Lanzar Opti4000D Amp Dyno

[@tatert.v.9908]

Thanks for doin this one I ve always wondered how well the opti drive would perform.. I appreciate u and keep em coming!!!

[@Brad772006]

I love Lanzar equipment. Back in the late 90s Lanzar brought one of their demo vehicles to a local shop. It was a Chevy Astro van. It was loaded down with 15s. It sounded so so good.

[@jeremybroderick9465]

the astro with 16 15s??

[@audioaddict2563]

Good job as always Ryan. Keep up the good work. Numbers were what I was expecting. The power draw was a little bit of a surprise. Holy ish.

[@wal]

Great vid brother. You need a nuclear reactor to power that joker though! I believe 40% efficiency at 1 ohm is worse than most Class A/B amps I've tested.

[@modbox9560]

Has 24x 400v ultra FETs

[@pattrickpls6564]

BigDWiz ...i buy usina angra 3 in Rio Janeiro...4.000w ...Very good man!!!

[@ryanmoore3278]

BigDWiz I remember your test on the Lanzar opti 50c.i was so disappointed to see its output...lanzar was one of the greats in out teenage years,we all wanted that 50c....without guys like you and Ryan and Steve we would never really know what these amps make....thanks guys

[@pvtghost24]

BigDWiz, the Orion 2500.1 did much better

[@frankromero9916]

Way to low for efficiency 👎👎👎👎

[@celestemccoy5476]

This is still a decent amplifier for the money. Honestly most people don't realize they don't need 4,000 watts to have a loud system. My two 15 CVR's are loud and shake everything in my car with 300 watts to each 15. Personally I would use this line of Lanzar if I had the money to buy it.Ryan you do a great job and I would call this a gem as well.

[@hoyt_arms]

These babys are on sale right now for 299$ cant beat it

[@dietrichwilliams2913]

over 1700 watts at 4 ohms! this amps a beast!!!

[@modbox9560]

Dietrich Williams not really Ryan did a certified bench of PD50001's I'm running two strapped @ 4 ohms 2 ohm a channel per amp draws nothing near that bad efficiency and my CT Sounds Meso 18s are beasts won't drop to lower ohm not needed.... Paid $220 for two PDs NEW

[@bigbob3409]

Mod Box how many db's u hitting? Your setup sounds pretty cool

[@modbox9560]

Bill Johnson Haven't metered it but going in for the kill decaf scares people to deaf when give demos meeting people on Craig's list The output section is upgradeable it has room for two more FETs and gates if added it stability goes up to .5 ohm instead of 1 ohm

[@bigbob3409]

Mod Box cool thanks

[@johnalenwork53]

AWESOME VIDEO AS ALWAYS BROTHER KEEP UM COMING!!! 👍

[@joshuacobb1810]

Brings back memories. I had a optidrive 2000.1d on four Kove Armageddon 15's at 0.5 ohm load in a S-10 blazer. Love seeing amps ran to see who's claims are what with regards to wattage claims!

[@catch22frubert]

A little disapointing with the certified numbers, but like you said, this is an older design. It will be very interesting to see how the 4001D does at half ohm. Great video this week. Looking forward to a lot of stuff you have coming up. Keep up the good work!

[@brewcitymike1]

defintiely wanna see that too

[@jmecillakennedy7102]

Great video..lanzar has always been super hungry for power since I used them back in the 90's.

[@cambokeogenuso7354]

Nice vid! I would love to see the comparison between the opti4000d vs the opti4001d. Keep the good and Thanks for all the amps dyno.

[@joeyholthusen6495]

Was surprised of the dynamic head room. 😎

[@breedam]

I love mine, had mine wired to .125 and it would still take it!

[@chaos7022]

So glad u did this I had a bunch of idiots acting like this amp was the holygrail and got all mad when I told them it won't do rated

[@quintonwilliams8586]

Friend of mine got 2 strapped in his yukon and that thing rocks. If he never told you what he had you would think he have 1000 plus buck amps. And he have them pushing 4 15inch skar subs. He running multiple alts and like 4 batteries tho.

