eero 6+ Setup Guide | FAQ's Answered | All Configs Shown

How to setup eero 6+ router is covered step-by-step. Show all the possible configuration of this mesh wifi system. eero 6+ FAQ's answered with demonstrations. Everything you need to know about eero mesh wifi systems. Using eero 6+ routers, eero Pro 6E router, arris cable modem as well as unmanaged switch.
Product Links
---------------------------------------
eero 6+: amzn.to/3iYL9ER
eero Pro 6E: amzn.to/3LEYvCJ
8 Port Gigabit Ethernet Switch: amzn.to/3WayU9O
16 Port Gigabit Ethernet Switch: amzn.to/3frkSi8
Cat7 Ethernet Cables: amzn.to/3Yf7pxD
Cable Modem: amzn.to/3dmUnrg
Recommended Product on my Amazon Store
---------------------------------------
www.amazon.com/shop/landpet
Video Links:
---------------------------------------
I highly recommend watching this video for understanding home networks: • Network 101 | Simplifi...
eero Pro 6E Review: • eero Pro 6E Unboxing a...
eero 6+ Review: • eero 6+ Unboxing and R...
eero Pro 6E vs eero 6+: • eero 6+ vs eero Pro 6E...
Timeline
---------------------------------------
00:00:00 - eero 6+ Setup Guide
00:00:48 - What is a Mesh WiFi?
00:02:19 - eero 6+ connection to modem
00:04:53 - eero 6+ Wired Backhaul
00:05:43 - eero 6+ Wireless Backhaul
00:06:32 - How to Expand Ethernet Ports on eero 6+
00:08:25 - How to Expand Ethernet Ports on eero 6+
00:10:42 - eero 6+ FAQs

[@landpet]

Product Links: eero 6+: amzn.to/3iYL9ER eero Pro 6E: amzn.to/3LEYvCJ 8 Port Gigabit Ethernet Switch: amzn.to/3WayU9O 16 Port Gigabit Ethernet Switch: amzn.to/3frkSi8 Cat7 Ethernet Cables: amzn.to/3Yf7pxD Cable Modem: amzn.to/3dmUnrg As an Amazon Associate I earn from qualifying purchases.

[@mwailes11]

Why can't the manufacturer create a video as concise yet as simple as this? Thank you so much for answering all the questions that I could not find answers for!

[@landpet]

No problem!

[@alextorres3885]

Right !

[@spanishreviews6040]

Can’t believe how good you are at explaining things. Thanks man.

[@landpet]

Happy to help! Glad it was useful!

[@tatedehaanmusic3076]

This video is amazing. There seems to be a surprisingly low amount of instruction on KZbin about using mesh with modem/router combos.

[@landpet]

Thanks! Yup not many out there

[@eezybreeezy715]

I don’t comment a lot but you literally covered everything I was questioning! About to get fiber installed in our neighborhood and I’m thankful I ran Ethernet throughout the house when I got it built so I can do a wired back haul !! Solid video man!

[@landpet]

I appreciate the feedback! Yup wired backhaul is typically the preferred route.

[@rbtt_377]

Fantastic post!!! Saw at least 20 YT videos, and NO ONE talks or more importantly demonstrates how to do a Wired Backhaul. Thank you!

[@landpet]

You're welcome! glad it was useful

[@tchall8153]

The King of Mesh does it again. Thanks for all the advice over the years.

[@landpet]

Lol, appreciate it! I feel like I’m becoming mesh man at this point.

[@AnonymousMiner2]

Soooooo helpful. I bought a ring pro alarm kit and got lost in eero with a medium/ large size house and poor WiFi on the opposite side from the alarm base station. I have a plan and feel comfortable executing. 500$ for the mesh WiFi hardware and cat6 I need was a hard pill to swallow without the information in this video. Thank you!!!!🙏

[@emmanuelepigmenio1332]

You're truly great in explaining how this works. I gain so much in your video. Now I'm ready to begin my network. Thanks a million

[@landpet]

You're very welcome!

[@taaaaaaaatony62]

Literally covered everything I had questions on. Thank you.

[@landpet]

No problem!

[@thehammer0369]

Oh my god! I have had this problem for about a year and have tried and tried to get them connected. I can't believe it was that simple. Thank you sir.

[@landpet]

Glad I could help!

