Warn Winch Install | Yamaha Grizzly 700 | Tips+Tricks | Correct mount plate!

[@marcosrubino7003]

The tip on the mounting plate saved me a lot of heartbreak (and heartburn, for that matter!). Ordered the KFI per your recommendation, it fit like a glove to the machine and the winch, except the holes for the control box (I installed a Badland winch, not a Warn, the Badland control box doesn't have exposed electric contacts) didn't quite match. 10 minutes with a round file took care of it. Thanks!!

[@ThomperBeThompin]

Awesome, man! I'm glad it could help

[@BK-qo5fn]

Thanks for doing these how-to's. I bought a 2022 Yamaha Kodiak 450 eps and am in the process of mounting up a Warn 3500-S (found a really good deal on the 3500 and it turned out to be cheaper than buying the 2500). I followed your old videos from when you had your 450, and it was a huge help. I decided to mount my contactor under the seat, so I had to make up 2 new wires (yellow and blue) to go from the contactor under the seat to the winch. This my first ATV, now I just need the trails to open and the snow to melt so I can get out and start enjoying my new toy.

[@ThomperBeThompin]

Heck yeah. 450s are beasts. I can't wait for the summer riding season either.

[@spyder000069]

Between the battery and the steering column I found a white 4 pin connector that is not being used. What is that for? I just want to make sure its not for diagnostics or something important and if so I want to make sure my contactor mount doesn't interfere with its use.

[@ThomperBeThompin]

I'm not sure. You can probably find a parts schematic online that might be able to tell you what that's for

[@jfre1975]

Hey brother. I just got a 2023 grizzly 700 and im about to install a warn winch that i got not from the dealer. But. I need that wire conector that you show on the video. What is the part number of that harness and where can i get it from? Thanks.

[@ThomperBeThompin]

Congrats! The part number is listed in the description and I'm pretty sure I got mine from partzilla.

[@diglips2091]

Just installed the same on my 2019. Thanks for the heads-up on the KFI mounting plate and doing plate, then winch installation.

[@ThomperBeThompin]

Right on, glad it could help

[@justinnewton7168]

Do you know if that's the same part for the 24' grizzly wire lead

[@ThomperBeThompin]

@@justinnewton7168 I'm almost certain it should be. No changes to the quad between model years (aside from color)

[@felixponceti880]

How did you connect the red wire from the switch to the wire lead ? , thanks for the video

[@ThomperBeThompin]

It's a simple bullet-style connection. Just feed it in, crimp it down. I usually put some heat shrink wrap on the wire first, so you can seal it up after connecting. Then, as another layer of precaution, I usually wrap it in electrical tape.

[@prestonsplayhouse1660]

What is the product name for that wire lead for the DC outlet? You reference it as a Yamaha product. I’m going to be looking into that when I get my winch. Do you have a source on where to purchase?

[@ThomperBeThompin]

Its in the description. Got it from partzilla

[@OV3rT1Me206]

Great video, I just wanted to get clarification, I'm going to install the same winch but with the steel rope....so, was there only an issue with the warn mount when used w/synthetic rope? Or can I use the KFI mount w/steel rope too? 2021 Grizzly 700 EPS

[@ThomperBeThompin]

If you purchased Warn's mounting plate for steel rope then you should be perfectly fine as it has a slightly different front end on it. I specifically chose the combo kit for the synthetic rope version which included the winch and mounting plate for a hawse fairlead. Essentially warn as two different mount plates to accept the two different styles of fairleads, rollers for steel rope versus hawse for synthetic line. So I think you're good. I hope that answers your question

[@patricksmith699]

Just bought the same exact quad. How did you match the paint colors for the skid plates and what did you use for paint? I think it looks sweet.

[@ThomperBeThompin]

Congrats on your new quad. I just use some simple rattle can spray paint I got from a local craft store. There are a couple brands that sell something really close in color. I recommend a glossy finish because it's easier to wash off

[@trailblogger]

Great video! 👍 Thanks for the tips

[@joekearney]

It’s been several years since I done a winch . Matter of fact it was my 2012 Brute Force 750. I’m not sure I have the patience anymore lol. I mounted the contactor under the seat on it . Can’t remember about what we did for the power to the switch . Seems I remember whatever winch I had bought at the time had plenty of long wiring to go from under the seat to the contactor however . Good work on yours , as long as it works , nothing else matters .