[@errorserver3000]

Wow I was just looking for an amp dyno video of this amp yesterday with none available and today you release this. Nice!

[@errorserver3000]

Ryan Blankenship no kidding! Haha

[@kris-english]

I had my RE MT15 wired to .35ohm on mine and it worked flawlessly. Everyday. For the money, you can’t really go wrong. Soundstream use the same board for their older series and people win comps with them.

[@BucksSuperStereoWorld]

I enjoyed the Outkast like beat in the background at the end...

[@HifiVega]

I’ve been curious about this amp for a while. Thanks for the video! If you ever get your hands on the heritage 8 channel that would be pretty awesome too...

[@donnycannon6908]

I wish all of you dyno guys would test Rockville RXM8BTB8. Im very curious why its always sold out. And if it really does 65 watts per channel @4 ohms.

[@mikec4585]

Great review I like lanzar opit series

[@johnremsenjr.1999]

Awesome vid an content buddy as usual thanks I've been waiting for this one just ordered it a month ago with 20% coupon so now I'm actually happy I did keep up the great work thanks again!!##??💪💪👆👆✋✋👍👍👌👌

[@fresh55n9ne]

My cousin had this amp on a JL Audio 13 inch w7 he had 2 battery’s hooked up on it,man that speaker would pound,I always wanted that same exact setup at that time, but I could not afford it back in 2007

[@TAMIL-MUSIC]

how do you create 14v 500ams power to test

[@rhoppyrhop]

Dang the amp dyno beat is sick!!!!

[@johndough4338]

For those people that judge amps based off these numbers on Dyno machines, just know that these lanzar Opti amps are the shit. I have alot of amps that I experiment with, and I'll promise you that these lanzar Opti amps are wayyy better than expected. The Opti6000d play hard and long and stay cold at 1ohm. You'll have to really be abusing them to make them get hot. I pretty much played with most of the Opti drive series amps, and I recommend them over alot of other top name brand amps. Let me give you an example. You'll like the lanzar Opti2000d amp, wayyy over an JL audio 1000/1. I had both amps on the same subs, and the opti2000d impressed me with power, and the better ability to stay cooler longer. And the sound quality for music is just as good if not better than my JL audio 1000/1. Trust me. The JL 1000/1 is more comparable to the smaller lanzar opti1400d. Don't get me wrong, I'm no amateur, and I come correct with power & Wiring and capacitors and things of that nature. And if you're trying to get the most power & sound for the buck, Lanzar Opti class D amps are a great choice.

[@1ohmwrecker]

Every amp I run, I run double power and ground reducers. Always give ur amplifiers their best chance! At least sub amps.

[@alfa7108]

Back in the good olo 80s n 90z those were the beez beez. . great vit. Would still love to get oue

[@geraldeverette4245]

I would love to see a dyno on a lanzar vector 6000watt

[@NVMDSTEvil]

Used to have two of the Opti2000D's. They were nothing overly spectactular but they sounded good and made ok power and didnt flinch at some abuse. If I could get a 4000D cheap enough (Canada ...) i'd probably buy it just to have it.

[@gotti69gv]

That model amp is all over the place here in Puerto Rico.

[@Eury9819]

Hey man great video love to see you do a LANZAR OPTI2601D when ever you get a chance

[@Eury9819]

oh nice

[@VR_investments]

Cool video really enjoy the videos

[@mikewaters6339]

That is a nasty hungry amp.. WOW!! I expected more power but did well. Great video, keep it up sir.

[@moabs10blowthru41]

Loved my opti 2000.1d 1/2 ohm stable model from 04 I think

[@vVBlackRainVv]

What ever happened to the Opti 4001D amp dyno? I was really hoping to see the comparison!

[@bigblank69]

Still coming....

[@MadMax-jl2zt]

This is great but when are you going to test the lanzar 6000D. There's no testing on the dyno anywhere online for that amp. It would be nice to see what it does

[@MOBAudioUSA]

I have one of the 11000D of that line, really wish I could find a dyno video of that one too.