[@martinez209]

On a gateway you setup the eero first then you go into the ip address and disable the 2.4 and 5 frequencies. Pro tip: setup the routers first then disable the wifi portions. If you're using your cell phone ypu have to tap the link that says advanced options when it prompts you to do so. You have to type the ip adress into your search engine. Also, the more you hardline the less of your wifi you're using. Also it takes about 24 hours for your eero mesh to learn your home.

[@everythingyousayiscorrect]

Finally the video I was looking for! Thank you, thank you, THANK YOU!

[@landpet]

You’re welcome

[@mairheart]

This clearly answered every question I had about setting up eero 6+ mesh with my existing network system. Thank you!

[@landpet]

You’re welcome

[@SparzWizard]

This was very informative and excellent work on visual demonstration. Magnificent!

[@landpet]

Appreciate the feedback!

[@et1965]

Exactly the video I was looking for and needed. Thank you !

[@landpet]

Glad it was helpful!

[@paulblack9931]

Thank you for making this video on using the eero mesh routers. This video is what I needed so I can get the best performance on my mesh system 👍

[@landpet]

Glad I could help!

[@holistichealer147]

You saved me a phone to call Frontier my internet provider which I was dreading. Thank you!!!

[@landpet]

No problem!

[@SuperXxelixx]

Men you just make it simple You go directly to the point 👉

[@landpet]

Thanks

[@jeromesomodio1178]

Exactly the video I needed to learn more of a mesh system i'm considering to purchase. Thank you!

[@landpet]

Glad it was helpful!

[@chasecreek53]

You are awesome at explaining it so none techie people get it. Thanks so much

[@landpet]

That’s my goal, just want to explain it so anyone can understand. Thanks for the feedback!

[@travr6]

This helped more than all the other videos i warded.

[@landpet]

glad it was useful, that's my goal.

[@jesseozog3288]

I didn't know about the bridging thing, this info really helped out thanks!

[@landpet]

Glad I could help!

[@SpeedN.A]

If i had a modem with more than 1 Ethernet port out, am i able to run multiple eeros as hubs for the same network off that and get full speeds? or would it just make more sense to use a switch?

[@Granny_Smith]

Can you plug the eeros into Ethernet ports on the wall to make a wired connection between the two?

[@za7601]

Wow great video. I did everything and my internet was not as good. From watching this video now I know what I did wrong. I didn’t disable the router in my Xfi modem/router combo. Will try that tonight. Thank you

[@landpet]

Thanks! That should do it.

[@Omar-ry5ii]

@@landpetcan you still connect devices straight to the modem?

[@vvnutzvv]

where was u when i got my fios bro! i simply had to guess all of ur suggestions while i figured it all out! especially when the dog ate my cat6 cord and still had internet! that really freaked me out lol! good vid and smashed like as suggested

[@landpet]

Lol

[@hectorrosa9259]

This helped me a lot! I have been doing modem to switch to eeros, it seems to work. I see at the end of your video to not do that. I will be switching to modem to eeros to switch. Hopefully I see an improvement! Thank you so much!

[@landpet]

No problem! If you have a managed switch, it should be ok but that's not good for an unmanaged switch unless your modem is a modem/router combo and that just so haNppens to be the main router and your eero is running in bridge mode which is something I don't recommend.

[@tramainemurray824]

Super informative video, thanks a lot. Learned a lot and was able to setup new network with no issues.

[@landpet]

Glad it helped!

[@randypq4671]

Just had a new ISP service installed and they came in coax to the far side of my house with an eero wire to the modem and an extender half way across the house. Can I extend the coax around my house and come in the house mid-way with the modem and eero and extend the second eero further into the house where the most usage will be. The area of the house they came in is the least used section of our home and the most used is the furthest side from where the modem was set up.

[@jfink1969]

Would it be best to direct connect to gaming computer with Ethernet cable and one extender not directly connected to main one or just have extender on desk and use WiFi

[@thomasyoung1753]

Great explanation explained it perfect to someone who haven’t got a clue what they doing 👌🏼

[@landpet]

Glad it was helpful!

[@fbcreativemedia]

Excellent presentation. You have answered every question i had on this. Thank you

[@landpet]

Glad to hear it

[@fbcreativemedia]

@@landpet Can i just buy a single router and get one later and join them together if i end up needing to

[@landpet]

@@fbcreativemedia yes

[@louiekwan2950]

Great video and thanks. I did purchased 2 last week and try to have both of them configured as wired backhaul. The issue is that after a few minutes, one of them connection is changed back from wired to wireless. What I want is to have one SSID and two eero 6 plus to have wired backhaul. Any idea or tips is much appreciated. How to get one SSID but two wired backhaul?

