Tire size, your manufacturer actually lists it accurately on their website. My Falken Wildpeak 35's are actually 34.5.
@HouseofToes Жыл бұрын
I just bought a 2021 Jeep with the mini on it and I had no clue what it was. Thank you for this and all the other videos!
@zautomotive Жыл бұрын
Plenty of more to come! Let us know if there’s anything specific you’d like us to cover
@deeprai3913Ай бұрын
after everything can i remove tazer? setting will be same or change to the factory settings
@zautomotiveАй бұрын
@@deeprai3913 you can remove the Tazer and the speedometer calibration will remain
@MrAVID526 Жыл бұрын
Can you change mutiple items before performing the full reboot, sleep cycles and test drive? For example can i change tire size, gear ratio, and tpms and then do the reboot, sleeps, and test drive? Or do I have to change tire size, perform reboot, sleeps, and test drive and then repeat for the other changes i need to make?
@zautomotive Жыл бұрын
Yes do the one full reboot, sleep cycles, and drive cycle when you’re done adjusting all your settings
@MrAVID526 Жыл бұрын
@@zautomotive awesome! That is definitely easier and less time consuming than after every change. I appreciate the reply.
@HANK_SCORPI0 Жыл бұрын
Will the TaZer mini ever see an app where we can make changes from there as opposed to making changes on the dash of the vehicle?
@zautomotive Жыл бұрын
maybe
@HANK_SCORPI0 Жыл бұрын
@@zautomotive I think this would be a game changer and hope to see it in the near future.
@zautomotive Жыл бұрын
@@HANK_SCORPI0 👍🏼
@mcoffroadinaz4075 Жыл бұрын
I dream of that day... along with a working sway bar disconnect total control and total blackout... I'm a simple man.
@zautomotive Жыл бұрын
@@mcoffroadinaz4075 we have swaybar disconnet - "disconnect sway bar in 2WD up to 30mph or at any speed if mapped to a button"
@marvinjoy4233 Жыл бұрын
after setting for tire size do I remove the tazer JL lite ?
@zautomotive Жыл бұрын
You can, yes. If you’d like to utilize the live feature settings though, it would need to remain plugged in
@josephsherrell6235 Жыл бұрын
How do you do this with the manual there is apparently more steps and the instructions are not really making sense
@zautomotive Жыл бұрын
email support@zautotech.com
@ajgMillers7 ай бұрын
I have factory 4.88 gears. Do I need to change that in the Tazer Lite? Or will the factory settings overrule. I just upgraded my tire size. Not sure if I have to let the tazer know the gear size though
@zautomotive7 ай бұрын
If the dealer already flashed it for the new gears then you don’t have to set it in the Tazer menu
@benjaminjones4601 Жыл бұрын
I recalibrate the adas system. I use the security gateway to gain access when changing the windshield. When disconnecting this will it reset my tire size?
@zautomotive Жыл бұрын
You can disconnect the TaZer after recalibration of the tires and it will hold
@JeepWrangler195711 ай бұрын
I have tires and rims coming for my 2020 JL. These are the largest tires that can be used without a lift. I don't have a nav screen like shown here. Is the process still the same?
@zautomotive11 ай бұрын
This is the EVIC screen above the steering wheel not the navigation/radio
@saradavis61017 ай бұрын
Will this calibrate your speed once you do the tire size??! We just purchased and done the steps but my speed is still off
@zautomotive7 ай бұрын
These are all the steps to calibrate the speedometer. If after the drive cycle you see no change, please email our customer support for assistance- support@zautotech.com
@BirdsMojave238 ай бұрын
Do you have a video showing the full processes for a manual transmission JT?
@zautomotive8 ай бұрын
Sorry, we do not have a manual transmission Jeep JT as part of the Z Automotive fleet. Here is the process to calibrate for that vehicle, www.zautomotive.com/zpu/instructions/jlm6relearn.pdf
@user-jq4oq5xq9o7 ай бұрын
Once I recalibrate the speedometer can i take it off or i have to leave it on
@zautomotive7 ай бұрын
Can remove it
@23162077 ай бұрын
If I leave the Tazer installed when I bring the Jeep into the Dealer for just oil change and tire rotation will they void warranty?
@zautomotive7 ай бұрын
www.zautomotive.com/FAQ/
@chogg6114 ай бұрын
I would remove it. As it might vanish mysteriously. No need to give someone an opportunity to steal it.
@marvinjoy4233 Жыл бұрын
I installed the tazer today and set the tire size. do I unmarry it and the settings stay in the Jeep ? I have 2 more services at the dealer and them I'll probably leave it in.