[@larrygraves3913]

I have 2 of them....I would like to see that as well. They are power hungry

[@evilmonstertruck]

First. I thought it would do that. Keep up the good work

[@joshhanson6777]

I'm ready to see the optidrive 4001d you mentioned! Its been awhile now. Bring it on. I'm dying to see it.

[@degreez357]

Did u see it?

[@craigceresi5306]

Wow awesome vid bro. That was a great amp for its time and can still hang with some of these newer amps of today.. Question tho is that a Chinese or Korean board?

[@terrencesmith9533]

Did you post a video of the 4000.1D

[@Djbz170]

Any idea on the numbers a opti 6000 would do? I've herd they are a newer design that's more efficient.

[@emerybryant]

i would have liked to see the 1 ohm cert with dual inputs to see if it makes much difference

[@emerybryant]

Ryan Blankenship oh ok! i guess itd help if i werent watching on mobile lol

[@trucavalier]

518 amps wholly giggawatt! When it didn't do 2000 at 4ohm i new as the impedance lowered I knew the watts were going to drop.

[@DOOKAT]

The soundstream version could take 16v I'm wondering if this one can too. I hear that it really comes alive at 16v.

[@GrulbGL]

40% efficiency.... this thing gonna catch on fire...

[@MR2Racer89]

Hey Ryan have you dyno the opti4001d yet? The half ohm ones. I Really would love to see what it does compared to the 1 ohm stable ones.. lemme know thanks. Keep up great work!

[@420dportkid]

Thanks for doing this one. I’ve always considered lanzar bad.

[@jonathanlantz6851]

It seemed like by the time each test was finished your power supply was very low and I think that the amp would have made rated power had it had the current it needed so that's why I think that you really can't say the amp didn't make rated power when your power supply couldn't keep up. You can clearly see the power supply was strugling

[@bigbob3409]

Good vid. Have you ever tested the 6000d ?

[@bigbob3409]

Ryan Blankenship well going by your test I'd imagine it would do the 6

[@joeyholthusen6495]

I didn't think it was going to get there on dynamic burst.

[@stevensmith1881]

Ryan, nice job as usual. Have you seen the new line from Precision Power called Trax? I'm thinking of getting the TRAX1.1200d for my son's car. It does look cheap because it has the old style screw down terminals on the amp for spade type connectors, but precisionpower.com claims 600 watts RMS x 1 at two ohms for around $80 new and $60 refurb. If it can make power, it might qualify for a budget gem. I know other Precision Power amps you've tested have performed well.

[@hertzsogood833]

Ok I got ya, Great video!

[@b1782w]

Hahah u did buy it nice thanks been wanting to see it

[@Supercharged1976]

Could you test like the Alphard Machete 1500.1 and/or the Soundqubed new S-Series 1250.1?

[@ilovetoyotatrucks]

ITL fit fine under a tundra crewmax front seat with room for size 13 gators!

[@degreez357]

Bro , do you hav a dyno of the lanzar opti 4001 ?

[@fightclub5807]

I have a Lanzar amp 6000 watts when I plug the subwoofer it moves at any speed without music what and the problem

[@hertzsogood833]

I had the same amp but it was stable at .5ohm, is this one not stable at .5? It was an insane amp at .5!

[@modbox9560]

This just gave me specs for Audiobahn A4KDN amp!

[@modbox9560]

Same motherboard 4 guage speaker the audiobahn looks more pretty tho with blue leds and digital volt meter...

[@nathanschmidt1129]

Do you know if this has similar guts as an audiobahn a4kdn?

[@chefd9002]

Can you please do a dyno on a Hiphonics Zeus zxx3200.1

[@bigbob3409]

U can get it for 300 now. Advanced auto sells it for over 900. Pays to shop. Thanks for vid

[@Timsmo0th]

What is the song you use for the testing portion??

