Laptop OBD2 scanner DELPHI DS150 Review | Functions Overview

[@iamcarhacker]

➡OBD2 Buyers guide PDF: academy.iamcarhacker.com/buyers-guide-pdf

[@reyaadahmed1287]

Hi do you perhaps know where I can get the autocom software I have the device but I don't have the software can you please help me

[@craigescapeddetroit5198]

I bought 2 of these from AliExpress. I live in the USA. They arrived OK. It was challenging to get the software installed on my Laptop, but I eventually figured it out (it took me about 2-3 hours of tinkering). I also updated the "firmware", which required to unit to be plugged into the car OBD port for power. The software is quite good for Asian and European brands, but the listings are not so good for American models, but it's still a very good deal and worthy of owning. I own a 2014 Silverado, and the software does NOT list Silverados. The latest USA truck is only 2019 or EARLIER. I found it has 2014 TAHOE. And I used that setting to scan my truck. It actually worked. I also installed the AUTOCOM software. I think it's the same shit. I really like the unit, but I wish it was more complete for American models. But even if a car is not on the list, the unit still works.

[@iamcarhacker]

Thanks for insights I didn't know it don't work well for US cars.

[@Jr._.Caraballo]

On the top right corner there is a button called eobd witch automatically finds your car, it uses protocols to communicate with the models, your car might not be listed but the protocol it uses might be supported!

[@marcmakes1725]

The GM vehicles use SAE J1850 VPW I think the tool will support that but it doesn't appear to do more than basic functions.

[@gerryfinnegan3942]

Thank you for your work. Will the software work in (Linux) VM machine ?

[@iamcarhacker]

I have no idea sorry

[@VeniVidiVici444]

I have filled the additive tank on my Volvo V70 1.6 Diesel Eco Drive (2009) and reset the level to show it as full. However, when I clear the fault code and start the car, I still get a code indicating the additive level is low, even though the program shows the tank as full.

[@AGU_VDB]

Thank you so much for this But Can it do coding services Like unlocking hidden features in the car

[@iamcarhacker]

Hi I am not sure right now, I will check it when I will be in Garage.

[@Tegelane5]

On VW, with older version I could activate cruise control on Golf 4 and 5, so atleast on VW you can code. It is not very simple, but possible.

[@ilikecustard]

Hi, thanks for tye great video. I am thinking of getting one of these, will it code out egr/dpf errors? Or can you recommend something that will?

[@mehdiaz6786]

Thanks for free buyers guide PDF ,,,very useful information

[@iamcarhacker]

Most welcome, I am glad its helpful.

[@VeniVidiVici444]

Can you reset DPF additive level?

[@VeniVidiVici444]

I have filled the additive tank on my Volvo V70 1.6 Diesel Eco Drive (2009) and reset the level to show it as full. However, when I clear the fault code and start the car, I still get a code indicating the additive level is low, even though the program shows the tank as full.

[@marcmakes1725]

The thing I hate about Aliexpress is every time I click on your link, or anyone else's I get shown a completely different tool. Makes you wonder if you actually getting the right thing. Prices also range from $35 to $85 It looks like some come with extra cables for the higher price but some don't.

[@iamcarhacker]

Just copy link in browser It should show you exact linked product. If it directs to app it shows different

[@jonaphersalapar6905]

thank you so much for sharing your knowledge .im from the Philippines

[@iamcarhacker]

Welcome!

[@johnjrgensen701]

This is good info. My delphi seem to not talk to engine. My fulpump is "off" I cant turn it on...

[@iamcarhacker]

Good im glad its helpful!

[@kalarustenly1699]

Can you check the Nissan Xtrail coil without checking the engine, because the car is limping and there is no DTC, thanks

[@rasparcapac]

Hi, at 5:45 you have established the connection with the car. I have selected the correct COM and updated the firmware, however it seems my car will not connect to the Delphi software :(. I can read live RPM data via eOBD, but cannot the car manually for testing my blinkers or writing a new key. Can you advise me how to establish a connection? (BMW 1 - 2013 N13 engine)

[@TheSpress]

Nel link di A.e. che hai lasciato ci sono due versioni , 1 con chip rossi e 1 con chip neri . Mi sai dire la differenza e se uno è meglio dell'altro ? Grazie

[@lab____2003]

I am thinking about purchasing this device. I would prefer it on a tablet with windows installed. In your opinion does the software seem to work well with touchscreen?