[@alenfishman9365]

Hell yea, you are the man. Thank you so much for this. Answered every question, gonna get one of these now.

[@landpet]

Glad I could help!

[@finestpix]

Totally deserve lots of subscribers.

[@landpet]

Appreciate it! Ill keep doing what I'm doing and hope for the best

[@treyb2919]

Answered all of my questions. Thank you

[@landpet]

Happy to help!

[@volticvirgo9855]

So we have a codex cord plugged into the router and eero wouldn’t connect unless I did wired connection but now we don’t have wireless wifi it’s all wired wifi

[@DanielRodriguez-mf6gj]

Very informative, thanks. What happens if i have a combo router/modem but do not shut off the router part when i connect to a mesh system? Will i be putting out both signals or will it not work?

[@landpet]

Yes you will be putting out both signals and things won’t be on the same network assuming the eero even recognizes it. You could also put the eero in bridge mode and just leave your modem router combo enabled

[@dwfinds3030]

I got one of these with us cellular, I'm canceling the service because of 600gb of data issue. I have cable modem now I tried to hook the eero to the modem but its not getting internet. Is it disabling the router issue on the cabel modem or because it was used with outdoor antenna set up before? Id like to be able to use it for wifi as they going to make me pay for it anyways.

[@stevengoulart1805]

I have an old access point located on my celling that I want to replace. I was wondering if can I use power over ethernet vs, the usc plug in power plug that it comes with? I was thinking of getting the eero 6 pro. Thanks!

[@landpet]

This eero doesn't support it, looks like something is in the works: www.amazon.com/eeroPoE6/dp/B09HJNCG81/ref=sr_1_3?crid=23HCDN6CVZJ6A&keywords=eero%2Bpoe%2B6&qid=1677303231&sprefix=eero%2Bpoe%2B6%2Caps%2C134&sr=8-3&th=1

[@bobpalmer4740]

ok at 11:28 you say i can go from the eero 6 that is connected to the modem and then to a network switch and then to another network switch and then to the second eero 6 and get the same back haul speed. it is not working for me. i have my family room connected to the local netgear switch and that switch connected to the main netgear switch and then to the main eero 6 router in the garage at the modem and the speed at the family room eero 6 is like 25 mbps. now and then it goes to 250 mbps on wifi connections. i switched the routers and i still get it. i ran a cst6 from the garage main router to the family room and still get the same 25 mbps on the family room eero 6 i'm lost. i'm now going to see if the linksys ea7500 router and see if it gets better and maybe toss the eero 6 units. thanks

[@aberdeen502]

Thanks for the clarification!

[@landpet]

No worries!

[@kyleswenson8152]

can a person utilize their current router and use the eero as a secondary mesh add on to boost that signal? I have a nighthawk x6

[@landpet]

If you run the eero in bridge mode. But its not something I personally recommend

[@shsstudent2013]

Does using a powerline adapter create a wired connection

[@saviourazzopardi9941]

So if I have a modem with multiple ports and I want to contact a pc wath is your touts. I should contact with the eero or contact with the modem . Thanks .

[@giannafoti1065]

Awesome video! However, I have a question. The wired backhaul is the best choice for each node, but how can you do a wired backhaul if the nodes need to be placed far apart to cover the house? It doesn't do much good if they are right next to each other.

[@landpet]

Thanks! Agreed with your statement, hence the point of wired backhaul is that it requires running ethernet cables which is not the easiest approach therefore I show the options with wired and wireless backhaul. In my case, I run wired backhaul and I got a few 100ft ethernet cables that are going through the walls to connect a few rooms to each other ensuring I have the best possible speeds.

[@tommyers714]

Enjoyed the video, very straightforward.

[@landpet]

Thanks

[@marcbengio8986]

This was super informative. Thank you. Question: I have 3 Eero 6 Pro. 1 is the main one and on app I see it saying "Wired", the others have the wireless sign on, however, I have them both connected to an unmanaged switch. When I go into "Advanced" of one that shows wireless, I do see port 1 Wired. Does this mean that I am "Wired backhaul"?

[@landpet]

If you’re connected via an Ethernet cable, then yes you are wired backhaul. Check the other one that shows wireless, do a speed test near it, if it’s as good as the other two then it’s just a bug in the eero app. I remember this being a bug in the original eero 6 (not this new 6+) but maybe it’s here as well.

