Lasers on Floors and Walls | Does it Help?

[@alanaz4265]

I have a different brand one of these, that being said I use mine quite often on larger floors. Makes it very easy to square up a room. Before you ask, yes I install tile professionally. Been a contractor since 1982. Is it the be all end all? No but it is very helpful in certain situations.

[@Aaron86v]

Perfect timing, i was pretty disappointed that my new Milwaukee $300 laser couldn't do floors like this so i was looking at what was available but didn't see any top brands make this type of laser. Glad you made this, def looks handy for starting walls.

[@dannymuir5344]

after 43 years doing nothing but tile I come home and have to many beers and talk smack on you and Sal.I think you guys put out the best videos, and sometimes I learn something new.Keep it up KID!!!!!

[@LandbergTileTV]

Thanks brother 👊

[@islanddan4302]

If you do floor tile a laser square is a must have

[@coryystewart8863]

Would this work for metal roofing

[@brianwalter2334]

Wont the pins going through your wallboard compromise waterproofing?

[@Aaron86v]

You can patch it using the same type of methods, it's not a big deal.

[@virgilcostras9498]

Stupid question mate. Is so hard to fill holes when you put last tile?

[@Dave-Dink]

Getting ready to tile bathroom floor and will be using Ditra over plywood. Does the Schulter edging at the door threshold to the room go over or under the Ditra? Is it just set in thinset like the wall trim? Thanks

[@pouetance]

I think you can use this laser on Dewalt larger wet saw too.

[@LandbergTileTV]

I'll have to check that out

[@Cookie.x.monsterr]

TILERS!!!! Little tip I use a hot glue gun to glue my flat edge stabila levels onto the wall. Then when tiles dry I just pull off. 3 to 4 blobs. Hope this helps.

[@jorgegracia2656]

Whaaaaa

[@phillippettit2138]

Brilliant Thnx

[@markgonzalez8828]

I use a straight wooden plank. Like 2 x __ whatever amount is desired.. Put a few drops of thinset. And just adjust it to desired height.

[@Cookie.x.monsterr]

@@markgonzalez8828 I didn’t know they made straight wooden planks. I like the idea. Seems old skool to me. Not knocking it. I would say hot glue drys in seconds and with a level it’s super fast.

[@markgonzalez8828]

@@Cookie.x.monsterr just your regular pine . Sometimes a 2x4 . Depending on the weight of the tile. We just use our level to check the piece is straight. As long is straight and didn’t bend it works 😀 is it hard to get the glue of the straight edge? Or that’s exactly for that purpose?

[@lyonscultivars]

Inwant this but the safer looks to go faint very fast?

[@LandbergTileTV]

Good laser level

[@josephgraham1065]

I am thinking they should have made it with green lasers since they show up so much better.

[@daviddewey3785]

This and the Bosch laser pretty much disappears in a well lit area. Basically useless unless it's really dim in the area you are working.

[@Trucker-Belly]

You should have used it like most tile guys will and do use it. Most of the time you are tiling a room next to a wall. Doing it like that wont work bc the walls are in the way. Your video should have been about doing layout and squaring up the room and also why the back has a 45 degree angle.... still love you though!

[@LosmiPZS]

What's the purpose of this,every laser level has 2 lasers that form 90 degree angle?

[@bonnie.duncan]

you have links to everything BUT the dewalt laser square…what’s up with that?

[@tedmcdonald3377]

Love me some tile tool Tuesday 😎🛠️😎🛠️😎

[@creedbarnett4948]

It looks rugged and has beefy mounting options I haven't seen on other cheaper laser squares. Thanks for the review!

[@andymon6145]

It's a nice laser but but my tile leveling system gets in the way of the laser light.

[@gtakeifer]

* your tile hollowing system.

[@zme1936]

Nice i will get one for sure 😀 thanks for the upload

[@markgonzalez8828]

I want to see a green laser . Overall I think I just want it to double check my lines are square on the floor. Doing the 3-4-5 method is good but this laser would eliminate second guessing

[@palmerstile9379]

Idk, I feel like I can pop lines with my level than I can do lasers just my opinion, badass looking tool though! Great video man!

[@randy1john]

Be sure to let me know if you actually use this on the job.

[@myrdaal]

There are well-made 3-way green lasers, self-levelling, fro around $50, that are great for small -medium projects. This is a boat level with an extended line from the laser. And it needs to be ON the surface you want to tile, not projecting on to it..I'd never use this.

[@markgonzalez8828]

This might be just to get your floor square. Mark up the lines and chalk it down.

[@OleoKoong]

Maybe good for DIY

[@flipp308]

Awesome video as always. I am not a big fan of the red lasers. Outside of that neat tool. Thanks again for sharing your opinion and knowledge with us. “FLIP”

[@raenenava925]

Not level clips??? 😂😂😂😂

[@JesusLopez-gd4th]

👍

[@yamutha6157]

What is that back wall 😂

[@LandbergTileTV]

70 year old building/brick

[@Trucker-Belly]

It has three mounting holes? Damn, just like my girlfriend:). So what does this do that my $50 one doesnt do? I wouldn’t mind getting it but its basically a torpedo level so I would never rely on a torpedo level for anything bigger than a niche or curb. I guess the Dewalt fan boys will love it!!

[@phillippettit2138]

Hilarious

[@yamutha6157]

Also not collapsing the ridges fully in a demo.. come on man

[@LandbergTileTV]

video about a laser, I have dozens of proper ridge collapse and coverage

[@yamutha6157]

@@LandbergTileTV I know just teasing you know gotta lead by example always

[@РусланМакопух]

It's really useless tool, 3D level will help