BEST BASIC TORSO FOUNDATION YOU’LL EVER NEED! Watch here ⬇️ kzbin.info/www/bejne/omPQaGSJYr9sa7csi=CjfgqBVQe8dn958N
@jeanettedsouza5103 жыл бұрын
I have seen many basic slipper drafting video’s but this is one of the best! Thank you for sharing this
@LAMODÉLISTE2 жыл бұрын
❤❤❤❤❤
@MariaNazareth-g6l11 ай бұрын
Reply
@marceladelavega9864 Жыл бұрын
Hi Britt. How and where do you get the armhole width to compute for the armhole depth?
@prbasset63712 жыл бұрын
An excellent demonstration. I have four pattern drafting books including the two you mentioned. I realise I will have to do an FBA and also adjust for a high round back. But your video is most helpful. Thank you.
@lawrencejlittle Жыл бұрын
excuse me but I just noticed your comment…I wanted to ask that very same question. See I love this video because I think it’s very well done and easy to follow but I was wondering do I follow it to completion using my wife’s measurements (51 3/4 bust circumference) then do a FBA? I’m really trying to get this right for her so that I can begin making clothes with a more flattering look to her natural beauty and form vs her trying to squeeze into off the rack stuff.
@by_mahdi_ranani2 жыл бұрын
I love this pattern.I start using this technic and most of my customer like it very much.Thank u for sharing.
@LAMODÉLISTE2 жыл бұрын
❤❤❤❤❤❤❤
@mercedes1171 Жыл бұрын
Omg I followed this and it worked! It just took a few adjustments for fitting but I'm so happy I finally have my own bodice block!!! I tried some others and was just confused and didn't understand the fit issues, but this was straightforward and turned out good I can't wait to use it
@dyronmonilla84413 жыл бұрын
Lovee this video!!! 💖💓❤️ Next video suggestion the tutorial of skirt pattern of this bodice. Thank you!! More videos to come! More power to you! ☺️💕❤️
@LAMODÉLISTE3 жыл бұрын
Hi! Thank you so much I’m glad you enjoyed this tutorial! I have a separate tutorial for the skirt pattern drafting 😊 Here you go kzbin.info/www/bejne/Z3-ynJZ5q9yKp6s
@LAMODÉLISTE3 жыл бұрын
kzbin.info/www/bejne/Z3-ynJZ5q9yKp6s
@junemagyar91708 ай бұрын
I love your tutorials it's so detailed step-by-step
@gladtidings4all2 жыл бұрын
Ordered the book. I’m going to give it a try! I like this drafting because you do both at the same time!
@LAMODÉLISTE Жыл бұрын
Hope you enjoy it!
@gladtidings4all2 жыл бұрын
I’m so happy that you’re measurements are in inches and not metric❤️✅
@LAMODÉLISTE2 жыл бұрын
❤❤❤❤❤❤
@ritaadler-everett53922 жыл бұрын
This was executed so well! Thank you for taking on the task.
@LAMODÉLISTE2 жыл бұрын
😉❤️❤️❤️❤️
@patcerulean30933 жыл бұрын
Nice thank you for sharing this! This version is much simpler. I downloaded the Helen Armstrong book and i love it aswell but more complex than this one.
@LAMODÉLISTE3 жыл бұрын
You’re welcome pat! I hope this will help you! Actually to be honest now that I did this bodice I might use for the next projects or switch it up with the Helen Pattern. Keep your Helen book it will also help you with your future projects. When I was doing shows in Manila most of my garment patterns came or derived from the Helen book. It’s really helpful! Thank you much for appreciating my tutorials! ❤️🥰
@gliyana43433 жыл бұрын
Thanks
@evelinastoyanova9097 Жыл бұрын
Hi, Pat, where did you downloaded Helen’s book?
@toomjerryjerry96473 жыл бұрын
I love the way you teach us ....and the honest reviews which you share about these books...love u
@MATHMARILU3 жыл бұрын
Thank you. I have the book but was very confused! With your explanations, I feel very confident.