[@justinshax4682]

On wireless backhaul, can both ports on the second be hooked up to devices simultaneously?

[@landpet]

Yes, you can use all the ports

[@krishaynes8130]

Thanks man, I have an eero pro6e and I just bought another one, but can’t find any mention of whether or not I can hook the new unit up via cat6 so I’m not hopping wirelessly between the two units. Pretty comfortable that’s gonna work fine from your video

[@JPudz]

Can you wireless backhaul with the first two eeros for coverage and run a wired ethernet cable from the second eero to a third into another building?

[@landpet]

Yes as long as it’s less than 100 meters away

[@user-gj6ib6cj5i]

Great video thanks for the explanation, but I have a question… In this day and age where everyone wants fast internet, I actually want to deliberately throttle back part of my network… Network A to have all bandwidth available Network B to be throttled. Here’s why. I want to share my internet with my neighbours (they can’t afford an internet connection and their kids mow my lawn and run errands etc for me) but I don’t want them eating all of the available bandwidth. I’m happy with how to connect devices via switches etc etc and plan to introduce a 10/100 switch that I have lying around into the mix. If I use a wired backhaul in Network B connecting an eero via a 10/100 switch, will the eero just use the Ethernet resulting in the throttle or will it try to use the faster wireless front haul IF the eeros can communicate with each other wirelessly - therefore giving my full bandwidth to network B and not the result I want.

[@Zlab29nd]

Excellent video. Thank you.

[@landpet]

You’re welcome!

[@acbeezik7354]

Hi, thanks for your explanations. This help me a lot. Y have just on more question. Can I connect 3 eeros directly to the integrated switch of the Internet modem router ?

[@PleaseTakeOne]

On my way to return my new router. Thank you!!!

[@landpet]

You're welcome!

[@GaelDeziGames]

Is there something to boost the signal from one wireless eero to another in a multi story building?

[@landpet]

That depends on the system you get, this is a dual band system so the wireless backhaul speeds are typically not as good as a triband or quadband system that has more bands to support faster speeds. With that said, for a dual band system, this thing is amazing. I've done comparison videos between mesh systems where I go into depth and show test results for speed in wired and wireless backhaul as well as range if you're interested. kzbin.info/www/bejne/qnqnqGShqJZokLs I have many videos on this type of subject.

[@hemispheresamusements7484]

So I have a question for you, My girl had these in her home. Long story short, she is now running a Verizon Cube for internet since the 5G speeds are faster than her old cable service. When we hook up to the network, we see the Verizon cube and the newly named EERO network, so when you discuss disabling the modem part of the router (in this case Verizion cube) is that even necessary since were hooking up to the new EERO network? I'm not even sure the modem of the cube even be disabled? I guess I am not clear why the routher part of the modem needs to be disabled if your not hooking up to that "old" network?

[@BradBClips]

Do you know if the POE 6 eero will play well with a 6+ If i connect the 6+ to the att fiber modem/router combo as the gateway and use the POE 6's as other nodes?

[@landpet]

I don't know much about the PoE eero but generally speaking, eero does say that all their mesh systems are compatible with each other. So in theory that should work however keep in mind, they still need power. If you want to be powered via PoE, then you need something like their gateway to send the power via ethernet. You probably also need to setup the eero to run in bridge mode if you want to keep your existing modem/router combo as the main router.

[@venkatesanramaswamy2878]

Nicely explained ! thanks

[@landpet]

No problem!

[@rlock8453]

I have FIOS and I am using a nighthawk router in place of the verizon router so do I connect the eero to the nighthawk router or do I have to get a modem now to use it?

[@landpet]

If the nighthawk is a modem router combo, you can connect it to the nighthawk and run the eero in bridge mode or you can disable the router portion of the nighthawk and run the eero as the main router. Either way you connect the eero to the nighthawk

[@rongierhart5686]

I have one modem/router from my telephone company (dsl). I'm not mesh technically savvy, can I just connect my eero 6+ to that modem without having to do a bridge mode (not understanding bridge).? Not sure how to do that anyhow.