@zautomotive Жыл бұрын
The settings will revert back to the default settings once unmarried, so you'll have to reset the tire size after getting back from the dealer
@marvinjoy4233 Жыл бұрын
@@zautomotive Ok thanks
@Mark-zq2iw Жыл бұрын
How did you remove the front kick panel? I can't get to the connectors to remove them from the security model
@zautomotive Жыл бұрын
there's a little tab that needs to be pressed in to release the connectors
@Mark-zq2iw Жыл бұрын
@@zautomotive I see the tab, but I can't press the tab and pull the connector out at the same time. I probably need to remove the kick panel, like shown in this video, to get to the connectors easier and have more room. My question is how did you remove the kick panel? In the video you showed how you put the panel back, but not how it was removed.
@zautomotive Жыл бұрын
@@Mark-zq2iw I see. The kick panel has little tabs on the back, essentially just takes even brute force to pull it off or can pry it off tab by tab with a plastic pry bar. I can send you a picture of what the back of the kick panel looks like if you send me an email at nsilvia@zautomotive.com
@walwu001 Жыл бұрын
Can you kill the speed limiter on the wrangler 392?
@zautomotive10 ай бұрын
No
@Haro7541011 ай бұрын
The latest update was 1/19/2023. Is that right? No updates in 9+ months?
@zautomotive11 ай бұрын
Is there a problem with the current version?
@Haro7541011 ай бұрын
@@zautomotive nope but got used to updates every so often. So I thought I was having issues getting updates. Sounds like that was it.
@zautomotive11 ай бұрын
@@Haro75410 no updates have not stopped if that’s what you’re implying. If you keep up with our content, you may notice that we continue to put out updates for the Tazer and Tazer DT, with the goal of putting out an available version of Pin Lock and all the new features involved with it. After we iron out some bugs and have a stable version we will move on to the Tazer JL
@terryknight1670 Жыл бұрын
Why does my Tazer Mini always blink Red ?
@zautomotive Жыл бұрын
To show its sending a signal
@23162079 ай бұрын
does this work on a gladiator sport model?
@zautomotive9 ай бұрын
Yes
@GenX_Dave10 ай бұрын
wth do the tpms sensors have to do with calibrating the speedometer?
@zautomotive10 ай бұрын
If your tires are incredibly low on air, they won’t be the same height as a tire that is correctly filled up with air. Common sense
@GenX_Dave10 ай бұрын
@@zautomotive I run my tires at 36psi on the road…don’t care about the speedometer off road
@zautomotive10 ай бұрын
@@GenX_Dave that part of the video was a reminder to have them at the road tire pressure… again, if someone had their tires very low and then measures the height, it would not be the same height as a tire with proper road tire pressure
@GenX_Dave10 ай бұрын
@@zautomotive should I input the true measurement? or what’s on my sidewall?
@charlesreally86869 ай бұрын
Will this calibration help with MPG?
@zautomotive9 ай бұрын
It’s the tire size that determines the MPG. Larger tire size, worse MPG
@damienhuggard Жыл бұрын
How does one do a sleep cycle if the doors are removed?
@zautomotive Жыл бұрын
Opening and closing the door makes it go to sleep faster, so if the doors are removed you would just have to wait longer. Wait until the screen and dash is fully off
@damienhuggard Жыл бұрын
@@zautomotive Thank you!
@servandoleal7349 Жыл бұрын
My brother has a 2020 Jeep Rubicon Gladiator with 40s. Will this work on it? If not, do you have any recommendations for fixing this issue with his Jeep. Thank you for your time.
@quepasatim10 ай бұрын
Why did it blink serv 4wd??
@zautomotive10 ай бұрын
Timestamp??
@quepasatim10 ай бұрын
1.44
@zautomotive10 ай бұрын
@@quepasatim sometimes lights flash when marrying
@bennera5132 Жыл бұрын
Love my tazer. Hate to be that guy, but wouldn't we want to measure from ground to center hub and double the result? The bottom half of the tire is compressed under load while the top is not. The distance from hub center determines number of revolutions at a given absolute speed. Not taking this into account on the upper half of the tire ignores the load compression and over states tire size. Bottom half radius is the constant...Top half radius never happens. Also, for me, once I got a decent measurement I used a GPS enabled speedo app on my phone to check the tire size change in motion. After a couple adjustments, I got the onboard speedo and the app to agree exactly!
@larrybushard30116 ай бұрын
They wouldn’t have to do so many videos if they made it user friendly
@zautomotive6 ай бұрын
Feel free to buy a different product if it’s too complex for you 🤷🏻♂️
@GenX_Dave10 ай бұрын
also, this video leaves out waiting 60 seconds after the dash goes dark…according to the directions online, you are supposed to wait 60 seconds after the dash goes dark. Why does he not do that. If you guys are going to make support material for your customer base, at least make sure the information is consistent and accurate
@zautomotive10 ай бұрын
Yes, the manual says 60 seconds after the screen goes dark and that is a good habit to get into to solidify settings. Although generally once the screen goes dark, the vehicle is in a sleep state. If you’re unsatisfied with the video material, feel free to just stick with the written manual
@GenX_Dave10 ай бұрын
@@zautomotive I’m unsatisfied with everything…including your tone