@LAMODÉLISTE2 жыл бұрын
❤❤❤❤❤❤❤
@themarquis3363 жыл бұрын
This is a really nice video. You’re good. Congratulations.
@justinegailpizon89113 жыл бұрын
Love it! Wedding gowns please!! ❤️❤️
@LAMODÉLISTE3 жыл бұрын
For shiz will do!
@Lanaroblox02 жыл бұрын
Thank you for this pattern. I just realised mine and I will do a test soon. Does it include seam allowance ?
@TreasureShama Жыл бұрын
I really like your work, your teaching is clear. Thank you so much for thus tutorial.
@TreasureShama Жыл бұрын
Wow this is nice, i love this tutorial. Thank you so much for teaching us. God bless you
@LAMODÉLISTE Жыл бұрын
You’re welcome 🥹
@julietssemugabi91903 жыл бұрын
Very simplified. Thanks
@LAMODÉLISTE3 жыл бұрын
glad it was helpful! youre welcome bb
@ataraxiastemple2 жыл бұрын
hi Brit! i made this bodice and i love it! i’m a novice seamstress, so i do have qns- do i have to add ease to this when making a garment? i know that we added tolerance, so i just wanted to be sure
@famnd4602 жыл бұрын
Best bodice tutorial 👌🏾
@LAMODÉLISTE2 жыл бұрын
❤️❤️❤️❤️
@BlackTopShopping2 жыл бұрын
Thank you. I was serching for a video like this forever .
@XxmisskjxX3 ай бұрын
Hi, How do you know how the measurement of the darts? Are there any calculation for this. Also, which Meath is of drafting the bodice block do you prefer?
@vespaenjoyer2 жыл бұрын
thank you for this video brit!! if you're still looking at comments, i'm a little confused on the side seam dart step. i also have the book and i was wondering what does the removal of the front and back darts mean? i'm worried that the waist area will be too tight on my block
@pujadutta283 жыл бұрын
Lvd the way you explain n clear each n every step ... it's really helpful for me to understand better ... keep doing this gud work .. m new subscriber n new fan of yours.. God bless you 🙏🤗
@LAMODÉLISTE3 жыл бұрын
This is so sweet! Thank you ❤️
@breannadavis15813 жыл бұрын
thank you so much for this! i can't wait until i'm off this weekend to follow along
@LAMODÉLISTE3 жыл бұрын
this is for you Breanna! thank you so much for this suggestion and i am sorry if it took a long time to post this video tutorial. but anyways here it is and i do hope you'll like it! ❤️❤️❤️
@najhpor65283 жыл бұрын
Hi! Thank you for this video. It's very helpful. I have a question though. Is the 2" shoulder dart for a B cup? Wouldn't it be a bit big for an A cup?
@Rodoell9 ай бұрын
Wow wow thank you so much for your video it helps me a lot ❤
@MossyMozart Жыл бұрын
I like that I can SEE the pencil lines. In other pattern-making videos where the instructor uses pencil and not a marker, I cannot see them. Do you use a softer pencil than an H?
@minnieshao8108 Жыл бұрын
I love your tutorial its the best I have seen
@LAMODÉLISTE Жыл бұрын
❤️
@perpetuanneka6800 Жыл бұрын
Amazing!!! Very clear and understandable 🙏
@LAMODÉLISTE Жыл бұрын
❤️
@perpetuanneka6800 Жыл бұрын
@@LAMODÉLISTE how can I get your books ?
@maridiani3 жыл бұрын
Thank you soooooo much for the video.... Will try it today.❤️❤️❤️❤️❤️😘😘😘
@LAMODÉLISTE3 жыл бұрын
Most welcome 😊 tell me about! tag me on my Ig SEW IT WITH BRIT!
@star18472 жыл бұрын
Thank you for the amazing video tutorial
@LAMODÉLISTE2 жыл бұрын
❤️❤️❤️❤️❤️❤️
@houseofcarlson2472 жыл бұрын
I really love your teaching, am here with you. Thank you so much for sharing your knowledge. God bless you.