[@mr.handyman6232]

Will this handle 0.5 ohms? I have four 2 ohm 15” svc

[@resaalynn8923]

Is This a good buy

[@dustinmoore1650]

Could you possibly do a Skar LP-1000.1Dv2 they go for $150 ish. Just wondering what they put out. Or any of the LP series.

[@dustinmoore1650]

Thanks

[@michaelwages8225]

Have you ever tested any sundown amps i.e. sae2000d

[@Beejay6765]

Where are the fuses for the amp

[@booggieman2u]

Lol I had one of these amps and 2 optidrive aluminum cone 12s and dang they would bang

[@johndough4338]

How did you like those aluminum cone lanzar Optidrive subs friend? Please give me your honest & detailed opinion on them. Thanks in advance.

[@booggieman2u]

@@johndough4338 loved them I had them for years and never had a problem with them hit very hard and took every watt I put through them

[@johndough4338]

@@booggieman2u ...I don't know how experienced in car audio subs you are, but based on your knowledge, what subwoofer level would you put them on? Would you say they are on the level with let's say a alpine type r, American bass xfl, or closer to a audiopipe bd2 or something like that? I know someone who has some of those aluminum cone subs unused, and I'm trying to know what level are they on

[@booggieman2u]

@@johndough4338 in my opinion they are some of the best subwoofers on the market honestly you can't go wrong with them the 2 I had could be heard from blocks away

[@felix18ify]

Can you do a dyno on the lanzar opti2000d? They claim to be half ohm stable

[@Simpleman1078]

where do you get them reducers at?

[@ancientalien815]

How did the 4001 turn out?

[@donaldmayland5165]

Is the 6000d any good

[@vladyamon1498]

Can u put on dyno ground zero? Ground zero gzha mini one or mini two? Super small hydrogen series amps. I have them...they look and sound very good and i am curious about the power ratings :) thanks mate :)

[@vladyamon1498]

And they can be a budget gem i think :) ;)

[@vladyamon1498]

Ryan Blankenship too bad :/

[@thebassgeneratorinc229]

it is an older design and all of the OPTzi's draw mucho current. ut they do a great job

[@rockandroll6]

The Orion XTR 2500.1Dz is a way better buy than this amp

[@adriant815]

A review on the Orion he mentioned??

[@catch22frubert]

Adrian Turrubiates It's coming soon. Not sure exactly when, but it's on the shortlist. I also own the Orion Xtr 2500.1dz, and it's a monster of an amp. Don't hesitate to buy if you are looking for a 2500- 3000 watt amplifier.

[@DibeezyTheGifted]

Adrian Turrubiates bigDWiz did one... Top 3 budget amp hands down... They raised the price to $400 tho

[@godzilla7391]

TheShaney1 exactly

[@resaalynn8923]

OK think im going with the xtr 2500.1 on the two skar evl 12s in the ported box tuned 34hz set up yall give me some feedback and let me no and by the way it's going in the old school grand marquis let me no wat yall think

[@tylerdcruz1999]

What about this amp Lanzar VIBE452N Vibe 6000 Watts 4 Channel Mosfet Car Speakers Sub Amplifier

[@joshknowles6987]

Are you gonna test the 4001d????

[@joshknowles6987]

Ryan Blankenship I cant wait to see the results. I love mine but they take a ton of power at half ohm. Each of my 4 were drawing over 400 amps each..

[@dronky700h6]

please when you will test Power Acoustik D1-6000D

[@dronky700h6]

not that amplifier if they sell it on eBay and amazon because they do not try it according to any number of more than what they say in RMS

[@joshknowles6987]

Can you do a dyno of the opti4001d I can't find one nowhere

[@joshknowles6987]

Ryan Blankenship awesome I just subscribed to your page so I'll see it when you do.. I'm running 4 of them 5 extra batteries and a 320a alternator now I burned the other one up. We tested them I wanna say they were ppl pulling 4-450a each... but that was with a dmm clamp meter.. I have them strapped at half ohm each daily... they are built like a rock my voltage dropped to 9v at the last show when alternator went out and they never got hot... so in my book they are great budget amps

[@1-Six-dee]

With the two ohm score I thought for sure it was going to do a little better but two ohms not to bad but unfortunately it didn't make the cut

[@TheSynged]

did 4000 at 1 ohm.

