeone]

THANKS FOR SHARING !!

[@achillekamga2856]

Merci pour la procédure. Très instructif

[@luisesqui1]

una pregunta amigo como configuro la limpieza automatico en el panell del control

[@lalo19851]

La limpieza automatica no se puede configurar. Solo se puede ejecutar desde el panel de control. Al presionar "Menu" navega con los botones de flecha hasta llegar a "Limpieza" o "Cleaning". Selecciona "Normal" y presiona "Enter". Esto lo puedes ejecutar en caso de ver lineas disparejas en tu impresion de prueba y funciona la mayoria de las veces. Cuando no ves resultados satisfactorios despues de ejecutar esta limpieza es cuando necesitas hacerlo manual como se muestra en este video. Espero te sirva esta informacion. Gracias.

[@greenjellybean08]

Hey Eduardo Felix, have you ever had any problems with discoloration from your printer? I have the same printer as you do and I keep having the issue of everything I print having a green tint. I have cleaned and cleaned and it still has the issue. Any ideas?

[@lalo19851]

Jessica Blackwell Hi Jessica. I've never had that problem before. Are you using OEM Inks?

[@greenjellybean08]

No, it's not OEM and I knew when the organization purchased the off-brand that there would be a risk in doing so, but I don't always have this problem. Every once in a while it will come up. And it seems to just fix itself. I think it's probably the case when the printer doesn't get used as much. Any idea how to go about resolving the issue? I'm running out of ideas.

[@lalo19851]

Jessica Blackwell I'm not sure what the problem could be. It sounds like it could be contamination in the ink tubes, but I'll be honest I've never dealt with this issue before. Sorry I couldn't be of much help.

[@greenjellybean08]

Eduardo Felix I think you're right. I'm going to keep researching. Thank you SO much for responding though! Your video was great!!

[@jrborquez]

Jessica Blackwell send photo so I can help you, it could be contaminated, you have to make a hard cleaning, how can you know? make a test print from the meny, and you will find out, if so, print but this is wrong, because you get green by mixing blue and yellow, and they are separated, I use a SP 540v. It could be the encoder strip, you can clean it with isopropyl alcohol.

[@phototec]

You said there are sensors in the sponge area a of the caps tops, that is NOT correct, there are NO sensors in the cap tops!

[@mark33sv]

What kid chemical cleaner do use?

[@lalo19851]

We use the inhouse brand from Tubelite

[@user-wt8nz8tc4e]

Sur! C'est très bien, mais il fallait que ça soit en français pour nous autres ici au Congo ❤

[@jaouadmedkor1875]

meny tks freind

[@antonyshaw9651]

you need to clean your platen also

[@fozlonas6218]

so faltou o foco

[@kraaiize]

Iup

[@antonyshaw9651]

your machine is filthy mate

[@Westvillin031]

this is still clean iv seen some shockers

[@eyespy1415]

You watch too many roland videos. If that's your idea of cleaning a head, sell your printer.

[@lalo19851]

Thanks for the comment. I'm not sure I understand it, tho. Do you think it's a bad method of cleaning?

[@eyespy1415]

@@lalo19851 All you are cleaning when you did that, is the clamp plate that hold the head together. You are just doing a cosmetic clean and would not have helped your lack of black.The no black was a lack of ink and the cleaning process you performed with the printer resolves the black issue. Did you also clean the wiper to prevent the build up that is on them from transferring to the outer part of the head.

[@lalo19851]

@@eyespy1415 Gotcha. I agree. I was also skeptical about how cleaning the clamp plate would work, but it just did. I did this video back in 2014. I've always it cleaned the same way. I purchased this machine in 2012. 9 Years later, still same head, not once has a tech had to come out for any printing issues. This method always clears out banding or weak colors...strange but it just works, man!

[@eyespy1415]

@@lalo19851 Yep good for you..Techs charge way too much for what they do. I have owned 300,540 and jv3 printers for 20 years and have never called a tech.Think about how the wiper scraps across the heads, your sponge swab is no where near as violent as that