50s kid has lost so much weight he should be called 25s kid now. Looking good man! 👍👍
@mainacio89510 ай бұрын
Thank you for your time, I found the review very informative. As I'm a beginner in the field of system diagnosis, I have a specific purpose in mind for this device - to assess cars before making a purchase. I would greatly value hearing about your experiences in using it for this particular need.
@ShaheehAlJazeerra10 ай бұрын
REALLY IT VERY HELPFUL AND WE HOPE LEARN MORE SPECILLY ABOUT AUTOMATIC TRANSMISSION SOLENIDE FAULTS AND HOW TO CHECK THEM WITH LAUNCH SCANNER OR WHICH FUNCTION TO BE USED TO TRACING THE FAULT CODES OF TCM THANKS .
@MrClarck1002 жыл бұрын
That's a great video, finally a proper review of the Launch. Maybe it's a thought to get the key programmer and try it out. I have a Chinese scanner that does most things but it's not as advanced as the Launch. I really need to get my hands on one of these.
@jhncvngh2 жыл бұрын
Thank you Mr Jason we are love you so much
@djautomotive87382 жыл бұрын
I upgraded my launch diagun to this x431 because lot's are not supported from diagun and i'm dispointed because diagun and x431 are same function and they telling x431 is upgraded software but it's not. Mostly lot's of my diagnostic experience are disapointing from this scantool. Powerfull when supported.
@williamh.hutchinson285810 ай бұрын
Can someone tell me if it's possible to reset the codes in the Mini Cooper footwell module with this scanner?
@faustogonzalez8397 Жыл бұрын
Thanks for your video !!
@WV591 Жыл бұрын
good review TU. they can skip all other plugs and lower the price few hundread. I doubt if anybody has ever used any of them.
@DzevatS11 ай бұрын
How is the customer support since it's an international model that's not supported by Launch USA?
@Gary_in_NoVA10 ай бұрын
Exactly. This is the only reason I haven’t bought it yet.
@MrYourfavoritesub2 жыл бұрын
You are a national treasure.
@brucebratschi43002 жыл бұрын
I purchased one but before actually using it attempted to talk to someone in tech support. I could not find anyone to talk to and for warranty you have to send it to China. I sent it back for those reasons.
@supersabrosinho2 жыл бұрын
This comment is amazingly helpful. I'm not sending a 2k+ tool overseas in the middle of a job. Thank you!
@noctambule90322 жыл бұрын
How is this comment not highlighted for others to see? This is very useful information that could easily make or break getting this scanner. Halfway into this video I was sold on this scanner, but after reading this comment I’m moving on to something else. I’m not okay with having to ship my scanner overseas if it ever decided to act up. A product is only as good as it’s warranty and customer support.
@wesleyashton98132 жыл бұрын
Could use one of these at home but may be too expensive just for occasional self repair use
@gutrali2 жыл бұрын
I just checked pricing ... $2500 including all the universal cables. Why would we ever care about this device
@edflores10152 жыл бұрын
Could you program with this like abs modules programming to the vehicles vin and other programming?
@cainarnold12 жыл бұрын
I know this comes with no tech support but when it comes time to having to redo the update where do you get the updates from? I know it's not from launch Tech USA
@josemarialopez853811 ай бұрын
Great vids, keep em coming. Q? Can i code an e53 abs module just w the launch scanner?
@psychocrys Жыл бұрын
Great video ❤
@utahyork33382 жыл бұрын
I'm not great at diagnosing problems, but if you tell me the problem I can usually fix it. These scan tools are very handy in finding out the problem, but pricing is a little too steep for me. It would be nice to see something as functional in the $200-$400 range. Maybe future technology will bring pricing down a little more for us home DIY'ers.