@LAMODÉLISTE2 жыл бұрын
Thank you sooo much for appreciating. God bless you too! ❤️
@imavahfitandstuff29212 жыл бұрын
Yesss I am thankful also.
@dyronmonilla84413 жыл бұрын
Miss Brit Why did you not use the armhole depth and armhole circumferece measurement in drafting?! For the arrmhole depth you actually use the half of width frame. Pls enlighten me heheh Im just confuse why 😅 heheh Im just a beginner starting to learn pattern making. Thank you for the video! Its very helpful.
@LAMODÉLISTE3 жыл бұрын
With the armhole depth, It’s what the book instructed. The armhole circumference is for adjusting or altering the pattern once you’ve already made the toile or Muslim. So if you observed that the armhole is quite big, you can always refer to the Armhole Circumference measurement. I hope this helps you! ❤️
@dyronmonilla84413 жыл бұрын
Ahh i see I get it now ☺️💕💕 I have another question Miss Brit is it okay if the bust point is higher than the armhole depth ? Because encounter it that the bust point is higher with the armhole depth line.
@LAMODÉLISTE3 жыл бұрын
It’s okay if the bust point is higher. If you noticed my Bust point it was also higher than the Armhole Depth line. This is okay.
Your video was very helpful! I finally got the perfect fit. Thank you
@LAMODÉLISTE2 жыл бұрын
❤❤❤❤❤❤
@marceladelavega85892 жыл бұрын
Hi Brit. In step2 drawing the armhole depth, where did you get the 18 3/8in width? Is it the armhole circumference, ➗ 2?
@D0RKA2 жыл бұрын
I am lost at this part as well.
@LAMODÉLISTE Жыл бұрын
20:25 Here is the time stamp, please pause the video for the formula. It’s on the subtitle
@carraicodonnell8156 Жыл бұрын
@@LAMODÉLISTE that is the end of the video what do you mean, i agree this part of the video is very unclear and i dont know why you called two separate measurements the armhole depth. very strange
@anikathony5017 Жыл бұрын
I'm trying to draft this. Once and for all can you help explain this formula? For example 18 5/8in I'm always confused with the / is it divide or point . Or what please explain in tape form. Sorry I really need to know this because it been in almost all your tutorial.
@tiffany97202 ай бұрын
Thanks for sharing.
@patternwithprabha4 ай бұрын
Mam , with your experience can you tell which pattern book is best among many pattern book you have tried so far ??
@LAMODÉLISTE4 ай бұрын
Hmmmmmmmmm Dennis chunman, Metric pattern making and Helen Joseph
@titao61 Жыл бұрын
Hello! Thank you for these informative videos! I have a question with the frame measurements. The width is computed using half the bust measurement plus half the ease measurement twice?
@titao61 Жыл бұрын
I'm not sure I understand the instructions in the book correctly.. did the author use half the bust measurement (without ease added) plus half the ease measurement? In your video, half the bust with ease measurement plus an added half of the ease was used for width of the frame. I'm having trouble with the waist dart width because the excess take up is very small if I followed the book. Help please. And thank you again.
@TreasureShama Жыл бұрын
Wow this is good, I like your tutorial. Thank s so much
@LAMODÉLISTE Жыл бұрын
You are welcome 😊
@user-ni4fg9jj3u3 жыл бұрын
I loved this tutorial!! Very helpful. One question: should I also at 1/2" SA to this pattern or is that already added? THanks!
@blinknumberone2167 Жыл бұрын
❤ u loads Please the bust circumference you used was 32 4/8 + 2 2/8 =34 6/8 then for the width of the frame you added extra 1 2/8 making it 18 5/8 in. Is it standard or option to use to extra tolerance?
@abiramisakthivel1111 Жыл бұрын
I have the same doubt too!