[@cocosloan3748]

40% efficiency? What crappy amp does that?? Almost 600A current draw? Useless!

[@housepumpinpc3983]

Lanzar... I'll pass. I had 3 of their amps. NONE made rated power.

[@mem10fan2]

Very inefficient! For the price there are far better amps.

[@chupamishuevos303]

lol

[@0xxLisaa]

You don’t go off the amps it pulls unless u ride around burping all days musical amp pull is a whole different number

[@modbox9560]

lisa townsend my buddy had two a4kdn's strapped 1 ohm Yukon with 8 runs 0 gauge three 350 mech man alternator these still dimmed truck on two 18" tc sounds 5hp motors

[@jhanohelem9788]

How much and wer the location pls wait me your repply thank you

[@anonymousvic5370]

I got this amp on a 150amp fuse, one extra battery havent blown a fuse yet

[@uptobatentertainment]

Do you buy all of these amps or do the subscribers send them in to you for testing?

[@uptobatentertainment]

Ryan Blankenship Nice! Thanks for doing these amp test vids!!! I have a twisted sounds 1.3k w/ dyno sheet & an Incriminator Audio IA6.4 .. The IA didn’t come with a birth sheet 😒 The TS 1.3k is rated 1550 @ 1 ohm but I want to know the efficiency, What tools do I need? Just the the multi- meter, clamp, & sine wave? Im thinking about going to a Twisted Sounds 2.8/ 3.5k or Incriminator 20.1& running subs at 2 or 4 ohm instead of 1 or .5 ohms. I’m thinkin higher ohms would be easier on the electrical system, amperage draw, amp, & subs, & maybe improve SQ, Any thoughts you have on this? Do you know if twisted sounds is still in business? Most of their amps are out of stock at a few places, including their own website & they don’t answer or return my calls lol.

[@uptobatentertainment]

Ryan Blankenship awesome thank you so much for taking the time to write the detailed answer! I went ahead and screenshot your reply so I have the info available! Have you installed the Wolfram 4500 yet?

[@DeeWadeSoundz]

Hmmm i must say it made tha cut tho ... I would like to see tha opti7000 or the opti11000 on a dyno.. now thats what i like to see tested . But great job my man

[@evilmonstertruck]

What do you think the difference between this and the 4001d?

[@evilmonstertruck]

Ryan Blankenship Ha. Nice. Thanks Ryan

[@dawn9340]

Probably not much.

[@bonzainews]

Rj45* 👍 great video

[@ruffnrede2]

I wonder how well it would do using music track's

[@zia2233]

Can you test lanzar vibe 292 5000w 2channel?

[@xalint1]

Link not working correctly for ebay it takes you to ebay but not to the seller.

[@xalint1]

Hey if I shoot you there would be no more videos we can't have that.

[@brewcitymike1]

you think thats a pain to lift, I have the opti 11k which is 37" and 57lbs

[@joaquinaguilar1602]

mike kotecki_brew city bass same here I just haven't installed mine, saving up on batteries. Going to run my opti1537's at 2 ohms. In a blow through. In a 2010 Silverado 1500

[@willridesbikes]

I have the 11000 as well. Shits a beast

[@evilmonstertruck]

At least the two channel is nice

[@michaeldeltadrop782]

If you haven't gotten rid of this amp you should recap the video and see what it does on the 2 1/0 adapters to see if it needed more power. One may never know....

[@misunderstood3727]

IS THE LANZAR OPTIDRIVE 7000D A GOOD AMPLIFIER?????

[@alfa7108]

good vid 👍

[@lowlowsgaming]

I need help finding a 1500 watt rms 2 Ohm mono Amp that is super efficient because my car and the aftermarket don't get along so someone help please

[@timellis3336]

Can anyone tell me how many real watts my 2 channel 6000 watt lanzar pushing?