Delphi DS150e Clone. Cheap Quality Parts V3 vs BAD Clone V9. Let's open it and make a Comparison.

I made this video to show you the difference between a good Clone DS150e and a very poor quality one.
The Price difference between one and the other is a few Euros. Don't be fooled by Sellers and ask for Pictures with the Motherboard.
PCB. V5 or V9 version will not connect on cars Opel or BMW range after 2009-2010.
and I also don't go on Trucks.
I know that the Price is Low and for this Reason you prefer to buy such cheap clones, but I tell you that are other original products that work on Cars until 2021 and which can be updated and connected on the Smartphone, which costs only 100-120 euros
Ich habe dieses Video gemacht, um Ihnen den Unterschied zwischen einem guten und einem sehr schlechten Clone DS150e zu zeigen.
Der Preisunterschied zwischen dem einen und dem anderen beträgt einige Euro. Lassen Sie sich nicht von Verkäufern täuschen und fragen Sie nach Bildern mit dem Motherboard.
PCB. Die V5- oder V9-Version kann nach 2009-2010 nicht mehr mit Opel- oder BMW-Fahrzeugen verbunden werden.
und ich fahre auch nicht mit Lastwagen.
Ich weiß, dass der Preis niedrig ist und aus diesem Grund bevorzugen Sie es, solche billigen Klone zu kaufen, aber ich sage Ihnen, dass es sich um andere Originalprodukte handelt, die bis 2021 auf Autos funktionieren und die auf dem Smartphone aktualisiert und verbunden werden können, was nur 100 - 120 Euro kostet.

[@MrEddiedding]

Thank you for your great expirience. God Bless you Sir.

[@YOYODiagnostic]

Thanks for watching and subscribe 😊

[@krisvo2738]

Hi, thank you for your nice review, it's very usefull! Where can i find a good supplier or can someone give me a link to webshop where you can buy the good boards? I know it's not 100% trustable but at least it's a step forward if they are willing to show wich board they will sent. Thx a lot!

[@jannesc840]

Hello, thank you for the video. I ordered the delphi with V3 motherboard but they send me the cheap version with V9 Motherboard. Can I still use the V9 version? Is the only downside that it won´t connect to certain brands or can it actually damage electronic components of my car? I have heard in another review that bad clones can damage the ECU for example is this possible with the V9 motherboard? Sorry for the amount of questions... I´m just unsure wether I can use the product I got without damaging my car. And can you please tell me some other diagnosing products that you mentioned in your video description? Thank you very much!

[@YOYODiagnostic]

Hello, as long as you only use it to read and delete errors, everything will be ok.

[@kasperscream4341]

Hello, does this diagnostic have voltage stabilizers

[@BMMW3]

Thanks

[@YOYODiagnostic]

👍

[@leeaxon269]

Hi I just checked my pcb board on my delphi it's looks like your better version. Mine says on the board TCS MAN V6.0 is that the best one then

[@YOYODiagnostic]

Hello. if it has the components that need to work acceptably, this is important. Chinese sellers give all kinds of names to attract you to buy. they often give different names to the same garbage

[@alfredogiwisch2871]

The problem on cheap chinese copy is the relays matrix to route the signals acording to the ECU interface. Fortunatelly I received the original DS150e with the 21 relays board and DB15 cable connector.

[@giosuxitashvili9473]

Can you send me a link where you bought it?

[@arturartur6099]

Hello, I wanted to buy delphi but I have no idea which is better. Do you have a trusted seller where I can buy a good delphi? Thanks for all

[@YOYODiagnostic]

Hello. stop buying all the garbage from china(all this Clone). if you want delphi buy original. if you want a multi-brand tester you can look at companies like Foxwell, Xtool, Autel, Ancel. than to give 40 euros on a clone that can be good to throw away, you better pay 100 euros and have an original tester. any tester can scan your car for errors and give an error code.

[@fierakuitali9313]

@@YOYODiagnostic which of this tester you mentioned is better

[@gilleskirch7403]

ok,sounds good..but..can you recommend any site to buy the good one? Heard a lot of ecu failures exactly because of these cheap clones from china. I want one but i don´t want to destroy my ecu cause of some cheap electronics.. thank you. best regards

[@hauii5516]

i can sell you one, a good one

[@Jude5ys]

@YOYO Diagnostic so what do you recommend to buy for a starter?

