#Landshark

[@seanherbert9623]

Great information, car looks good. What kind, size, offset wheels and tires are you using?

[@seanherbert9623]

The wheels did fit, they had a chamfer that cleared with no problems. How did you handle lug nuts? Did you find spline type 1/2" LH lug nuts. I have not had any luck finding anything that will work. Appreciate any help I can get.

[@HsPerformanceWi]

Yes, I had a bit of trouble finding splined lug nuts that would work. I think I ended up finding them on Amazon

[@sanelcatic6276]

That and how much would you charge to make me the cover u fabricated for the hole between thr grill and radiator also would the disc break conversion help for the tie rods or the steering links that were rubbing the drum

[@gava7691]

How thick was the master spacer?

[@HsPerformanceWi]

.280 in. but i think the pushrod was out of the s10 as well so may change things

[@jerrydc818]

Since you’ve modernized the powertrain, why not the brakes. There are companies selling alum Buick fins over disc. They’re pricey ($1600) or machine it yourself. I do agree they are sexy. Thanks for posting and good luck.

[@HsPerformanceWi]

Only for the simple fact that I love the look, and these cars had excellent braking from the factory. There have been a great number of folks that have actually lost braking ability by switching to discs as told on the AACA forums. However, if the drums don't cut it I am not opposed to upgrading. Thanks for the comment!

[@seanherbert9623]

I found the info on your wheels, in an earlier post. I have a 63 Riviera and would like to get the same ones. Who did you get them from? What I find online the wheel center bore is not big enough. The car requires 3.43” and the ones I found are only 3.08” (Summit Racing). Did you machine them or use a wheel spacer? I am hoping you found a supplier with a bigger selection. Thx! BTW awesome sheet metal work!!!

[@HsPerformanceWi]

mine fit with no issues, I purchased them direct from Holley as they were the only ones with inventory at the time.

[@jeffreymiers8793]

I dont remember if you showed it on a previous episode, but what are you running for a fuel pump? Im going tbi on the 401 and need to stick a pump in the tank. The Riv is looking great!

[@HsPerformanceWi]

Thanks Jeff, part 5 I go into detail on the whole system. You are also mentioned lol