Lasernut 93 - AUTOBAHN [01_0017] (

Lasernut 93 went to to drive alongside the Autobahn on an paved agricultural way. Starting point is where we had to return because of video signal rate dropping. This is 1100 meters from home point - so, a new personal record! 🥳 🎉 But the crazy thing is: back on the straight road, signal is back at 50 Mbps instantly! 😲 So, if that road was only longer straight ahead, we could have gone much farther… 🤷
P. S.: Don't drive into too tall grass. Just don't.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The Car
- Losi Lasernut U4
- modified sensored brushless Bison 4268, 2000 kV
- Hobbywing Xerun XR8 PLUS, sensored hybrid
- JX Ecoboost CLS6336HV 36kg Servo
- BetaFPV ELRS Micro RX
- 4S battery
- self designed & 3D printed parts (*)
RC & FPV Gear
- DJI Googles 2 + TrueRC X-Air MKII
- DJI O3 air unit + Arduino ARM
- Lumenier AXII Duality antenna
- Radiomaster MT12 ELRS
- mini audio recorder
(*) www.printables...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- DJI Googles 2 + TrueRC directional antennas
- DJI O3 air unit + Arduino ARM
- WLToys 124007 with some minor modifications
- Radiomaster MT12 ELRS
- mini audio recorder
- self designed & 3D printed parts (*)
(*) www.printables...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[@NUeB_RCFPV]

Lasernut 93 went to to drive alongside the Autobahn on an paved agricultural way. Starting point is where we had to return because of video signal rate dropping. This is 1100 meters from home point - so, a new personal record! 🥳 🎉 But the crazy thing is: back on the straight road, signal is back at 50 Mbps instantly! 😲 So, if that road was only longer straight ahead, we could have gone much farther… 🤷 P. S.: Don't drive into too tall grass. Just don't. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The Car - Losi Lasernut U4 - modified sensored brushless Bison 4268, 2000 kV - Hobbywing Xerun XR8 PLUS, sensored hybrid - JX Ecoboost CLS6336HV 36kg Servo - BetaFPV ELRS Micro RX - 4S battery - self designed & 3D printed parts (*) RC & FPV Gear - DJI Googles 2 + TrueRC X-Air MKII - DJI O3 air unit + Arduino ARM - Lumenier AXII Duality antenna - Radiomaster MT12 ELRS - mini audio recorder (*) www.printables.com/@NUeB/collections/1038540 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - DJI Googles 2 + TrueRC directional antennas - DJI O3 air unit + Arduino ARM - WLToys 124007 with some minor modifications - Radiomaster MT12 ELRS - mini audio recorder - self designed & 3D printed parts (*) (*) www.printables.com/@NUeB/collections/1038540 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[@remyKhuong]

That was feaking Longrange😂 only O3 can had this long, anw i just had mine 1/10 cheap rc upgrade using (tbs nano, boxer tx, vista runcam, esc hobby 1080 G2). I got video on my chanel.

[@Magneticitist]

Heck yea the legendary Autobahn. That was a sweet run of solid cruising. Getting grass or basically anything wound around the tires is the worst though. Once they get wrapped up it's a done deal lol. Your ESC did good though, I was afraid it might try to crap out powering through it.

[@remyKhuong]

😂😂😂😂

[@NUeB_RCFPV]

And it felt a bit like Autobahn, too... driving just straight ahead and not so many potholes.