ULTIMATE FILE KIT & How To Make Templates for Your xTool w/ xTool Creative Space!

🔗 Full Template File Kit: samcraft.shop/products/ultimate-template-kit-xtool-f1-slide-extension 🔗 All my Laser Files, Templates and More: samcraft.shop/ 🔗 My Pen & Pencil Template Video: kzbin.info/www/bejne/ppW3qGOirtOSrdE ⬇️ MORE LINKS BELOW ⬇️
🔗 MakerStock with a Discount Code for You: makerstock.com/discount/craft10
🔗 ChewBarka Metal Tags: chewbarka.com/
🔗 REAL Laser Safety Glasses: amzn.to/3YlhAAN (Diode & Infrared) amzn.to/3FtkbjP (CO2)
🔗 xTool F1: 🇺🇸 US: www.xtool.com/products/xtool-f1?ref=samcraft& 🇬🇧 UK: uk.xtool.com/products/xtool-f1?ref=samcraft&
🔗 xTool F1 Slide Extension Table: www.xtool.com/products/xtool-f1-slide-extension?ref=samcraft&
🔗 xTool P2 🇺🇸 US: www.xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=samcraft& 🇬🇧 UK: uk.xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=samcraft&
🔗 xTool D1 🇺🇸 US: www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting?ref=samcraft& 🇬🇧 UK: uk.xtool.com/products/xtool-d1-pro-20w-productivity-kit-advanced?ref=samcraft&
🔗 All my xTool Videos: kzbin.info/aero/PLxHrEOd7lzfFP-XzYIU_VS9GPfq1IJlBC
🔗 My Tool Review Videos: kzbin.info/aero/PLxHrEOd7lzfFgFFa7OXyIt5dhXDd6hFj7
🔗 Gweike Cloud Pro II Review Video: kzbin.info/www/bejne/f5ebkn2mrpaApJI
🔗 All My Laser Engraving Videos: kzbin.info/aero/PLxHrEOd7lzfGNRklV6k9Fxw4mV5BZpT7k
🔗 Our Family's Small Business: greenacrehomestead.com
🔗 Make Money Woodworking Videos: kzbin.info/aero/PLxHrEOd7lzfFiHAIv_UPPXoBvhmVf6DT4
xTOOL LINKS
🔗 NEW P2 CO2 Laser: www.xtool.com/pages/xtool-p2?ref=samcraft&
🔗 xTool F1 Dual Diode & IR Laser: www.xtool.com/products/xtool-f1?ref=samcraft&
🔗 D1 Pro 20W: www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=samcraft&
🔗 D1 Pro 40W Kit: www.xtool.com/products/d1-pro-10w-laser-machine-40w-laser-module?ref=samcraft&
🔷 ABOUT SAMCRAFT 🔷
Samcraft is a channel all about educating, inspiring, motivating, encouraging, and sharing the things I've learned since starting my own small business in 2018.
In today's video I take you through the creation process of making custom templates for your xTool F1 with Slide Extension table. I also show you what I call the Ultimate Template Kit for the xTool F1 and walk you through the steps to use and customize it.
🔷 VIDEO CHAPTERS 🔷
0:00 - Fancy McFance Pants Intro
1:38 - The Reason for Making Templates
2:00 - What's in my Ultimate Template Kit
2:39 - What makes my file different from others?
3:28 - Pen and Pencil Template
8:13 - Drink Coaster Template
11:07 - Military Dog Tag Template
14:20 - How to Make Your Own Templates
21:57 - Business Card Template
23:14 - Gridboard Template
25:04 - Links Below! Thanks for Watching
#laserengraving #samcraft #xtoolf1
**DISCLAIMER**
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!

[@richardpogue4959]

So that’s why I’m broke all the time, someone taught me how to fish. Now it all make sense 😂😂😂❤

[@johnhubbard6262]

See he said that, and my mind went automatically to the new fish boat I am trying to avoid buying - Fishing is a Drug for sure

[@budgetmerch]

Thanks for creating this ultimate template kit. Maybe I won't always use it but this was so useful, saving me a LOT of time. I loved the Clack Shack Jig Kit I purchased previously and I love this Ultimate Template kit as well for the extended bed. The £16 I paid here was worth every penny. Now I can quickly make a good jig for anything. 👍

[@TheDoctorRust]

Sam you are a Legend ! 🎉

[@timpindell8178]

Thanks Sam, watch every video and you are helping me and the better half understand CNC and laser all the time.

[@jamiekitto7778]

I'll definitely be using the array function now! I've been doing it manually when creating my templates. Of course your videos had me creating templates in the first place 😀

[@jasonhoffman254]

I just downloaded the files today. You are an engraving GOD. Thank you so much for putting these files out, they are definitely going to be a time saver.

[@simdym]

this is awesome. Thank you for your time making this vid! Such a timesaver!!!!

[@markblanchard5228]

Good news: Since you posted this XCS 2.0 Beta is out (but not widely available) and it looks like the final release will have both a "lock"" tool and a "sho/hide" tool in the layers. Alreading using the BETA, I can say it is very convenient having locked reference items (template marks) in a project. Thanks for your content and knowledge. M

[@shawnsellers5450]

Looks like a must have.