@gutrali2 жыл бұрын
Yeah, the pricing usually forces home DIY'ers to google the "other" software options usually available for older makes/models. For example the e46 BMW has several software packages and cables available. Not one of them is over like 60$. There is nothing you can't program yourself... from a new key to removing the dead area in the center of the temp gauge. This is one major reason I dont want to buy a new car. Who wants to be locked out of all the internals of their new investment? Yuck
@92BGLancer2 жыл бұрын
Get an autel mx808. They're good and will read all modules. They're around 400 dollars not too expensive.
@jeffcurrie123 Жыл бұрын
There is a launch device I think it's the c919 for like 400 has great reviews. I'm not sure about he features
@adriannyasia2 жыл бұрын
Nice! I just picked this tool up and had an issue with a vehicle I was diagnosing a few days ago. I called Launch, gave them my S\N and found out that this particular Launch is not recognized by Launch tech USA. I mean, it's an authentic Launch tool, but it's a "global Launch" according to the operator. I was wondering why some American cars keep coming up as import. Is your unit a global spec as well..? I'm curious. Hope I didn't get duped! Smh
@philipshaw94852 жыл бұрын
Yes you got duped , you have pobably got it from ebay, the add may have even had your nations flag placed in it. Bad news! the warranty isn't worth the paper it's printed on. Try to email these bandits after youve made the mistake of downloading there counterfeit updates and it loads a multitude of permenant ghost faults into the vehicles ecu
@CJ.A-C2 жыл бұрын
just stop buying launch easy
@PCMB4LyFE2 жыл бұрын
Looking good 5K
@torqenv812 Жыл бұрын
The subscription fees every 2 year are insane
@abduhlrivers452 жыл бұрын
The first time I put it to my f10 intelligent diagnosis worked great. But now after updates it does not find the vin automatically anymore
@jamesmetz51472 жыл бұрын
The cost on the things that need to be added and the yearly cost could get too be a problem. Do you have any incites along those lines. That may make another video.
@dieseldawg71322 жыл бұрын
I made a video the amount you have to pay to get special functions is ridiculous
@rydevip3678 Жыл бұрын
I just bought 1
@OldboyWOW7 ай бұрын
CAn you see the injectors mgr and etc? Cuz i didnt saw that option in your video. And i have thinkdiag which doesnt show injectors live data to all actors, only to certain
@moseskinoti-d6k8 күн бұрын
Hey Bro need help, looking for a tool that's able to change the language on navigation system for multiple cars
@G20-i2m2 жыл бұрын
Can you check the coils individually when the engine is running ?
@eap.productions2 ай бұрын
Turn each one off to see if engine runs any different.
@judeoliveresteron415 Жыл бұрын
Hi everyone. I need help on my Launch X-431 Pro 3S+ I bought this march 2022 and i just use it twise. i dnt see anymore the pictures the we use to diagnose the car you know the “ intelligent Diagnose”, Local Diag, Service Function etc. i dnt see it no more in my tablet screen. Hopefully you can help me with this. Thanks
@psychocrys Жыл бұрын
Reinstall the software and firmware update
@psychocrys Жыл бұрын
kzbin.info/www/bejne/e3-5i4WfnLKCjdU
@psychocrys Жыл бұрын
Link below walks you through reinstall for your launch scan tool
@codymcbee5642 Жыл бұрын
Hey squid did the launch tablet allow you to reregister the new seat heater thanks cody
@antonispk67604 ай бұрын
Can you restore a corrupted frm with launch xprog3?
@nattan32269 ай бұрын
will this work on heavy equipment construction machineries?
@sebczajna700 Жыл бұрын
Which difference its vs. Topdon or Thinktool? Thats the same tool?
