Why Does Your Speed Queen or Huebsch BC2 Control Washer Not Work?

[@nayelifigueroa7094]

My machine won’t spin . Everything else works great. Also this video is awesome a lot of useful information!! Thx

[@tonysgarage2955]

I been having problems with the final spin on a 30lbs washer it washes spins in between cycles but it won't do the final spin or will spin for 1 minute instead of the last 5 minutes and I try everything I can think of and don't know what else to do

[@khummel7862]

Great industry knowledge thanks for the help

[@DamienMoss-yz2yn]

I put new accumulators boards in our 3 t300 washers after the debtor service guy said that was the problem but put them in and the threes washer still dint advance to the ststart cycle after machine final spinout what could I check need I thatught its odd it happenedtoc3 machinist the same time

[@DamienMoss-yz2yn]

Drain valve won’t close new

[@user-df1dr1xw6k]

I have questions about the 30lb Speed Queen commercial washer. The door is not opening. There's an open cane light that that comes up, I don't know what that means. Please, if you can tell me which part needs to be replaced, I would really appreciate it.

[@sergiohidalgodelcastillo2805]

Hi, I'm from Peru, I wanted to know if you could help me eliminate the coin system from those washing machines, since I bought 10 of those units and they all came with a coin system, I would be grateful if you could help me, I'm a follower of yours, I watch your videos a lot, regards

[@jessedeltoro6088]

Hello question my machine won’t spin but it doing all the cicles on the board and I can see the knob turning and I can hear the clicking what can it be ?

[@ilovetotraveltheworld]

I have a question to throw out to anyone with knowledge of working on these machines. I am looking at a used 25lb industrial huebsch washer. I would like to install it in my basement but I'm not sure I can really do this. My two concerns(maybe you can point out some more I should be thinking of) are how I will accommodate the drain and if I can fit it in my basement. Does anyone know if the frame can be disassembled on these or is it a solid frame that you can't take apart. The width of my basement door is 30" but the dimensions of the machine are 34x34x54. Thanks in advance for any answers.

[@doganhouston5201]

THANKS FOR MANY HELP😶

[@luiscolmenares575]

Hello, very good explanation. In the 4-basket washing machine, on the back of the lock assembly there is hanging a small rectangular-shaped piece that looks like a sensor, could you tell me what it is for and where it is placed. I will thank you for your answer. The machine is stopped by mistake. E DL I have squared the door and checked the switches and everything, but the error persists. Thank you

[@andresacunasalinas4234]

Tengo un problema en una tarjeta de una lavadora digital speed Queen son igual a esas que está mostrando.. el problema es que nada más hace una función y no pasa del 19 y se estanca en ese número

[@khamisalkhusiabi2678]

I didn't wrong wring Connection for the Drain Valve for huebsch washer machine and the display now not working. So what will be the damage now?

[@HanPro]

most likely the fuse on the outlut board blew up. change it

[@ilovetotraveltheworld]

The Model is HX325161012T, and the serial number is F 9407000282 (if I understand correctly this means in was made in July of 1994). I couldn't find any info on google with the model number. It is a Huebsch Originators.

[@roxanac2502]

I need help .. my machine works one min and doesn’t the next .. I’ve checked the diaphragms and the pump and hose... can you please guide me

[@doganhouston5201]

I have model HCN030KCFXU3001 machine motor turn right but not turn left after Ed08 code come you have any idea please

[@HanPro]

maybe the contactor went out, you can test it like he does in the video if it is not it, then, i think it is the output board itself but not 100% sure.,, before anything, check the wirings on the contactors, I once took weeks to figure it out. one of the wires looked flush but when I took a closer look, it was barely making contact with the screw in part of the contactor.

[@monherdeneuhnaa8575]

FLE