Launch 11K Two Post Lift Demonstration

[@ricbarker4829]

When lifting trucks/SUVs, a lot safer to use U shaped pads that go up either side of the chassis rail. Can slip of a pad, can't slip out of a cradle.

[@samwise7240]

Where can I buy these at 🧐

[@restwetq]

I just purchased and installed this lift. I think it is a very well built lift.

[@GearheadOutlaw]

How is it holding up so far?

[@BackFire10mm]

What kind of Lincoln welder is that in the background?

[@RedlineStands]

It's a 250 amp TIG, non-water cooled. I also run a 250 amp Hobart MIG. I recommend them both. Lot of folks don't know it, but Miller, which is who makes my plasma cutter, and Hobart, are the same company.

[@dylan-nguyen]

3:57 total camera illusion looked like you were lifting from the side steps 😂

[@ginginthing]

What is the min req'd shop ceiling height for this unit? What is the integral footer dimensions under each post for new pour slabs?

[@RedlineStands]

This lift is adjustable to either 143” or 149” in height. So, depending on which setting you plan to use, we believe it’s a good idea to give yourself 2” of extra ceiling height. As for the concrete foundation, you’ll learn everything you need to know in the video in the link below. Thanks for your question Cliff. kzbin.info/www/bejne/pHSTk56ibtlnoac

[@dmitrypetrov9654]

Great job. Great theme. Questions: 1. What should I do if the power is turned off? 2.Where are the best points under the car, for lifting heavy cars?

[@RedlineStands]

1 - Get a generator or wait for the power to come back on 2 - Under the frame Thanks

[@chadoh311]

I have a quick question my shop is 27 feet from workbench to bay door. How far from the bay door would you put this hoist?

[@RedlineStands]

The longest vehicle you will feasibly ever lift is 22 ft. I'd probably put it right in the middle. That'll give you 2.5 feet on each end.

[@chadoh311]

Thanks for your time and help

[@paulcormier7036]

I do spray foam insulation in Canada I see you have 1/2 pound spray foam and how there is no background noise (outdoors) good sound proof & insulation cheers

[@fhatomibrahim6667]

Sir why my two post auto lift are very slowly moving up?

[@genecoppedge5972]

Is the redline automotive lift and the components manufactured in USA?

[@RedlineStands]

No sir. The Launch is an import. The Challenger CL10V3 we carry is "mostly" American made, but it's also a good bit more money.

[@genecoppedge5972]

@@RedlineStands , Thank you for the very quick response to my question.

[@spider2112]

@@genecoppedge5972 I love my challenger lift have had it for 9 months if this is just side note Challenger is owned by Snap On. If this lift is anywhere close to the challenger that is awesome!!

[@alynaja343]

hi does it matter where it was made. is it usa made. thank you

[@RedlineStands]

This lift is made in China. The closest thing I have to an American made machine is in this link below. It's "mostly" made in America. www.redlinestands.com/catalog/lifts-c-290/automotive-lifts-c-290_138/2-post-lifts-c-290_138_139/challenger-cl10v3-plus-10k-2-post-clearfloor-lift-ali-certified-p-966

[@alynaja343]

@@RedlineStands i appriciate your time. so how much is it delivered with no extra options just standard included feautures. how much for the challenger cl10v3

[@RedlineStands]

@@alynaja343 Here's the links with pricing. www.redlinestands.com/catalog/lifts-c-290/automotive-lifts-c-290_138/2-post-lifts-c-290_138_139/challenger-cl10v3-plus-10k-2-post-clearfloor-lift-ali-certified-p-966 www.redlinestands.com/catalog/lifts-c-290/automotive-lifts-c-290_138/2-post-lifts-c-290_138_139/launch-11k-asymmetric-2-post-clearfloor-lift-ali-certified-p-2424

[@victornaja7927]

@@RedlineStands hi I want the most door clearance between columns so is the challenger cl10v3 have more clearance than your launch lift

[@RedlineStands]

@@victornaja7927 Yes sir. The CL10V3 is really wide. Be advised there is about a 3 month wait right now to get one.

[@ctg288]

How is the lift doing 3 years later? I'm thinking about ordering this exact one.

[@RedlineStands]

No complaints. It's been a great machine

[@victornaja7927]

Very nice lift how tall is the actually lift.