[@landpet]

If you don't change the settings, you will have 2 different SSIDs and if you use the same name and password on the eero as you did on your main router/modem combo, that will cause wifi drops and other issues. The analogy would be is it's kind of like having two drivers in your car that are both trying to drive the car in different directions at the same time. Putting your modem/router combo in bridge mode is essentially disabling the router portion of the modem/router combo. So when you plugin the eero, it becomes the main router. If you don't want to change anything at all, you could just get a basic wifi extender. It's not going to be amazing or anything like that but what it does is takes your wifi signal and amplifies it, don't expect great things from it but in theory it should help.

[@caleb.smith32]

So I only have one eero. How would I get that to extend the wifi to the other end of my house? Does it need to be plugged into the modem at all times or can I unplug it and move it to a different room?

[@landpet]

The main eero needs to be plugged in to the modem. You need more than one to extend the signal, the secondary eeros don’t have to be connected via ethernet

[@kyleeckhoff7115]

Am I missing something, I have Gig internet service. I am using eero pro, which tops at 250mbs on WiFi, I average 200-250 mbs with it. I recently purchased the Asus XD5, with rated higher WiFi speeds. I average 350-400 mbs even with my Gig service. If I purchase the eero pro 6+, I assume my speeds will still be 350-400mbs?? Any help would be great

[@happyhour5690]

This is an excellent video as it explained so much! I do have one question though. I’m going to be putting in a contract to build a 2,500sf 2 story house in the next couple months and I’m paying to have a network enclosure installed as well as dedicated Ethernet ports in multiple rooms on all levels. He enclosure includes an 8 port switch. The thing is, the enclosure is in the basement with the modem in the enclosure and then going to the switch. My question is, am I able to go directly from the modem into the 8 port switch and then from there, I can go from the switch to the router or do I have to go from the modem directly to router before the switch? Reason is I’m concerned the router in the basement won’t cover the entire 1st floor above and would have to install an Eero ap on the 1st and second floor which means I would have to get a 3 box solution vs. two. Any help would be appreciated. Keep up the great vids

[@landpet]

Thanks! If it’s an unmanaged switch, the modem needs to go to the eero first then to the switch.

[@gunnerman1880]

What a great well explained of how to. Thank you 😊

[@landpet]

No problem

[@kylemc8851]

Great vid, thanks!

[@landpet]

No problem

[@alextorres3885]

Wow you explain pretty good, very understandable!

[@landpet]

Thanks!

[@tommyers714]

I have an ONT. I use an MoCa ethernet adapter to go from coaxial cable into the Eero Pro 6. This use the wireless connection between the other Eero device in my home. Is it possible to use multiple MoCa adapters and the coaxial cable that runs through my house to create a wired ethernet backhaul to create the fastest possible connection?

[@landpet]

I haven’t tried this but yes you can get a third MoCA to boost speeds

[@pedrorocks1313131]

Every question was answered in this video!!

[@landpet]

Awesome

[@veecee37]

Can I( use three wi-fi routers for a mesh instead if a router and two extenders?

[@landpet]

You can use three of these eero 6+, one would be the router and the other two would act as extenders

[@edgardomarenzi8458]

Great Video! 👍👍

[@landpet]

Thanks!

[@ryansmurda1552]

Can i connect the nodes with cables to the router or do i need to go through a switch?

[@landpet]

Either way works

[@bayodaman]

So If I also have an ethernet port upstairs I just connect the second one to that?

[@landpet]

Yes

[@loysheker]

what if I do not want to disrupt the home combo connection - modem + router. Can't I connect the 6+ to the old home router wirelessly?

[@landpet]

not wirelessly, you could connect it via ethernet and run the eero in bridge mode but I don't recommend that.

[@high3407]

Awesome thanks for video helped me out.

[@landpet]

Glad it helped

[@bobfossil]

Thank you so much for this video! Incredibly informative and easy to follow! I do have a question regarding speed and wireless backhaul. Say you currently have one eero and a device in another room that gets a download speed of around 250Mbps over WiFi, but it has a gigabit Ethernet port and your ISP give a you gigabit speeds, so it could be much better. If you get a second eero and wire it about 1-2m from the device in a wireless backhaul system, how much better are the downloads speeds likely to look? Would it be closer to gigabit or WiFi speeds?

[@landpet]

Thanks, not sure I understand the question, wire the second eero from which device? I think it’s best to watch my review video on the eero 6+ since I had around gigabit speeds when I did my tests. You can see all the numbers in wired and wireless backhaul.