[@iamcarhacker]

Never tried on tablet sorry dont know

[@RajaUmerKhalid]

Hi i have bv 206 hagglunds with styr engine..i dont see styr listed in slect brand option....how can i check with delphi ds150e

[@matee1836]

With the connector you use, does it connect to all cars?

[@iamcarhacker]

Most of them

[@ArthurMureșan]

hello cand you erase codes? I have airbag error because i removed seats. can i erase it ? pls answer thank you

[@iamcarhacker]

If there is unplugged wire you cannot erase this code...you could connect it to resistor and than erase code

[@CristinaTiboca]

its plugged. But i started the car when was unplugged. after i pluged it back the error didn't disappear

[@iamcarhacker]

@@CristinaTiboca If your cable is plugged you should be able to erase light with this

[@3695v]

Hi, you said that this is a clone... Clone of what? What is the original product? How safe is it to use in expensive cars? Does it have an option to start a dpf regeneration? Thank you

[@iamcarhacker]

I tried on gasoline so dont know about DPF regen but it had other service functions so probably can do regen....and its delphi clone

[@solskivenrt7516]

I keep gjetting No vci found! Light in the vci is on. If i search by bluetooth i get Autocom dpt 100151, but No if i do the same for port.. DELPHI software What can be wrong pls 🇳🇴

[@timmccarthy5737]

Will this do a regen on a vw crafter 2014 cheers

[@entertainmentguy4509]

which version from the link have u choose? V9.0 with BT or Multidiag with BT? Does it support Hyundai,Toyota,Citroen etc?

[@iamcarhacker]

I have v3.0 with BT. Should work on all brands, I tried Toyota and Fiat, worked on both.

[@entertainmentguy4509]

Thank you for feedback. Do you know maybe what is the difference between Black NAIS Relay and Red NEC Relay ? @@iamcarhacker

[@joppoj8183]

⁠@@iamcarhackeralso curious whether you know the difference between nais and nec relay (cannot really find in description or on the internet)

[@iamcarhacker]

Sorry I have no idea what are these relays@@joppoj8183

[@rexisretro]

so its basically good for any car up to 2021 right? nice video

[@iamcarhacker]

Thank you...should work good yes but havent tried on that many cars

[@PartyManCZ]

What version is that? I tried to order it from the link but there are many versions that look the same, and also you can choose the relay color for some reason… Thanks.

[@iamcarhacker]

V0.3 Bluetooth

[@PartyManCZ]

@@iamcarhacker Do you mean V3.0 ? Also what color of the relays should I get? Black or red?

[@iamcarhacker]

@@PartyManCZ I never looked inside mine, I think I have red

[@PartyManCZ]

@@iamcarhacker Okay, thanks!

[@_monti142]

if i understood correctly i can prime the fuel filter after replacingi it on any car? for example can i run the fuel pump on bmws? bmws use inpa, if this can do that they i dont need the bmw specific software? i need to be able to prime the fuel filter on diesel engines, im starting a mobile car maintenance service and will need to replace the fuel filter on many cars, id be mortified if the customer's car doesnt start after i did the fuel filter change

[@iamcarhacker]

I don't think all cars support this function....for example i just tried on chevrolet cruze and not this and any other scanner gave me option to prime fuel filter...so cannot find out if this one can do it or not I don't have other diesel cars available for test right now

[@MrLeslloyd]

@@iamcarhacker Delphi filter has to be manually primed.

[@cavusabri]

Hi, can we prime fuel on Vw TDI engine with this device?

[@iamcarhacker]

I think yes but I haven't tried personally

[@solskivenrt7516]

Can i pay you for bassist in gjetting my vci run on Delphi - i have same software as you..?

[@iamcarhacker]

Hello sorry but i really dont know how to help you mine works fine...maybe try asking sellers on Aliexpress they should know how to solve

[@filipover2237]

It says vehicle not responding! Please help.

[@iamcarhacker]

Have key in run position?