@lloyddecker29657 ай бұрын
love your video very Indepth like to ask u if this scanner can do a vin rewrite have older charger the ecu go's bad and have to have a locksmith rewrite my vin in the new used pcm like to just do it my self if this x431 does a vin rewrite
@burntnougat53412 жыл бұрын
After bad experience with a Foxwell scanner, I'm kinda suspect about adequate software support for these Chinese all in one scanners. Pasoft suffices for E46 for me
@jankof762 жыл бұрын
Yeah, foxwell really didn't do it for me either
@SMOKEY-JAYS-DIESEL2 жыл бұрын
Xtool D9 pro is better than this one for sure!! I know this because I had the same launch that you are using I also did a review not very good and send it back and got the Xtool D9 pro which is way better
@dewaynepotts7081 Жыл бұрын
Will this tool disable the auto shutdown that new cars does after 30 minor running
@joseleite7729 Жыл бұрын
can you reprogram clusters? for example chevy traverse Clusters fail
@psychocrys Жыл бұрын
I have this x431 pro3 elite and the xprog programming tools I like the easy navigation use and range of vehicles.. my Intelligent Diagnostics vin link works with all the bmws so far new updates fixed it for most autos euro and American all but Saturn's lol the malfunction king of cars😂
@cesarjorgemurillobarientos18132 жыл бұрын
Nice
@MrClarck1002 жыл бұрын
Do you know if this scanner can do online programming, say if you change a DME or a CAS module to program it back into the car?
@mariaevepate2460 Жыл бұрын
Good day everyone I tried diagnosing Benz c250 2003 with my Launch X-431 Pro 3S+ but I couldn’t find the (benz38) connector location Can someone please help me ??
@karzanmahmud41688 ай бұрын
This standard value in eobd is true ???
@ackpelon Жыл бұрын
How or where to call for buying updates for this scanner ?
@Александр8122 жыл бұрын
Привет ! 😀 Эта версия лаунча может делать онлайн и офлайн кодирование ? Какая версия лучше , глобал или евро ? Есть у версий разница ?
@theone95642 жыл бұрын
Would this be exactly like the x431 diagun?
@bryangeronimo55242 жыл бұрын
So about the tpms does it come with that extra tool??? Thanks and great video
@Carlitosway211 Жыл бұрын
No
@izack3672 жыл бұрын
does this supports coding such as injector coding abs and all the easy stuff?
@psychocrys Жыл бұрын
Yes
@FEAdeES Жыл бұрын
Hey, im wondering if this scanner works for 2012 ram 5500? Specifically chaning the PTO settings from stationary to mobile
@Владимир-р4з Жыл бұрын
Здравствуйте, подскажите какой лаунч полноценно подойдет для диагностики, кодирования программирования автомобилей мерседес w220 s 320? для себя и работы на сто спасибо заранее
@dayntubee2 жыл бұрын
How does this scanner compare to think tool pro3? Better or same?
@kingbolen_official2 жыл бұрын
Both work similar but Launch x431 has the open system that you can stall app or access google on the device.
@martinidoyle Жыл бұрын
This scanner is better then ista
@CHIBA280CRV7 ай бұрын
Dude change the settings on the top right from Metric to English..it will change the values. 😂it’s better to know what you are trying to show and tell before doing so.😊
@rohitchaudhary732 жыл бұрын
Hello sir very good information scanner price
@VaporGearhead11 ай бұрын
No support for the tool in the USA.
@josewhodat4488 Жыл бұрын
Can anyone confirm if this is the same V7.0?
@joshgreenwood132 жыл бұрын
Can this code air suspension on f01/f02?
@garyjay1774 Жыл бұрын
With Respect you are wrong.. You illustrate the dangers of reviewing a device that you have just acquired and you have little or no hands on knowledge about its operation. This becomes the blind leading the blind. For instance you say: “for some reason ‘intelligent diagnosis’ does not work on BMWs, so I’ll skip that”. Why? This is important. As someone who accepted these early reviews and bought a Launch scanner over two years ago, I can assure you that it was my major mistake. Launch works ok on some vehicles, but often cannot complete functions on the most common models. Requested updates take weeks or months to arrive, or are completely ignored. Currently, my two year subscription has expired, so I have to use ‘Local Diagnosis’ to address the installed files and updates that I HAVE PAID FOR. Now Launch org. inform me that Local Diagnosis will cease to function if I do not log-in within 30 days, or pay $800 for another two years of substandard files and updates. I OWN A BRICK!