[@RedlineStands]

It's adjustable from 143" to 149" All the specs can be found here www.redlinestands.com/catalog/lifts-c-290/automotive-lifts-c-290_138/2-post-car-truck-lifts-c-290_138_139/launch-11k-asymmetric-2-post-clearfloor-lift-ali-certified-p-2424

[@victornaja7927]

@@RedlineStands hi I have a 2007 dodge mega cab basically a 2500 pickup. Can a challenger cl10v3 or the launch 11k you have can it lift all the way up with out triggering the overhead safety bar. Or the truck mention needs the extra 2 feet lift. And can I buy these lift from you?

[@RedlineStands]

@@victornaja7927 Assuming your 2500 is the same as mine, I have no trouble lifting my truck all the way to the top, at which time it is still not high enough to contact the overhead bar, and my lift is standard height. If you need assistance with sales, please reach out to [e-mail] or 901-351-4764 ext 1 for a salesman. Thanks Victor.

[@victornaja7927]

@@RedlineStands im 5'7" you think I can stand n walk underneath with out hunching. Still working on the same 2500 dodge. it means a lot you help because it's long commitment n it's alot of money so if you help me with this info I think enough to make up my mind . Thank you

[@RedlineStands]

@@victornaja7927 You'll be fine. If you were 6' 4" or something like that I'd be concerned. I'm 5' 9" and I have no issues.

[@domingoarriola9362]

How much does it cost?

[@RedlineStands]

Here's the link sir. www.redlinestands.com/catalog/lifts-c-290/automotive-lifts-c-290_138/2-post-car-truck-lifts-c-290_138_139/launch-11k-asymmetric-2-post-clearfloor-lift-ali-certified-p-2424

[@MechInvent]

This looks like a quality lift. Question though, I have 11feet wall to wall. Can I shorten or move anything to get it to fit?

[@MechInvent]

It looks like that safety lock is the thing you have to rebuild. Am I right?

[@RedlineStands]

Can it be done? Yes. Is it easy? No. Call us if you need to discuss

[@marksutton9291]

Hi, Where is the vehicle lift manufactured?

[@dustingilmore2710]

High Mark, this particular machine is manufactured in China. If you're looking for American Made, I'd suggest the Challenger CL10V3 listed below. Thanks. www.redlinestands.com/catalog/lifts-c-290/automotive-lifts-c-290_138/2-post-lifts-c-290_138_139/challenger-cl10v3-plus-10k-2-post-clearfloor-lift-ali-certified-p-966

[@jeffboughton3865]

@@dustingilmore2710 Look up the Rotary 12,000 lb lift

[@BackFire10mm]

Dustin Gilmore but the parts for the clv3 are form. You guessed it. China

[@sts.556]

installation available ?

[@RedlineStands]

We at Redline quit doing installations years ago. We never had an accident with one of the lifts we installed, but it just worried us that we were making $700 to install a lift, but risking $700,000 if something went wrong. The risk just didn't justify the reward. Sorry.

[@jonathanlucenas3299]

How to order give some details thanks

[@RedlineStands]

Here's the link sir. www.redlinestands.com/catalog/lifts-c-290/automotive-lifts-c-290_138/2-post-lifts-c-290_138_139/launch-11k-asymmetric-2-post-clearfloor-lift-ali-certified-p-2424

[@matthewlidel4324]

Is that lift 12 or 14 foot tall

[@RedlineStands]

About 12 ft

[@trusso2614]

Awsome unit, I'm in the process of hopefully getting a lift, saw your vids and like this one...you should do a "how to" video, on how to line up the arms. Of course you have to put the non verbal disclosure, "stupidity is not covered" in there as well. May be helpful how to balance the vehicle CORRECTLY

[@RedlineStands]

Honestly, getting the vehicle balanced is all feel. I like to center cars between the towers and load pickups so the front of the truck is more toward the center of the lift. Lastly, if I have any concerns at all I like to manually try to lift each end of the vehicle. If one end feels light-weight at all, that tells me everything I need to know.

[@kennethcallahan7410]

Where can I get pricing and installation info at please

[@RedlineStands]

Pricing is here www.redlinestands.com/catalog/lifts-c-290/automotive-lifts-c-290_138/2-post-lifts-c-290_138_139/launch-11k-asymmetric-2-post-clearfloor-lift-ali-certified-p-2424 We don't do installs. Sorry