[@TheVdacchille]

Hi thanks for the video very helpful. I'm about to place an order for the exact setup you have. Is there any way the Warn winch plate can be made to fit? I have a completely stock 2022 Yamaha Grizzly 700 SE. Thanks

[@ThomperBeThompin]

Yeah, you can make it fit. If you look in the video you'll see some white lines on the winch plate where I was going to cut the metal and notch those areas out. I feel fully confident you could do that and it will be just as strong as it needs to be.

[@TheVdacchille]

@@ThomperBeThompin thanks

[@EnmanuelTorres24]

Hey bro!!! I’m found a Kodiak 450 and went I call the sale guy toll me they where missing the rear shock because they were lost in shipment, went I went to see it the plastics where damage and only one shock was missing. I put a deposit on it, and the manager said that he was goin to repair everything and make seem like nothing happened to it. Should I wait for that one or should I tell him to order me another one. I need some advice

[@ThomperBeThompin]

Shoot, that's a bummer. How does a single rear shock get "lost in shipment"?!?. I would take an extremely close look at the frame and ALL suspension components. If the plastics were damaged, it must have taken a good hit in shipping. I personally would order a different one. That said, maybe you could get this one with a FREE extended warranty, or a big discount on the purchase price. If you go that route, while looking the machine over, look for any detached wires, missing hardware, and any bent frame components. Even if the painted finish on the frame is "crinkled" I would not touch it. So, it all depends on what you're comfortable with.

[@EnmanuelTorres24]

@@ThomperBeThompin they gave a quote of $8200, and thats the best price in the State, Im in TX. so I'll think about it! thanks for your response.

[@redzmvt]

These machines are shipped without the shocks installed,so I guess someone forgot to include the 4th in the set-up kit.

[@EnmanuelTorres24]

@@redzmvt yeah but went I go to see it, the plastics were damage and also the salesman toll me both rear shocks where missing but Only one was missing, so I have to let it go.

[@mmyers103111]

I noticed the wire harness has two leads coming off it. Did you need both?

[@ThomperBeThompin]

No you don't, only one of them. But then you'll have an extra for any other accessories like heated grips or a light.

[@mmyers103111]

@@ThomperBeThompin awesome! Thanks

[@osamahanged]

hey thanks for the video. can you tell me the part number for that wire lead?

[@ThomperBeThompin]

Yeah, I'll update it now and post the part number in the description.

[@osamahanged]

@@ThomperBeThompin thank you! Just ordered that wire lead.

[@romanprice9267]

Where’s those skid plates from to match the plastics ?

[@ThomperBeThompin]

These are aluminum skid plates from Ricochet off road. All I did was rattle can spray paint them

[@romanprice9267]

@@ThomperBeThompin thanks pal they look grate 👍

[@ajlopezp22]

Can you please tell me which skid plates you used.?

[@ThomperBeThompin]

These are from Ricochet Off Road

[@factionfx]

KFI 101275 is the mount plate for 16-23 grizzly 700 and kodiak 700

[@patrickburt2032]

What’s the part number for the key on adapter ?

[@patrickburt2032]

Never mind 😂

[@TheWhiteOakHomestead]

Great video! This helps out a lot

[@Project2505]

I mean all the wire connections I use I put it on a bunch of dielectric grease water is not an issue

[@brookepassmore9541]

KFI plate Works on the 2024

[@cwinsor3085]

Great Video. Thanks

[@alfonsocarnucci3982]

Not sure why I haven't told my little brother about your channel yet

[@cwinsor3085]

Can you please tell me which Hand Guards and Mounts you used. The ones I ordered from MotoSport don’t fit correctly.

[@ThomperBeThompin]

Sure, these are the ones from Kolpin. They come with mounts and I got them from Amazon. My tip: I had to tighten the bolt that connects the mount to the guard pretty hard to make sure they don't move around. But, have had these on three different ATVs and am happy with them. Just search "Kolpin handguards" on Amazon. They are about $50