[@ufoquilter86]

Wow amazing, thanks for sharing

[@GnatTheGnome]

Just got your complete laser test file package to try on my Elegoo Phecda 20w. It's been fun watching your videos and I've learned a few things already, even without ever having turned my new laser on yet.

[@anonymousdiscuss9971]

I love your systematic approach to this business. Just like jigs can apply to any laser, so to can a systematic approach to tasks apply to any business.

[@dian3145]

Great video, and applies to any laser setup. Hadn’t thought about a base piece! I might do mdf as the base, as it is more stable than most thin ply I have found. Thanks for the great content, really shining as a tutor.

[@Samcraftcom]

Glad it was helpful!

[@petrablum5562]

Love it !!

[@arathenasprankle6977]

Thank you! this was very helpful!

[@Samcraftcom]

Glad it was helpful!

[@jeeper999999]

When I make my template for thin flat items like business cards or tags, I cut a half circle in the bottom of the template image and a full circle in the bottom plate same location. Makes it easier to get the items out of the jig.

[@tamaraquintero4170]

Awesome tutorial! Loved it. Thank you. Do you have a template for the Apple Watch for engraving?

[@cakpcpp]

Thanks!

[@leviteapparel]

That was amazing. Good contact love lasers😂

[@Amirah1Mustafa]

Thank you

[@someguyfromky]

So I'm just starting out with a laser cutter/ engraver. Your videos are very helpful and the file I purchased worked great. Now if I can just get more time with my laser I might be able to learn more. Thank you.

[@Samcraftcom]

Glad to help!

[@chrisoliver3851]

Great video Sam. Im new at engraving and just bought a XTool S1 will this patterns (files)work iin the S1. Thanks Chris

[@shughes599]

I like your system. On my open frame diode I often use cardboard especially for coasters. I pin it to honeycomb, run the cutouts, load it with material and put engraving in. It’s a really good for workflow for one offs. Might save some wood to make top layer of yours out of cardboard instead of wood and it lets me reuse all the Amazon boxes.

[@johnnyditommaso6807]

Great video :)

[@andreaspetersen1218]

Hey Sam. Anoter great one. Ive seen your ComMarker video as well. What do you prefer for items like your luggage tags, dog tags and cards? ComMarker or the Xtool F1?

[@Annew44]

Would you be able to do some of your kitchen gadgets with some surface engraving? Just a thought

[@LouRao]

Can I use these templates with S1 laser? Thanks.

[@swatnutz]

awsome work sam, big help and i purchased it, any chance of a finger hole to get the cards out as a v2, personally i would purchase again through your etsy shop

[@allenhuckabee3764]

Bought your cutting template send and it 10 times better than what I did.

[@CandaceFord]

Will you have these templates for the new S1?

[@jimbane1568]

Great stuff Sam. Now that you got us started with the F1, how about a video on how you store your supplies and projects.

[@Samcraftcom]

That would assume I was organized!!! LOL

[@devgrp9]

Sam - Thanks for the great video and your insight in creating these product templates. Our primary use for the xTool M1 is to fabricate templates for use in personalized hot stamping and laser engraved accessories. I've been thinking about the best way to use Xtool CS to make jigs for these hot stamping items... and you solved the puzzle with your genius methodology... so thanks! (By the way, we intend to make our jigs using chip board to match the thickness of most of our leather and paper products.) We just purchased your files templates and some other items on your website. What, if any, are your suggestions for any changes needed for use in the M1 laser bed? Thanks again for the great ideas and execution! 👍 Dick S --- Dev Group

[@darleneclark6098]

Very cool stuff. Are you going to offer custom dog tags?

[@StanG1980]

I got one more question how do you adjust the belts how tight or loose on the xtool d1 pro 40w thank you for your time

[@kenttegneskog]

That was the biggest business cards I’ve ever seen

[@robc5740]

🤜🏻💥🤛🏻 thanks

[@deenahulen3168]

I wanted to share that you inspired me to make my own template today after watching this last night!! Thank you! Wanted to share a pic but it won’t let me here.

[@robertdiffin9136]

So simple, so useful, so “obvious” once you finally see it.

[@boruchlen]

Great video as usual. Is it worthwhile to create the templates as 3 layers? The middle as a blank layer (the bottom in reality) and on each side of this blank layer, a different template? For example, the business cards on one side and the luggage tags on the other? That way you're only using 1 base board for every 2 templates?

[@ladyaj1775]

how long does it take to cut the panel with the speed on 3? I just purchased the dog tag and pencil jig

[@ginamariegarcia9461]

HI. Thank you for sharing. I am new to the laser world. I have a xtool S1 40w laser. I want to make a jig for the rotary base. This way it doesnt move. i am having trouble measuring it. can you help me?

[@howanblaze]

What size sheets are you using?

[@mikeoxmaul9386]

How do you make sure the jig goes back into the same spot everytime?