[@YOYODiagnostic]

Thinkdiag. It's only 120 euro.

[@NasdaqNova]

Mein Board ist ein V.9.1, was lässt sich dazu sagen?

[@ruisimoes3638]

do you know if you can activate a function in a smart with tha vci + delphi? example the paddle wheel gear shifer.

[@YOYODiagnostic]

Hello. I have not tried any Tester in Mercedes Smart. I think I only worked on such a car once. I'm sorry I can't help you with correct information.

[@user-dy6yi5oy34]

You definitely need Star Diagnosis.

[@Pufache-ef9mx]

Hi, I have a Delphi DS150E device that after installing the software and VCI and USB drivers, at the end when I want to do a final test VCI connection via USB / BT (Com port) the device does not do the test, it disconnects. What's wrong with this device?

[@mikajones3018]

Drivers

[@jomentyp1411]

Is that PCD needed for Delphi program? Can i just use a OBD2 to USB and have it working?

[@hauii5516]

Its needed

[@slobodank76]

Is there a difference in functionality? I am unable to reprogram injectors on Nissan X-trail Diesel 2009 T31 . Is this due to bad clone?

[@YOYODiagnostic]

it is of very poor quality. it does not connect to opel brands. bmw after 2009. and does not work on trucks. Normally they should let you code for injectors but I'm not sure

[@slobodank76]

It's a software issue had to select 2009 model and it was ok.

[@YOYODiagnostic]

@@slobodank76 thanks for the information but i am not interested in this diagnosis. it's a shitty clone. I'm just showing you that it's a clone after another clone. don't waste money, buy the original and you'll really see what a Delphi tester is

[@user-bq9pm4hw4e]

Hi, where I can buy.

[@JnnNkc2205]

Hi,recently i bought this clone,the better one. Main board is TCS V3.0. I install everything but it has problem to establish connection with car. I tried on Ford,no success. On Audi A6 2002,it establish connection,but it cant read any data. Once it managed to read some error codes on Audi and that was it. Its says Communication failed. I have 2 laptops,one new and one old,same on both. Its new one,never used,with two boards.What could be the problem? Thank you.

[@YOYODiagnostic]

Hello. Open it and take pictures. email to see what it's all about.

[@JnnNkc2205]

@@YOYODiagnostic Thank you. What is your email? I cant find it.

[@YOYODiagnostic]

@@JnnNkc2205 [e-mail]

[@user-cx8om2bp9n]

Can you send me a link to a good interface ?

[@dfgdfg6140]

Hi Where did you get this good clone? Because wherever I look, it's only bad.

[@YOYODiagnostic]

Hallo. I help you. but when you ask for something you can at least subscribe and like it, so we can create a bigger community.

[@dfgdfg6140]

@@YOYODiagnostic ok

[@YOYODiagnostic]

pcb v3 is in WOW snooper, if you install 2017r3 you have to do a firmware update from the program and you will be able to use it with both programs (Delphi and WOW). Or Delphi the yellow ones.

[@dfgdfg6140]

@@YOYODiagnostic do you have a link to some verified seller?

[@jazzyjeffrey2034]

@@dfgdfg6140 dont belive in aliexpress sellers...pictures show v3 but they give v9....

[@dyxidy]

Hello, For me, the gold on the left is the "good" Clone. What is the firmware that can be uploaded because I currently have 1622, but how can I upload 3200 or 3201? Can someone help me with this, whether it is a recommendation or not?

[@YOYODiagnostic]

Hello, yes you can but it's not recommended. Buy a single Board.

[@kalarustenly1699]

Excuse me, sir, would you like to know the original Delphi 150e, how much does it cost, thank you

[@YOYODiagnostic]

Around 2400 Euro

[@aymanman5232]

I,v got the 21 red realy on av9 colne.dose this tool do the full work or should i look for another one

[@YOYODiagnostic]

Hello. You can forget this version v9. It is one of the weakest clones, if you want functionality, buy one with a single motherboard, quality A. You won't have problems with functionality. Make sure it has Bluetooth 4!

