Laser Engraving CRAFT FAIR SETUP with a Jackery Explorer 1000 Pro

🔗 Test Files & More on My Website: samcraft.shop/ 🔗 My Laser Jigs: samcraft.shop/... 🔗 Check out the xTool and Jackery Combo Units Here: www.xtool.com/... 🔗 Product link in the official store: bit.ly/3rpNuRc (Discount: 27%) 🔗 Product link in the Amazon store: amzn.to/3ERq4Hq (Discount: 27%) Date: 10/10-10/11 🔗 Jackery store page: bit.ly/457IKxp ⬇️ MORE LINKS BELOW ⬇️
Jackery Prime Big Deal Days Promotion for the year 2023 is between October 1st and October 11th, big deals on October 10th and 11th. Theme: Fall For Solar, Prep For Power Promotion: Discount Up to 40% OFF on Jackery Amazon Store and Jackery Official Website Surprise: Follow Jackery on Facebook and KZbin for the Mega-Live Event on Oct 10th! Tune in for SURPRISING GIFTS Worth $50,000!
🔗 Where I Get All My Laser Files & MUCH MORE: www.creativefa...
🔗 Laser Wood and Acrylic! MakerStock (with a Discount Code for You): makerstock.com...
🔗 REAL Laser Safety Glasses: amzn.to/3YlhAAN (Diode & Infrared) amzn.to/3FtkbjP (CO2)
🔗 All My Laser Engraving Videos: • Laser Engraving Business
🔗 Our Family's Small Business: greenacrehomest...
🔗 xTool F1: 🇺🇸 US: www.xtool.com/... 🇬🇧 UK: uk.xtool.com/p...
🔗 xTool F1 Slide Extension Table: www.xtool.com/...
🔗 xTool P2 🇺🇸 US: www.xtool.com/... 🇬🇧 UK: uk.xtool.com/p...
🔗 xTool D1 🇺🇸 US: www.xtool.com/... 🇬🇧 UK: uk.xtool.com/p...
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
#samcraft #laserengraving #jackery #solargenerator #vanlife #outdoor #offgrid #portablepowerstation #adventure ‪@JackeryInc‬
*DISCLAIMER*
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!

[@Samcraftcom]

🔗 Check out the xTool and Jackery Combo Units Here: www.xtool.com/products/xtool-f1-x-jackery-power-station?ref=samcraft&variant=44085666873583

[@lightspeedlaserengraving6048]

I use my Jackery 1000 (original) at craft shows and flea markets. Love it and have no issues ever with running out of power.

[@Chuck_Burke]

It was quite helpful...thank you for a great video...I know it's a lot of work...but you did a great job!!! Thank you.

[@steveferguson1232]

Great video Sam. It’s cool that you put this out just after xtool launched their partnership with Jackery on Wednesday evening. You showed us real world time and I believe they used the smaller 500 model. It’s cool to see these power stations progress in their technology and hope you have more of this on The Juice Box channel

[@Samcraftcom]

It was purely by coincidence too! I didn’t know about xtool’s plans when I had Jackery reach out asking if I had a creative way to show their unit. :) And yes!! The Juice Box has a new item to dive deep into and review now too! :)

[@spinecollector9931]

lol I liked your little role play scenario 😂

[@debbydrach]

I clean houses for a living and most of my orders are for those people, but I love your products and work, thank you so much !

[@debbydrach]

I especially liked this video 👍 and I want that Christmas ornament 😂

[@HoneyHollowHomestead]

You've got some cute ornaments there.

[@Ricks2Cents]

*That UPS comes in more & more Handy.*

[@rcarroll05]

I just purchased this exact Jackery so perfect timing on putting this together. Very nice to know it should last me all day. Love the ornaments as this is really close to what I will be doing. Now to work out pricing for my area. Everyone this that my labor and materials should be free 😂.

[@deannaoverstreet4146]

Thank you Sam! Enjoy your videos!

[@judgem9150]

Great job as usual, thanks Sam.

[@cliff5240]

Nice job Sam. One of these days I will add one of these lasers to my shop.

[@jamiekitto7778]

Thanks Sam, that is the kind of setup I’m looking to setup 👍

[@crestonsimpson1370]

I added a 100w solar panel with my jackery explorer. Adds an extra day and a half when camping and should help with this setup.

