Transforming A John Deere 4020

[@rogerglasco5941]

First time watching this wonderful video. As a teenager, I was brought up on the John Deere 4020. We had 2 of them and they were brand new. My brother had one and I had the other. My dad showed us how to use them in the field. My brother had a 5 bottom plow and I would follow him with a tandome disk. Some of the best years of my life. John Deere will always have a special place in my heart.

[@daviddill4314]

Good to see you jump right in and "Get er done". Always pay attention to the old timers as their knowledge is not replaceable. Be thankful you have someone like him to ask questions. Keep up the good videos and looking forward the next one.

[@lordchaa1598]

Great advice, I lost my grandfather last year. The loss was far greater then just losing a beloved family member. We also lost his encyclopedia like knowledge on all his equipment and systems he set up to minimize manual labor. I’m grateful for everything he taught me over the years and I can only hope I can live up to his expectations and keep his dream alive and well.

[@heshy14]

The 4020 revolutionized the brand. Many new features made it a classic. I would love one

[@barryc2253]

Back in the mid 1960’s when I was about 10 I started helping my next door neighbor who had a small farm in Massachusetts. He had a 1929 Ford tractor that had steel wheels on the rear. Once or twice a year we would take out the tractor which had a 36 inch saw blade on the front and cut dry, split firewood into either 12 inch or 16 inch sections. Watching you and Grant working on old equipment brings back fond memories.

[@robmorgan9337]

Laura, impressed with your determination and desire to learn. Keep up the good work. Just a quick tip….you’ll get more lifting capacity for your box blade if you install the lift cylinder with the rod (shaft) end pointing up. This is due to the differences in the surface area of the piston caused by the area of the shaft side being smaller than the other side. Example (simplified): if hydraulic pressure = 1000 psi; cylinder diameter = 2 inches; shaft diameter = 1 inch. The 2 inch diameter end will exert approximately 3140 pounds of force when 1000 psi hydraulic is applied. The 1 inch shaft end will exert approximately 790 pounds of force when 1000 psi is applied. That may make a difference in the operation of the box blade. God bless and stay safe!

[@ikesrepair7565]

But what motion is created by those forces? Higher force extends the shaft (lifts the box blade) and lower force retracts the shaft (lowers the box blade). The shaft being up or down on the box blade makes no difference in operation.

[@jmit5650]

The 4020 with a roll bar, fenders and a canopy is one sharp tractor. I used to run a 4020 pulling a five bottom plow and a 3020 pulling a four bottom plow. Showing my age. Great video.

[@wayner806]

We had a 4020 LP and it was 3rd gear for a 4 bottom and not many acres in a day. It wasn’t near as much HP as the diesels but dad is still using it today.

[@jmit5650]

We were plowing sandy sandy river bottom ground. Not hard pulling at all.

[@wayner806]

@@jmit5650 Ahh! Thanks for the update. I remember running that tractor and breaking plow on 1/2 mile rounds and at the end of the day it felt like you could spit across what you turned under that day! Laura and Grant’s 4020 sounded good when it started. Lots of memories of home for me. Have a good day.

[@jmit5650]

Good memories.

[@brentkelsay3439]

Dad had a 1966 Ford 4000 pulling 3-14s, a good old tractor. But my uncle had a 3020 with a 4 bottom plow and an AM radio bolted to the fender. The hot setup for a teenage boy!

[@RalphBellairs]

Always nice to see Pepper supervising the renovation work!😸

[@deepsubmergence9357]

4020 was one of the best, versatile tractors that ever rolled off of the assembly line.

[@jerrybauman6927]

I spent many many hours on a JD 4020 in the late 60's working for my uncle in North Dakota. What good memories. No cab but had a fender mounted am radio. I'm hard of hearing in my right ear from leaning over the speaker listening over the drone of the diesel, but would not change that for anything. Loved that time in my life.

[@jvin248]

Really like this series of bringing old equipment back to work. When all the stores are out of DEF you'll still be able to get work done! And no banker chasing your loan payments (that's the best part).