@blinknumberone2167 Жыл бұрын
You’re the best ❤
@LAMODÉLISTE Жыл бұрын
❤️❤️❤️
@getteislove073 жыл бұрын
Love this video! ♥️
@glitzyeyezz52523 жыл бұрын
Hi Brit, I love your tutorials. Can you please make a bodice block for people with large bust,say 48”?
@LAMODÉLISTE2 жыл бұрын
oh yes would love to
@kmpapa123 жыл бұрын
Awesome tutorial! What if the waist measurement is wider than the bust? My patterns overlap. Can you suggest a solution?
@LAMODÉLISTE2 жыл бұрын
trace is the key. when the patterns overlap make it sure to get another piece of paper and decide which side (front and back ) you want to trace.
@keiyamcmorris92713 жыл бұрын
Hi brit great tutorial....May I ask how do you determine how much tolerance to use on each measurements. Thank you!
@LAMODÉLISTE3 жыл бұрын
2:26
@dyronmonilla84413 жыл бұрын
Hello! 🤗 I watched both of your tutorial on Basic Bodice Pattern. I find the Dennic Lo system much easier than helen armstrong (maybe beause of the way of measurements heheh). But I am torn what book will I purchase 😐 they said the Helen book is so good also. I was just concern if I find the book hard to understand the instructions hehe. What advice can you give me? 😊😊
@LAMODÉLISTE3 жыл бұрын
For starters, I think the dennic chunman lo book is perfect. You’ll be overwhelmed with a lot of pattern making lessons with Helen Joseph Armstrong. Once you mastered a book move on to another one to avoid scattering of ideas. Master and master. Practice and more practice. Some of the best pattern makers trained for many years. Take your time.
@dyronmonilla84413 жыл бұрын
@@LAMODÉLISTE I will buy both of the book and I will take your advice. Thank you! 😊
@LAMODÉLISTE3 жыл бұрын
@@dyronmonilla8441 welcome
@BlackTopShopping2 жыл бұрын
Hi Bri . In this video I'm trying to wrap my head around this vid. Each step you say hold for the formula please explain.
@LAMODÉLISTE Жыл бұрын
There are subtitles for the formulas that’s why I want you viewers to pause the video to see how I got certain measurements
@christianyvancabalar63063 жыл бұрын
Any recommendation on What fabric should i use for making a oversized coat? What is the perfect fabric fkr that project? Thank yo
@LAMODÉLISTE3 жыл бұрын
wool would be perfect.
@christianyvancabalar63063 жыл бұрын
@@LAMODÉLISTE do you any online store recommendations here in philippines?
@LAMODÉLISTE3 жыл бұрын
@@christianyvancabalar6306 prime fabrics
@christianyvancabalar63063 жыл бұрын
@@LAMODÉLISTE is it on instagram? Or they have store in like shopee or lazada?
@LAMODÉLISTE3 жыл бұрын
@@christianyvancabalar6306 I think they have a shopee shop. You can message them through their insta they’re very active there Here ya go BB instagram.com/primefabricsph/?hl=en
@patternwithprabha4 ай бұрын
Mam , Is that 2 inch front shoulder dart width is standard ???
@felicitasdesiderio9077 Жыл бұрын
Where can i purchase that book? Thank you
@sa81353 жыл бұрын
Excellent video 😊
@dyronmonilla84413 жыл бұрын
I would like to ask you add tolerance 2x in the bust area (2 2/8 inch & 1 2/8 inch) ?! Before and during the drafting? Does it make the bodice bigger?! Or its just normal?! Thank you!
@LAMODÉLISTE3 жыл бұрын
It does make the Bodice bigger because of added tolerance, i suggest if you don’t have the book the formulas here are accurate. List all of the measurements required with added tolerance or you can just add the tolerance when you’re drafting the bodice.
