Рет қаралды 701
A "how to" video on reconditioning the front and rear callipers on a landcruiser, or more specifically a 79 series landcruiser.
This is NOT a video on how to bleed brakes. I've covered off on that in prior videos.
No "special" tools are required but a little mechanical aptitude definitely is. This may not be text book but it got the job done and, for me, is/was more than adequate.
I was fortunate the internal borers (and the pistons) of the callipers were not in such a condition they were not recoverable.
One thing I did not mention, the front caliber kits the internal square section ring seals were pre-lubricated. I still ran a little rubber grease around the seals after installing them.
Another pointer, if you spill brake fluid it's best to wash it up reasonably quickly because if it remains on a painted surface for too long it'll strip the paint = not a good look. Washing with plenty of water will do the trick.
kennym
#79serieslandcruiser #landcruiser #brakeservice #brake #caliper #brakecaliper #kennym #kennymepicadventures