@psychocrys Жыл бұрын
Never had any problems and support has been interactive and feedback has been timely when requested... they even provided full training courses for xprog too. Sorry your experience hasn't been as good perhaps your critique helped launch fix errors with the scan tools operation in the last 2 yrs...
@psychocrys Жыл бұрын
Intelligent Diagnosis vin#decoder has worked well with most auto but not so good with Saturn's 2000-2010???
@irneskajtezovic2357 Жыл бұрын
Hy im intersted how to know if code is new or old ...let say fixed but not deleted?and how you can look for codes and pending codes?and does these scaner have lm test?thank you
@psychocrys Жыл бұрын
It will identify dtc as stored, current, or History
@ولدزايد-ذ2غ3 ай бұрын
Its imposible the pressure is 500+ psi
@oeh7819 Жыл бұрын
How to change the mileage with the tablet thank you
@Gary_in_NoVA10 ай бұрын
lol. Not today, Mr. EPA/DOT man.
@gimisandov Жыл бұрын
key progamming and ecu. reset to all vehicles. like thtottle.
@kurdish7141 Жыл бұрын
Please tell me can this scan tool work on bmw e30 and e32 ? Support the models or no and thanks
@kingbolen_official Жыл бұрын
What's the year number?
@gerryr1893 Жыл бұрын
Will this access Range Rover l320 ccf
@orashoburke8059 Жыл бұрын
Bless its a great video it is helpful
@alchemy1 Жыл бұрын
Odd. Didn't see Infinit.
@fernandohood55422 жыл бұрын
Coding? Not a fan of the graphics and fonts.
@psychocrys Жыл бұрын
They are able to be personalized in tablet settings
@samlopez22562 жыл бұрын
Hello... What about the xtool d8 ? Any good ?
@gimisandov Жыл бұрын
hello
@Edwardrae12342 жыл бұрын
so what can you do with this that you can't do with inpa and a laptop.
@50sKid2 жыл бұрын
About 100 other car makes and models
@philipshaw94852 жыл бұрын
Launch sell chinese units whhich are not covered by any warranty allthough they claim to. When you download there Counterfeit upgrades and your vehicle then stores permanent faults in it's ECM's and launch tell you that your unit is not covered under warranty because it's a chinese unit, even though there all chinese units you will then realise that youve been robbed. BUY ANY PRODUCT FROM LAUNCH AT YOUR PERIL!!!!
@randonnaidoo25922 жыл бұрын
🤣 Cars became so electronic now days they shud all go electrical all the way, mechanical has lost out here #JusticeForMechanics!
@FAMILYBDYOUTUBE2 жыл бұрын
please price in Bangladesh
@supersabrosinho Жыл бұрын
No
@raywalsh582210 ай бұрын
no topology
@Gary_in_NoVA10 ай бұрын
Are you sure? Thought it did.
@rockynix7731 Жыл бұрын
I'm not pleased with this tool at all ... Been a machanic for years . The tool of my choice is the .. Think tool Pb8 .... For 800 dollars well worth the money ...
@godofthunder6613 Жыл бұрын
May I ask why you prefer the Think tool over the launch? Think tool, Topdon, Matco, and some other scanners all run the same Launch software
@@rockynix7731 can you be a bit more specific? What can the Think tool do that the launch can't?
@brainfleming87562 жыл бұрын
Quite disappointing that you did not even touch Coding/Programming.
@gutrali2 жыл бұрын
He just had to get the review out ASAP to appease the gift givers
@50sKid2 жыл бұрын
No, I purposely avoided it because it isn’t geared toward coding and doesn’t support anything really useful. I’ll see if I can get protools and do a video on that. I need to find an android phone though