[@user-we9ml4lx7y]

самый лучший клон автоком покупал алиекспрес магазин EKETOL

[@attilamadarasz3630]

What ab v8 ? It's similar then v9 but came like your v3 processor but relays like v9

[@MrHeem94]

OMG my ASMR.

[@zvone1990]

Is it matters that the board has 21 NEC relays or must have also 2x36 pin conncection between panels? Thank you.

[@YOYODiagnostic]

Must be all relays and PCB double connection

[@jazzyjeffrey2034]

What can the problem be if the v3 pcb is not connecting to ECU of vw golf.

[@YOYODiagnostic]

you should change the 2 chips (E-L9637D). I see I have a lot of questions about delphi. Soon I will post a video with complete rework.

[@jazzyjeffrey2034]

@@YOYODiagnostic is this to replace si9241a chip....looks different on schematic....no fault pin on 9637d.

[@abushamma7732]

But it works.

[@tothlaszlo8008]

Hello! What is a good clone serial no? Thanks!

[@YOYODiagnostic]

Single board

[@jackburton5085]

whre i can buy the original one without the software at a decent price?

[@YOYODiagnostic]

type in Google the name of the manufacturer and look for the website address

[@ReDoZzZz]

where can i buy a bluetooth chip so i can install on my delphi interface?

[@YOYODiagnostic]

I don't know if you can find that model except in those clones. Rather than buying separately, it's better to buy the whole clone

[@DiagnosticDjelfa17]

AliExpress .

[@benob6746]

Bro, how can we know where to buy a good clone ? Literally nobody wants to send pictures from inside or to let me opet and see inside.

[@YOYODiagnostic]

Send me a Email

[@benob6746]

@@YOYODiagnostic Im sorry, I can't find your email nowhere.. Do you mean I send a private message on KZbin?

[@YOYODiagnostic]

@@benob6746 [e-mail]

[@Akakakadd]

Hello can you send it to me as well?

[@womacko]

keep searching.. dealers on Aliexpress mostly show the insides and advertise them.

[@giosuxitashvili9473]

Can you send me a link to where the original Delphi is for sale

[@YOYODiagnostic]

Search on Google for Delphi company.

[@slobodank76]

where do you buy original adapter from ie, 100-120 euros ?

[@YOYODiagnostic]

Hello. Unfortunately I did not understand your question. Be more explicit please?

[@legin3753]

@@YOYODiagnostic he means original delphi i think

[@DiagnosticDjelfa17]

AliExpress

[@truebuild1745]

@@legin3753 I think he means the adapter that connects to a mobile phone, that Yoyo talked about that costs about 100-120 euros. I would like a link to something like this that Yoyo recommends. With the old Delphi 2016 I could do things like open and close the EGR valve and see the revs change and thus prove that the EGR valve was working.

[@truebuild1745]

Yoyo; Am I correct in what I say above?

[@TheVladIL]

Hello. On v3 what needs to be done for rework?

[@YOYODiagnostic]

Hello. I'll make a video about it

[@BAC54746]

V3 Real 9241 ou V9 Bluetooth Hi, what version do I need? V3 Real 9241 or V9 Bluetooth Which is the better of the 2?

[@YOYODiagnostic]

V3

[@mikajones3018]

BAD Clone V9 can it be reworked sir

[@YOYODiagnostic]

Hello. Unfortunately no . If your budget does not allow you to buy another Diagnostic and you want to use the same Clone, buy at least one of good quality such as a Single Motherboard.

[@mikajones3018]

@@YOYODiagnostic Removed two fake chips and k line started to work... I have v9.2 with 14 red relays

[@user-bq9pm4hw4e]

Hi where I can buy.

[@YOYODiagnostic]

I'm not a seller 👍

[@nyikadzinotsikidze3444]

Chinese they just went off just like that ...

[@YOYODiagnostic]

👍

[@francesc2043]

al final todo esta hecho en china

[@YOYODiagnostic]

👍