Land Rover Discovery 3, TDV6, 2005: Rear Brake Discs and Pads Replacement

[@giampierogaz7552]

Hi, I really appreciated your video, I was wondering if the procedure for putting the EPB into services mode is the same for the Discovery 4, that it doesn't have the key but the ignition button? Thnaks

[@OffMyCloud]

I'm sorry, I do not know the answer to that. I would suggest that you join the excellent Disco3 forum, where there is a section for Disco 4 owners. I'm sure someone there will know the answer and will help. Here's the link: www.disco3.co.uk/forum

[@giampierogaz7552]

Regarding my car Disco 4 SDV6 the EPB does not activate automatically but with the engine off the gearbox goes into parking mode and therefore this would prevent the rear disc adjustment

[@OffMyCloud]

As I do not know the differences between the Disco 3 and 4, I do not know what to suggest to you, other than to look on the forum I mentioned earlier. Also, if you search KZbin for Land Rover Discovery 4 rear discs and brake pads replacement, I see there are a few videos that might be helpful. Good luck.

[@coddwaa7057]

Should have slacked the adjuster off for the brake shoes through the disc before trying to hammer off next time. Just some advice

[@OffMyCloud]

I agree. For some reason, I'd thought that putting the car into Park Brake Service Mode at the start automatically pulled the brake shoes in, but I don't think it did. Then, of course, once I was into the job, with my head down cracking on, I didn't think to make life easier by using the adjuster, I just got to it with the hammer. All a learning experience as it's not a job I'd done before, so will know better next time.