@possiblebyaraa_d93342 жыл бұрын
It's very clear.. thanks 😊
@LAMODÉLISTE2 жыл бұрын
😇 you’re welcome and thank you
@atsidesigns5454 Жыл бұрын
Hi Brit, my bust point and bust span are above my armhole depth... Where did I go wrong? Lol
@mamtaoza6549 Жыл бұрын
I need this book
@elizabethfrancois23443 жыл бұрын
Watch Nah BEST BEST BEST EVER I need to get that book
@LAMODÉLISTE3 жыл бұрын
Ooooooh thank you so much! ❤️❤️❤️
@elizabethfrancois23443 жыл бұрын
I just ordered it
@gemamendez1067 Жыл бұрын
Gracias por regalarnos su conocimiento Dios la bendiga Donde puedo comprar el libro
@ruattluanga70385 ай бұрын
Guys the Armhole depth is 1/2 width of Front or Back bodice + 1 cm
@catherinaantat4475 Жыл бұрын
Hi dear would it be possible to make shirt drafting tutorial for teenager. There's a lot of adult shirt pattern drafting and when i try to use the adult one there's alot of adjustment that comes with it. If it's not possible please let me know. Because i am still doing alot of research.
@MariaNazareth-g6l11 ай бұрын
Good explanation God bless 🙌 🙏 you and your family . How to measure 1 6/8"on measuring tape while drafting on bodice of Front and Back Bodice please 🙏 explain
@LAMODÉLISTE11 ай бұрын
1 6/8 inches is 1.75 in decimals
@level24563 жыл бұрын
Beautiful! Is the 2/8 " extended on front center line standard?
@LAMODÉLISTE3 жыл бұрын
hi there, yes!
@nunungrohmat Жыл бұрын
INDONESIA HADIIRRRR....
@gliyana43433 жыл бұрын
Very nice. Pl explained how to get arm hall depth thanks
@LAMODÉLISTE3 жыл бұрын
Hi there, thank you! Please pause the video to take a screenshot of the armhole depth instructions 😊
@anjumulchandani43663 жыл бұрын
Can you please show us the stitching of this pattern
@paramjeetkaur61707 ай бұрын
thank you 👍
@wasanthagamage73423 жыл бұрын
excellent job
@varshasm14183 жыл бұрын
When should we add seam allowance? Should we add it while cutting on fabric?
@LAMODÉLISTE2 жыл бұрын
add the seam or sewing allowances before you cu them on your actual fabrics. btw tolerance shouldn't be confused with seam and sewing allowance. a tolerance is for the movement, like an ease when the actual garment is worn. sewing or seam allowance are the ones you stitch on your sewing machine.
@YenTran-lj9bf3 ай бұрын
❤❤❤❤❤❤❤❤❤❤❤❤❤ thank you so much
@nonanormie54273 жыл бұрын
I will try your patterns
@LAMODÉLISTE2 жыл бұрын
thank you
@yaminig99483 жыл бұрын
Hi, this method is very informative and precise, can u show us the stitching video, which will support us.
@dabbys_fashion_house2 жыл бұрын
I like this 👍🏽
@Mehvish_Kasu.2 жыл бұрын
Thankyou so much. Can you please explain in detail about formulas ? Please.
@LAMODÉLISTE2 жыл бұрын
You’re welcome! I think I already have.
@mariastelianov49292 жыл бұрын
Excellent
@ronabenzie8618 Жыл бұрын
Cannot see the formula for the heading banner which obscures the writing at top of screen.
@carinsky74 Жыл бұрын
Tried this and made a pattern. Quesrion i get confused wirh 2/8’s of an inch, what is the conversion of that in inches or cm.
@LAMODÉLISTE Жыл бұрын
.25 inch or 0.6cm
@zuraidaaeschbacher40412 жыл бұрын
THANK. YOU DEAR
@LAMODÉLISTE2 жыл бұрын
💕
@stephaneroy26873 жыл бұрын
Well done my Love! Rest now. You deserve it.
@LAMODÉLISTE3 жыл бұрын
Thank you my love! I’m finally done! Up next..... little black dress! 💃🏻
@mayflorvolker93053 жыл бұрын
Wonderful ...👍👍👍👍👍💋💋💋💋💋😍😍😍😍
@LAMODÉLISTE3 жыл бұрын
yaaaaaaas queen!