[@rickyanderson6324]

Have you moved from ortur? I used to watch when you used the ortur.

[@jimbane1568]

Sam, Question about the grayscale test. I don't understand how the notes from Sam apply on that text. It may also be that I don't understand what a grayscale test is for. Anyway no marks are left if I run it without making any changes to the setting. If I bump it up to what I guessed would be appropriate the whole circle area is the same dark shade, I can feel some variation in releif.

[@heffe2001]

These instructions definitely apply to pretty much any laser setup out there. As always, great tutorial. I also definitely second your recommenation of Makerstock. I finally got around to actually using mine, and it cuts consistantly, looks great, and is overall, a pleasure to work with. I'm going to be ordering more soon for sure.

[@Samcraftcom]

Great to hear!

[@allenthornell2763]

I'm wanting to get a laser. I found one on Amazon it's a xtool d1 pro 10W. I'm new to lasers. I feel like it would open alot of doors to my business. Do you have any suggestions?

[@ginamariegarcia9461]

do you know how to trace an image? i heard this is good for doing a jig for your item

[@TurboDecal]

Can you please tell me why the main template dimensions are 399mm x 114mm? Is this the max space on the slide extension?

[@jackhelm9852]

Over all, how do you like the F1? After watching this I am seriously considering this to be my next laser for its portability and speed. I will still keep my 33w diode and likely supplement it with another for cutting. But would like to hear any misgivings or shortfalls the F1 might have before investing in it.

[@creepmeout]

for p2 please

[@Rustierfun]

Great video, I bought it but....... I DONT see where you mention the length or a link to any material for this... Kinda something import you should mention...

[@karenhadden4980]

Great info! Thanks!

[@deenahulen3168]

What is the best type of wood to use to make jigs?

[@Samcraftcom]

I like using 3mm Baltic birch plywood, but any durable plywood around that thickness will work good, too. Whatever is strong but easily cut by your machine too.

[@StanG1980]

What software do you recommend for the xtool d1 pro 40w ? I got light burn thank you for your time

[@Samcraftcom]

I will always recommend Lightburn... IF all the machine's features are supported by it. :) For the D1 Lightburn is the way to go. For the newer machines like the F1 and P2, where their advanced features are not built into lightburn, your only real option is the manufacturer's software (XCS).

[@user-si4tk7lx1z]

Hey Sam! I have watched many of your Shapeako C.N.C Videos & purchased ny 5 Pro on the back of these & it is an ace bit of kit! & now I am into Laser as well! I am also enjoying watching you on the laser ones! You keep these videos short & sweet & fun! My burning question is regarding the X-Tool S1 Like you, I am triggered by that honeycomb base being able to move about & not square corners inside where it sits against. Have you mastered yet any "Samcraft ideas" to fix that problem for users? Execpt making a few blocks & trying to force it against the already curved side walls I fear theres no other sensible solution? I am (Was) trying to make jigs so I can engrave multiple items at once such as your business card holder or luggaeg tag etc. however as the honeycomb base / jig can be in different locations each time you load it up, it fails time after time. I have tried to line it up / eyeball it in the same place each time, but still not good enough for me. Maybe I am over thinking it?! CAN YOU HELP?! or I will have to go fishing! 🙂

[@Samcraftcom]

I'm finalizing my design for a fence kit for the S1 that will let you align the jigs every time. :) This kit will be easily made on the laser and also work for the standard S1 setup and the riser base. It should be available in a few weeks!

[@KevinBrowne-fm9nc]

Hey Sam, That sounds brilliant! Thank you very much.

[@user-si4tk7lx1z]

Hi Sam, any updates?

[@AlexSwavely]

Since you asked, the file you use to lay out your jobs is the template, the (wood here) thing you put the product in is the jig.

[@Samcraftcom]

Thank you!!

[@Zeroscifer]

Correct me if I am wrong, but this will not really work for xTool D1 pro correct? Everything on it seems have no way to use absolute co-ords which would be needed right?

[@Samcraftcom]

Correct. This file is only for the xTool F1 with Slide Extension. I've had a few requests to make some for the D1 Pro, and it's in the works. :)

[@cambion]

@@Samcraftcom - Any chance you might expand on this a bit and do a video on creating jigs for the P2 since XCS doesn't provide coords and Lightburn doesn't really support the P2 fully? Maybe a video on creating a jig jig, to easily place different jigs in the P2 precisely every time?

[@Samcraftcom]

@@cambion I am nearly done doing just that! I've designed a fence and several jigs for the P2. Running them through their checks and tweaks, then it'll be ready. :)

[@staffan7897]

Good video, but skip the background music.

[@pmartin6759]

👍👍👍👍👍👍♥️♥️♥️♥️♥️♥️

[@mattsara2802]

😂 fishing can make you go broke 😂

[@Samcraftcom]

You got that right! Stick to lasers. :-D

[@jun1977i]

Give a man a fish and you feed him for a day. Teach him how to fish and you feed him for a lifetime, my grandfather use to say that all the time lol.

[@adrimathlener8008]

The music is a bit distracting.