[@XmanXmen-xn3ml]

Please does this scanner generate PIN codes for programming ecu or immobilizer key?…

[@salemhardan6412]

No

[@shortsja8694]

Hi dear does this work for odometer check

[@iamcarhacker]

Its not that good because it doesnt read data in all modules

[@shortsja8694]

@iamcarhacker ok thank you can you please recommend me one for odometer thanks

[@bennymihut4497]

Can I stop using us styles from Delphi?

[@spartan187]

Thank u mate can we do remapping stage 1 with this software

[@iamcarhacker]

No

[@frafar01]

does it do dpf regeneration on diesel engines?

[@_monti142]

DPF regeneration is only done while driving, at a high rpm for prolgoned time, take a highway trip somewhere at least once a month

[@haroldthibault9921]

@@_monti142 Not only. You can force DPF regeneration with a bi-directionnal scantool. Despite I would not recommend to do so. Forced DPF regeneration is always a high risk of destroying the DPF if you don't know what you're doing !

[@JimmyUsumannSwarleyjr]

What window version does it use? 8 or 10?

[@iamcarhacker]

10

[@TheocikoSsS]

Is there a link to just download the software??

[@iamcarhacker]

Don't have I installed from CD. But if you bought it they will send you link if you contact them I think.

[@salonh2715]

my friend what delphi version you are use,the number please

[@iamcarhacker]

Its this one www.aliexpress.com/item/1005004931561288.html?spm=a2g0o.order_list.order_list_main.10.669d1802uF0YKq

[@ebenezeralayande6502]

Does it check for transmission

[@iamcarhacker]

Yes

[@andreasel3413]

Is this compatible with my Toyota aqua 2020. Can i check if someone rolled back the odometer? Is there a device compatible that i can check with

[@iamcarhacker]

It can read all live data so you can check mileage records in multiple modules with it and potentially discover mileage fraud.

[@andreasel3413]

@@iamcarhacker the other diagnostics you suggest on amazon are compatible as well?

[@iamcarhacker]

@@andreasel3413 Techstream, Thinkdiag2, Topdon artidiag 900 lite will work as well

[@Tonda_L]

Please send link download software in diagnostic thaks you 😉

[@iamcarhacker]

I dont have link sorry. I installed from CD

[@Tonda_L]

@@iamcarhacker and it wouldn't be possible to copy it from a CD and upload it to a mega drive, for example, thanks

[@iamcarhacker]

@@Tonda_L I don't want to share software that I am not licensed to distribute. And besides you need an interface for the software...if you have interface just message seller who you buy from and he will send you software

[@kylekc6845]

Can yeah Regenerate DPF 🤔?

[@iamcarhacker]

Maybe...i didnt have diesel connected so dont know for sure

[@salemhardan6412]

Yes

[@jonathanhigginbotham6964]

Doesnt ship to the US

[@iamcarhacker]

Ohh to bad...maybe try another seller lot of them are selling this on aliexpress

[@mrwho634]

This is not applicable for U.S. vehicles I already checked

[@iamcarhacker]

Yea already some guys commented it doesnt work well for us vehicles :/

[@salvatorehayes2753]

COMPLETE JUNK If Your Live In The USA. If You Manage To Get The Software Working You Will Find Out It Supports No Special Functions. If You Live In The USA This Is Essentially A Bulky Over Priced Code Reader With Limited Support. Tons Of Vehicles Are Not Listed. I Tried It On A 2015 Ram 2500 Gas And Only Could Read P Codes And Live Data. No Special Functions. Tried It On A 2012 Nissian Maxima And Same Result. Mind You The Only Codes Can Read Are P Codes, You Cant Read Any B, C Or U Codes, So No Air Bag, ABS etc. Im Extremely Disappointed And Hope No One Goes Through The Trouble Of Trying To Make This Work With Northern American Market Vehicles Just To Find Out What I Did. My Goal Was To Have A Scanner For Diagnosing Air Bag Lights, Traction Control Lights etc. This Wont Do It. All You Can Do Is Read P Codes. Same Thing A $12 OBD Scanner / Torq App Can Do. However Torq Is Way More Capable.

[@entertainmentguy4509]

After u have installed the software, have u got information by windows defender that u have trojan malware in your system? Tigger! Rfn

[@iamcarhacker]

Yes, I there were 2 keygens, the one that was zipped worked without virus. BTW thats why I use seperate laptop for these software you never know.