[@RJNehlen73]

I installed 5 Ring flood light security system cameras at a church using the eero 6 router. It won't work as a stand alone router. It is directly plugged into an Arris modem. The satellites (2) as I call them are wirelessly connected. For whatever reason the eero works through the existing router from the cable/internet provider (Spectrum). They use one of the ports from the router for the phone line/fax machine. I bought a RJ-45 (Ethernet) to RJ-11 (phone) adapter to plug into the spare Ethernet port on the eero backside. I haven't hooked that up yet, however I believe that it should still work on the phone/fax machine. What's your thoughts?

[@landpet]

Sounds like you're trying to plug in the eero to a modem/router combo. That will not work unless you either place the router portion of the modem/router combo in bridge mode or disable it. Or if you run the eero in bridge mode. I would recommend calling Spectrum and replacing the modem/router combo with just a modem unless the router is a separate device. If spectrum provided router is a separate device, then you can just remove that and plug in the eero directly to the modem via ethernet. Connecting the other two eero's will just boost the speeds.

[@LISbear09]

If I only have one eero 6+ (received from Frontier) and I have a modem router combo, would I be better off using the eero 6+ as a wireless extender - especially since the other computer is at the other end of the house from the modem/router?

[@landpet]

You could put it in bridge mode but it works still need to be connected via Ethernet. I don't recommend that setup

[@brandongoken8033]

Question would there be any benefit to using a cat 6a cable for the router and its devices linking to it such as a ps5?

[@landpet]

cat 6a is capable of 10Gbps, this eero 6+ caps at gigabit so there would be no benefit assuming you have cat5E or above.

[@brandongoken8033]

@@landpet Thank you for this information much appreciated.

[@fazilshaikh8601]

Great videos. I am having trouble finding a multi gigabit unmanaged switch with 16 ports. Any recommendations? Ty

[@landpet]

Thanks! I'm currently using an 8 port, you could get 2 switches instead of 1, I haven't been looking for a 16 port specifically so not sure. best bet is to check amazon

[@johnmai5884]

Could I connect one eero to a switch then use the rest of the ports on the switch to connect a few extra eeros?

[@landpet]

yes

[@spuck1337]

This may be a dumb question. We just bought a new house and got fiber installed. Unknowingly to me I was thinking I would still be able to turn coax cables in the bedrooms into ethernet ports with a mocha system. Can I use the already ran coax cables or do I now need to get ethernet cables run through the wall? Fiber is running through our basement with the main spot for the modem through the ceiling on the living room. The issue is my home office / gaming rig is setup on the 3rd floor. my plan is for 1.2g I bought the eero 6+ 3 pk and am not quite getting the speeds I was hoping for in the office plugged ethernet into 2nd eero (300g-400g), I have the pro 6e on order and should be here in a day or so to see if it helps at all. Open to any suggestions! THANKS

[@landpet]

Short answer is, yes you can use MoCA. The only thing to keep in mind is your coax needs to be good quality and if there are splitters, they need to support the range that MoCA 2.5 operates. MoCA and Fiber have nothing to do with each other, they are not mutually exclusive. I go over MoCA setup with all the different ways of connecting it here: kzbin.info/www/bejne/gJfWk6CqfKuXatE

[@spuck1337]

@@landpet So to set this up with fiber with a eero 6se system Id plug the ethernet from main router into mocha box and then cable line in and then setup as normal with mocha? Would you recommend a powerline adapter over this option?

[@robbiee8825]

Thank you so much!

[@landpet]

You're welcome!

[@silverback1416]

great videos! I have Gateway eero Pro with 2 Beacons. I just bought 2 6+ based on your videos. should i remove my old Pro and connect the 6+ to the router and also remove all the Beacons? Basically, any layout suggestions for a 3 level townhouse? thank you

[@landpet]

Thanks! If you’re going wired, then you can just use the 6+ and replace the older stuff. If you’re going wireless, the 6+ is good but there are better options, outside of eero brand.

[@RegicideBrewing]

This was a great video! Could I use this same setup but hook up two different ISPs? I was thinking of hooking up an ATT modem and a Spectrum modem to an unmanaged switch and then connect a eero to the switch and put it into bridge mode. Would that work?

[@stephanelafond3378]

Great video! is it better to daisy chain 3 Eero through Ethernet cable(one to another) or to buy a switch and connect two Eero to the switch? Thanks!