@s.kumarvishwakarma4135 Жыл бұрын
Very good sis
@LAMODÉLISTE Жыл бұрын
Thanks a lot
@arethblaxaki8710 Жыл бұрын
TRYING TO SHAPE THE ARMHOLE LINE AND CURVES IT WENT OUT THAT MY ARMHOLE LINE GOES TO 32CM AND THE CURVES WENT TO 61CM TOTAL. CAN YOU PLS TELL ME IF THERE IS A POINT I DO NOT UNDERSTAND ?(DEPTH OF ARMHOLES)FOR EXAMPLE WHY WIDTH/2 PLUS 3/8? THANK YOU
@LAMODÉLISTE Жыл бұрын
Can you show me your pattern on insta thanks
@yaminig99483 жыл бұрын
Hi, how to stitch the single dart one in the front bodice.
@babytaurus12able3 жыл бұрын
Hi Brit! Lovely tutorial again! Can this be used for stretch fabrics but just don’t add tolerance? Or tolerance is still needed?
@LAMODÉLISTE3 жыл бұрын
Hi Ayoola! Usually I deduct 4/8inch on both back and front side seams. But I will have a separate tutorial for that soon!
@babytaurus12able3 жыл бұрын
@@LAMODÉLISTE Ok thank you
@babytaurus12able3 жыл бұрын
@@LAMODÉLISTE Hi I have another question... my bust point and bust span do not intersect whatsoever lol... so for the front waist dart do I still use the bust span as the width or just go down from my bust point?
@diannewong58643 жыл бұрын
In the armhole depth formula what width is this 18 5\8 in.confuse about this armhole depth formula
@wiphaphatflinton17802 жыл бұрын
Hi. I have a problem same as you a bout the armhole depth formula... Please share to me if you. Know how to work it out..
@sittain3 жыл бұрын
Can U draft it without the shoulders darts pls 🙏🏾🙏🏾🙏🏾
@wiphaphatflinton17802 жыл бұрын
Hi. Brit. Please could you explain about how to measurement around the armhole depth.
@LAMODÉLISTE Жыл бұрын
20:25
@roseviolet123 Жыл бұрын
if i dont want to add shoulder dart to sewing, how would i do?
@LAMODÉLISTE7 ай бұрын
Just simply measure out the shoulder slope measurement from the back shoulder neck point.
@sorahoshimi93582 жыл бұрын
How would one measure the armhole depth off of a person and not a dress form?
@possiblebyaraa_d93342 жыл бұрын
Yeah same question?
@LAMODÉLISTE Жыл бұрын
Actually I did another patternmaking technique based from Helen Joseph Armstrong, kindly check it out. I’ve inserted clip on how to get measurements. Thoooo, this technique doesn’t really use the taken measurements of the armhole. It has a formula, which I’ve shown at the beginning of the video while making the frame for the bodice
@dyronmonilla84412 жыл бұрын
Also try the Winifred Aldrich system 🙏💖💗💖 its also the book of some fashion student in europe
@LAMODÉLISTE2 жыл бұрын
I don’t like it lol
@dyronmonilla84412 жыл бұрын
@@LAMODÉLISTE whats your review about the system?
@LAMODÉLISTE2 жыл бұрын
@@dyronmonilla8441 the neck dart is weird
@gliyana43433 жыл бұрын
Please explain how to measure arm hole depth from shoulder
@teresaperez174 Жыл бұрын
what if your front shoulder to waist is longer then your back shoulder to waist?
@LAMODÉLISTE7 ай бұрын
That’s impossible, front is always shorter than the back
@omatundeogunlowo24263 жыл бұрын
Wow Wow Wow.
@helenphan25985 ай бұрын
What is half the tolerance
@faithpapafio48803 жыл бұрын
thank you so much for this video! i have one question: how do you add tolerance?
@LAMODÉLISTE3 жыл бұрын
Here you go here is the time stamp 03:02 STEP 1 (FRAME)