DIY Coffee Mug Holder Wall Mounted Rack

[@dulceluzdeluna24]

I have watched your video at least 25 times . Thanks for creating this . It is the most appealing of all the dyi videos . Can I have the measurements, please ? I am really a beginner trying to display all her mugs .

[@LandtoHouse]

Thank you! I actually gave this to a lady in my town. I dont have access to get measurements.

[@OurTreasuredHome]

Hello, oh wow this is so cool. I need one of those. We collect mugs and cups so much that there is not enough room in the cabinets for them lol. Years ago I would have needed three of those wall holders lol. Thank you for sharing and have a wonderful day.

[@LandtoHouse]

Hello. That's funny. Apparently it's quite common for people to collect mugs. Somebody approached me at our church and asked if I would make them one. Definitely a good idea for displaying mugs or actively using them.

[@OurTreasuredHome]

@@LandtoHouse Yes it is common and my mom use to collect salt and pepper shakers and display them in the kitchen :) That is cool and so economical. Yeah I like just about any mug and my son and daughter in law collect batman, joker, Harley Quinn, star wars, and there is a PlayStation mug also, so we tend to have alot, but it is all good. 😃👍

[@LandtoHouse]

:) I had no idea there were so many mugs out there. I am a non coffee drinker.

[@OurTreasuredHome]

@@LandtoHouse yeah there are alot and I am a wonder woman fan so they get those and anything charlie brown lol, but I drink alot of tea also so the mugs come in very handy. 😊👍

[@xsageonex]

Bruh. This is great. I was looking into buying one for Xmas for my mother but I think I'll save me that good chunk of money and do it myself because those aren't cheap!! I'm thinking I'll probably stain mine a dark grey. Thanks for this.

[@LandtoHouse]

It took a good bit of time to build but turned out well. Diy can save a lot and you will know the quality.

[@xsageonex]

@@LandtoHouse Yeah for sure, I am a paint contractor so painting/staining comes natural for me. Dabble in some light carpentry but have never attempted to build something like this, I will give it a try. Thanks again.

[@jgutierrez2198]

Well done without a finish nail gun

[@IlluminatingNight]

Hey all, I believe the measurements would be as follows, knowing 1x4 is actually 3/4x3-3/4 - There are 9 spaces across, which are 6 in. each (54 in.) and 10 1x4s that are 3/4 in wide (7.5 in) - While cutting the longer inside pieces, he said they were 34.5 inches, which means the length of the outside short pieces would be 34.5 + two 1x4s that are 3/4 wide (1.5 in). Two outside longer pieces = 61.5 inches each Two outside shorter pieces = 36 inches each Eight longer inside pieces = 34.5 inches each Thirty-six inside short pieces = 6 inches each Let me know if you believe there is an error or if you try this. Unfortunately, the one I build will have two fewer rows.

[@cillyede]

Looks good!

[@LandtoHouse]

Thank you. Took some time to make but turned out well.

[@gordonwilloughby8793]

Harbor Freight has a brad nailer that will also drive staples. I use brad nails in place of finishing nails. I use it for staples too.The cost is between 15 and 25 dollars depending on the sale. I believe it is currently $15. I just finished a project with mine.

[@LandtoHouse]

Wow that is a great deal. I do need to look into one of those. Seems like a tool that I would use all the time.

[@MultiKlompen]

Great video

[@LandtoHouse]

Thank you! It turned out better than I thought it would.

[@PhilPattersonJr]

Gave me some ideas. Making a similar holder but for running medals and trophies.

[@LandtoHouse]

Nice. This one has held up well.

[@NimDod]

nice work!

[@LandtoHouse]

Thank you!

[@harrisonp3727]

Nice

[@LandtoHouse]

Thank you. It is working well!

[@dalinefissi9377]

good job !, can you make one with led light ?

[@LandtoHouse]

You probably could! I am not exactly sure how that would work. Would the lights go around the edge?

[@dalinefissi9377]

@@LandtoHouse make hole all along wood. cable led light passing around all the mugs

[@LandtoHouse]

Certainly possible. Or could just install some track lighting above it :)

[@WonderfullyNormal]

What kind of wood is being used and dimensions. 1” x 4” ? 8ft? Would appreciate

[@jsiesh]

It’s been 4 years…did you ever get your finish nail gun?

[@LandtoHouse]

Never did get one. Probably could have used one several times over.

[@mariareyna9986]

What’s the wood size ? I need to make this one !!!! Thank you

[@LandtoHouse]

I used 1x4s for this.

[@saccharine02]

Can you make one and sell it? I want one this big.

[@davidhelfrich7150]

So which mug is yours, I mean coffee cup.😉 And another one bites the dust, I mean project. 🦀

[@LandtoHouse]

This project took soooo long. Or at least it seemed too. My mug... haha. Now I can focus on better projects. I have a bunk bed conversion in the works that is really cool.

[@davidhelfrich7150]

I’m also waiting for the solar panel installation. 🦀

[@LandtoHouse]

Yes me too. I hope to get to that very soon.

[@Austin-it3sd]

You might have said it in the video, but what is the depth inside the cubbies?

[@LandtoHouse]

I used 1x4s so its actual size is 3.5" deep. (I think. It's been a day or two since I made this)

[@Austin-it3sd]

@@LandtoHouse Awesome! Thanks!

[@nintendolunchbox]

You could have hid the L brackets by flipping them upside down. They then would have been hidden behind the wood.

[@LandtoHouse]

We thought about that and decided that some nice trim would look nice on the edge so we left the brackets down.

[@xsageonex]

So....if 1x4s are about 3/4 in thick in actuality...then the length of the long outer horizontal pieces must be 61.5 inches??? And you have 6 inches in between each board, is my math correct? lol

[@martintierney1687]

Thanks for nothing Pal. My wife just saw this and now she wants one. What is the length you used for the horizontal frame pieces, you said your vertices are 3 ft., symmetrically the top and bottom SHOULD be 5 ft. Am I close????? Thanks, simple, inexpensive and efficient. (Get a nailer)

[@LandtoHouse]

Haha your welcome :) I go through the same thing with my wife. The horizontal sections are all little pieces. They were slightly different sizes because I did not get the vertical exactly equal.

[@martintierney1687]

Land to House Ok, I make those same “happy accidents.” I meant the frame top and bottom pieces, they look like 5 footers. Sorry. Thanks for your service by the way, big salute.

[@Ducksoapgirl]

@@LandtoHouse I am also curious what the outside dominsions are? 5ftx3ft?

[@xsageonex]

Should add up to 5.125 ft for the horizontal pieces.