[@landpet]

Thanks! There’s virtually no difference

[@TheDiTecher]

I have an important question to you please. When I use 3 Eeros in Bridge Mode - Can I go from Modem/Router into a Switch and from the Switch into the 3 Eeros? Or do I still have to follow the rule that Modem/Router has to go first into one Eero and from this one I can go to a Switch and then into the other 2 Eeros?

[@landpet]

You can do that however the eeros need to be wired to each other in that case. Make sure you set bridge mode in eero app Modem/router combo -> switch -> eero > another switch to 2 eeros Or Modem/router combo > switch > eero > eero > eero

[@NathanMckeever]

I don’t know I you can answer this question but I am trying to connect my Xbox to one of are eeros that is not connected to the motum and the Xbox says cannot connect to your dhcp server what does that mean and how do I fix it?

[@landpet]

You need some sort of internet access like a modem connected to your eero for the XBOX to pick it up.

[@anonnine]

Helpful guide

[@landpet]

Glad you think so!

[@nealdz1031]

Thanks. Brilliant vid

[@landpet]

Glad you enjoyed it

[@alexs.6972]

Hi there! Great presentation!!!! May be I missed something somewhere in your video, so Question. Can I connect my laptop with ethernet cable to one of this routers to make it as wired connection? I have Amplifi HD and it has an extra connections for computer/laptop being wired connected. BTW, I'm not a comp. tech of any kind. Thank you very much in advance!!! Alex

[@landpet]

Thanks! Yes you can connect your laptop via ethernet to one of the routers

[@jasonborba7760]

Great video but I have a question. I have a modem/router combo. Do I put it into bridge mode before or after setting up the eero? Thanks in advance.

[@landpet]

Thanks! before setting it up

[@JayJayzWorld]

Say you have a dual band wifi motem/router(1 piece of equipment) and you just want to extend the range of that with 1 eero. Could you just connect 1 eero to that unit put it across the house and have both of them mesh together for you wifi?

[@landpet]

If that’s your goal, I would just get a regular extender. I wouldn’t get an eero for that.

[@Daniel-mq9xg]

hello, I have a question. I recently got eero 6, and when I connect the ethernet cable to my DVR cameras it wont connect to internet, even if I disconnect or disable the 5g network. I have try everything but it just simply wont received any data. Is there anything you would recommend. I even called my provider but it was not of any help.

[@landpet]

I’m assuming your DVR is connected via Ethernet to the eero which has internet access. If so, check your dvr settings to set it to use Ethernet. Also verify that Ethernet cable works by using it with something else like a laptop with an Ethernet port to make sure there’s nothing wrong with the cable.

[@Balitorn]

Thanks for the awesome video! I am currently using the Google Nest Wifi (nodes with speakers). I am considering upgrading to eero 6 but I am conflicted on which one to get. Pro 6, 6+ or 6E. We have a pretty smart home that is 2200sq ft. I also have gigabit internet from spectrum in southern California. I don't think anything in my house utilizes 6e. I would be using a wired backhaul since all the house is wired for ethernet. Any advice on which one to get? I am currently getting some dead spots in my garage and backyard. I am using a Nest Router and 3 nodes. 2 nodes downstairs and then router and 1 node upstairs. Thanks very much in advance!

[@landpet]

No problem. For wired backhaul I would go with the 6+ and get some extra nodes as necessary.

[@pilsplease7561]

Gigabit is nearly only in like LA and Bay area outside of that nobody is even getting 50 megabyte downloads on the high end.

[@flodaddy21]

Very well done. 👍

[@landpet]

Thank you! 👍

[@robertjuarez6346]

Do you recommend to use the eero router w the spectrums modem? I don’t want to be paying that $7 monthly fee! In the Uk we don’t have to worry about modem/routers in the UK as they provide the required equipment for you to connect to internet via Ethernet or WiFi

[@landpet]

Good idea, I’m also not a fan of paying a monthly fee for routers

[@jslade7959]

Awesome Video!

[@landpet]

Thanks!

[@17patriot76]

My fiber optic ISP provided (1) eero 6+. I gather to extend my coverage it would be best to buy another eero 6+ and plug it into another room? I see Amazon has eero 6+ mesh Wi-Fi router $110 (ouch), eero 6 dual-band mesh Wi-Fi 6 extender $70 and eero mesh WiFi router $45. I assume the cheaper options would give me poorer performance. What do you think?❓

[@landpet]

I typically prefer getting the same model number, so I would opt for the eero 6+. Now there are better mesh systems out there but for the price the eero 6+ is actually pretty amazing.