[@Tngirl68]

Sam, I am so happy that you featured the Jackery power station I have been looking for something like it to get for my mom who uses a CPAP and oxygen concentrator. She will be moving in with us soon and I have worried because we have frequent power outages in our area. I was able to buy two through your link for the price of one that I was going to buy.

[@mattsara2802]

Would this work if I was at a craft fair under a tent?

[@landreywoodworks4957]

I’ve been using a Jackery 1500 to power a 5watt laser, exhaust fan, and a laptop charger. I only charge the laptop when it gets below 20%. I only use the fan while engraving. After a 16 hour weekend we still had 35% left on the power station.

[@private15]

I see lots of craft fairs with engraving and soap booth.

[@lisaburnham7151]

Great video! I definitely need one to go with my F1. I would like to run a very small fan with it, also.

[@TP-si3km]

👍😃Danke für das Video. Sehr interessant

[@susansmith574]

Interesting

[@benjaminpastrana9662]

I guess your bestseller item is the Monogrammed Coasters

[@ugoturco8423]

Very good 👍

[@user-ij1if9fs2m]

Where are you venting to at a show? Like only doing outside shows? and venting to the air in your booth?

[@billhaley8873]

If your makers mark is the same all the time you could burn that before the show on the pieces you bring to the show

[@surfinghollywood]

Excellent content, love your sense of humor! Do you prefer that laser for speed engraving on coasters over the S1? I might need to invest in the F1 as well to speed up production.

[@JohnColgan.]

Great video. I like idea of battery inverter. You could economise s bitmore on power dont run air suction during engrave. Just suck 10 seconds at end of job surely enough to clear 1 CuFt air space

[@Samcraftcom]

Great ideas!

[@heffe2001]

Wonder how quick a Glowforge setup would deplete that battery.. The unit you tested would be ideal for what you're presenting it as, they're quick, and get the job done with minimal power usage.

[@HAbibChhuttos.1]

Okay

[@Annew44]

When will the Christmas ornaments be on your website?

[@mattarmijo5394]

Cool video! What do you think about running a 60W fiber laser on the Jackery?

[@claytondewey3367]

Great video 👍👍. Are the Christmas ornaments going to be available on your website?

[@shellyjorgensen2441]

So your saying that if you lasered non stop for 8 hours you could get through a craft fair for 8 hours or more?

[@joseceja6286]

Can you do this test with the xtool s1??

[@TF21FUL1]

What settings did you use to engrave . Thank you in advance

[@113GABE]

Hey, I got a question with removing the base plate, can you do bigger things if you lower the laser? Since there's no gantry and as long as it's in focus could you?

[@nancej100]

What version of lightburn is best for xtool m1 . Thanks like your videos learn something every time.

[@benjaminpastrana9662]

The main nose comes from the air purifier? What is so specific for the F1 for me to buy that brand and not others?

[@Samcraftcom]

Yes, the air purifier is the main culprit on noise. However you don’t have to keep it on top of the table. The house is long enough to put it under the table and be less of an issue. :)

[@rcarroll05]

The F1 has a diode and IR laser. Others only have 1 or the other. Having both types allows you to run this on many more types of materials.

[@rayjohnson1974]

another great informative video. I have the 20W xtool D1 Pro and most of my business comes from coasters. I images that can get intricate and take up to 20 minutes to complete 1 coaster. What kind of speed comparision is there on the F1. I want to look into the F1 but only if it can significantly improve the time it takes to do a coaster. Thanks again.

[@freebird1963]

you fire up the M4 with this thing ?

[@samsanderson7159]

I've been curious about power needs for a setup like this. I've been thinking about adding an F1 next year. Sounds like that air purifier is pretty loud though. It's that going to be an issue at indoor events?

[@Samcraftcom]

The occasional fan noise will be less an issue than the smoke and fumes you would otherwise produce. It’s not as loud as seems in the video.

[@plurmingo1]

on the CNC, do you have to buy separate, the different tool heads? if that made sense.

[@Samcraftcom]

End mills.. yes, you have to buy different ones based upon the milling profile you want. :)

[@Pralix2000]

Why do they call these “generators”? It stores energy but does not generate it.

[@pmartin6759]

👍👍👍👍👍👍♥️♥️♥️♥️♥️♥️

[@patshipp9195]

💖💖👍👍💖💖😄😄

[@benjaminpastrana9662]

CUJO🥹🤣🫣 🐶