031 Top 5 Reasons Why Your Speed Queen or Huebsch Dryer Won't Work

If your coin operated Speed Queen or Huebsch Dryer doesn't work, watch this short video to figure out the problem. Perfect for Laundromat owners to troubleshoot installation problems or heating problems. Looking for Parts , Supplies, or Equipment for your Coin Laundry / Laundromat / Dry Cleaner ?
Check us out at www.lowlaundry.com !
Just some of the Popular Brands we can help you with - ADC (American Dryer Corp), Alliance Laundry Systems, B&C Technologies, Braun, Chicago, Cissel, Continental, Dexter, Electrolux, ESD, Forenta, GE (General Electric), Greenwald, Huebsch, Ipso, Kenmore, Maytag, Milnor, Monarch, Primus, Speed Queen, Unimac, Wascomat, Whirlpool
We also sell tons of supplies like coin changers, bill breakers, water heaters, laundry bags, vending / vended soap, shirt hangers, poly bag, laundry wire carts, poly trucks, vinyl trucks, scales, signs, folding tables, seating, benches, card systems and more. Some of our supply brands consist of R&B Wire, Vend Rite MFG, P&G, Rinnai, CCI, Spyder Wash.
#laundry #laundromat #coinlaundry
Our Website Direct Linklowlaundry.com/

[@yazzirmontejo4414]

speed queen doesn't stop spinning only when i take it off let it unplug. It is double, one below or another above, thank you very much in advance

[@satishbhaibhakta1269]

My huebsch dryer will fire up for about a minute then shuts up n wouldn't fire again

[@robgrant1353]

How about the drum stopped turning. Does this unit have a belt drive system or direct from the motor model I have is HT050N

[@AlexVargas-i8z]

I have one that is warming me up too much and it almost burned my clothes.

[@sarunvong]

Why the flame burn to short than normal time?

[@bchong1688]

Hi, My top STT30N stackable tumbler constantly fire up for a minute and then no fire after a minute. After a minute it fire up again and continuing doing it. What seems to be the problem?

[@SoullessProductions]

I'm getting 120 and 240 should I be concerned?

[@DavidTerry-g1w]

FYI, I had a problem with no heat and found that the centrifugal switch on the blower motor was not making good contact not completing the circuit for calling for heat.

[@robertmurray23]

Our top machine won't start. Bottomworks fine... Motor spins with or without belt for 1-3 seconds and then stops. Tried another good motor and it does the same thing. Voltage to the machine is good. Any ideas?

[@MrSolar.]

Hello, I have speed queen st 30"s The top and bottom unit both will start and ignite the fire but when the igniter stops the fire goes out 3 seconds after. I swapped all sensors, relay, igniter box, solenoid coils on gas valve and get same result. Checked both thermosters are reading 0 ohms. I also opened both exhaust ports on top and bottom in case of a clogged exhaust clog's. Confirmed the air flap is being drawn closed and verified the switch is good. Any idea?

[@stephanieteague6381]

It lights and then shuts off after about 10 seconds.... help.

[@joeseelig2385]

I keep blowing blower fans every 1-2 years. Is this normal or could it be an issue with machine running too hot

[@juanrivas1273]

Working as 2 hotels in Panguith Utah. Your Video its great .. Every time dryers fail. Your info saves the day. Thanks.

[@ejohnson3818]

Blower motor is not coming on. Dryer runs but no fire. What can I check?

[@ivanrosas8977]

Thank you very much for the video. It is very helpfull.

[@HanPro]

on my case, after replacing the blower I found this part broken. M414704 Thermistor. I think I broke when I vacuumed the inside compartment. I don't think it is in this video. almost the same dryers.

[@josephalvarez5303]

hello man hope you doing great, I would like to know if theres a way to bypass the dryers, Iam ussing the model ST0300DFG, exactly the same model as the video. I want to bypass the coin drop since Ive got the dryers at home getting me in trouble with the coins.

[@jaimercalderon4527]

I have the SH error code I check all thermistors all good what alse could be wrong?

[@romelvillegas2840]

Hi good morning I romel I from México , this vídeo is exelent, I have one machine disayme for repair this drye si not hot heating, I see in this vídeo who repair I thingso is the fusibles or teostat Exelent vídeo

[@anthonygoss8415]

Wow! I have a group of 5, 2006 STO300DRG stacks. I'm just beginning the task of replacing gas valves. Have you had to at anytime replace gas valves? I replaced rear components and still came up with intermittent heating conditions. This group of dryers ar the oldest of 16 stacks....

[@nismail66]

Need repair guy in Tampa Florida, if someone can help me

[@codyharris3741]

I have a speedqueen st035n and it has a code ed5 td 58 error code what does it mean as the machine didn’t come with a manual with codes

[@ironcruzer747]

I appreciate your sharing these troubleshooting tips.

[@erickmartinez3571]

My dryer is not getting hot

[@roxanac2502]

What about the ether new cable ?

[@ritch90]

Hi really need your help bro. Im setting a mew laundromat. Im buying a stacker (dryer on top amd washer on bottom). Do they have flaw or is it better to seperate them?

[@laundryownerswarehouse7016]

Call the office and ask for Andy, 954-537-1643. He’s happy to help you with you!

[@oscarxique4594]

Hey man what’s your thoughts on the new gen 7 wascomat washers ? I might soon upgrade my store but looking into more options. Would really like your output on the new equipment coming out. Thanks. For all your vids !!

[@Ihategobblegum]

Trash

[@sboyd7551]

Being trying to trouble shoot no heat problem, all the above mentioned have been checked. I'm having intermittent heat, sometimes heat, and sometimes no heat

[@anthonygoss8415]

What is the make, model and year of your dryer?

[@agimjusufi6850]

check relay or just replace it and see if that takes care of problem. Sometimes, relay contacts don't sit properly