[@BruceBergman]

Get a supply of oil, air, and other filters and consumables. Spray lubricant on the 3 point adjustment screws and pivot points. And sometimes you need to remove the cab for working on it. 5:25

[@Rob89139]

I really love watching old equipment being brought back to life. Hope to see you doing more like this

[@lindanelson8400]

I agree 👍 the Welkers are pulling stuff out of the tree line all the time, turning it into something useful. The recent one is a Ford diesel truck made out of four trucks into one. Pretty resourceful.

[@KeithSizemore]

Same

[@MB93WP]

I think it’s a waste of time but she has the money to waste

[@PaulDemmin]

Loving watching you make old equipment workable again. I have been watching and following you guys for some time now and I really enjoy your videos. I am 61 years old but I grew up on a small family farm in western New York and spent many many summer days looking at the hood of a 4010 diesel and winters also as we used it for snow plowing. Watching you with this 4020 brings back so many memories. Keep up the great work. *Just a small note to Laura, Your Hand is Not a Hammer!!! Please use one.

[@LostButMakingGoodTime]

A lifetime JD fan… the 4020 may be my favorite. Especially with the full fenders with the quad headlights underneath. Takes me right to my childhood. If I had the means to have a collectible tractor, it would be tough to pick just one, but the 4020 would be at the top of the list. I would live for parades! 😁

[@larrycase2762]

In the 60s, my grandfather had a JD4010 and a 4020. In the summer when I was visiting the farm, I would help, very little, to attach an 2 row cotton picker to the 4020. That was really something special as before that it was hand picked. Good memories.

[@patrick-mccabe]

Grew up on WI farm (live AZ now), and even when had other big big green toys, had a 4020 and 3010 that became farm utility tractors. Both rebuilt a number of times. Lots of fond memories, from raking hay to moving wagons on farm yard. Thought you'd likely remove the aftermarket cab and loader. We did have a JD loader on our 4020 for period of time, eventually removing it when had larger tractor with loader. Will enjoy watching the 4020 be restored. Hope you go full distance of engine, hydraulics, paint, and JD sign badge.

[@donwilliams3626]

Laura, you are a real inspiration to other young people. Leading by example, "this ratchet paid my way through college". Just think once upon a time this tractor was the " WORKHORSE of its fields!

[@corona123ify]

Laura and Grant what a great post, and that 4020 is a beauty. Watching you all working on that tractor brought back memories of growing up on a dairy farm in Wis. and all the fixing we had to do on tractors and other equipment. At one time my dad and I were working on tractor, I was under the holding a wrench while my dad was trying to loosen a bolt and a shard of metal fell into my eye. To make a long story short I ended up with a lot of pain and eye an infection that took a couple of months to resolve and heal. Looking like a Pirate in high school was not cool! My point is that you, or anyone working on a farm must always be safety conscious from thinking about safety risks in that tasks at hand. Think about loose clothing, safety glasses, gloves and footwear. As a big from the beginning of Laura Farms I have encouraged many to subscribe.

[@corona123ify]

Telegram???

[@jls1045]

Great buy on the 4020. It cleaned up nice! I drove a 4020 diesel (no cab) back in the 60's. Loved that tractor! Watching this video brought back a lot of memories. Thanks for another great video.😊❤

[@beastmode_bumblebee]

Me and my dad just went through and fully repainted our 4000. It had already been rebuild mechanically after a fire and it looks great now. It was a lot of fun too

[@orangecrush315]

Great call on removing that loader! The tractor is beautiful! Such a classic! 💚💛 Can't wait to see what y'all do with it from here!

[@richbowser9500]

great idea scrapping the cab and loader, fenders will make it a perfect light duty tractor on the farm. i remember when those tractors were new and everybody was amazed at how big they were , times change.

[@SpatialDragon]

I remember when my Dad put the first cab on one of our tractors, it came off a new Ford Bronco, it was 1968. We were so happy to have some cover, Dad spent 18 hours days during plowing and planting then harvest. We had 500 acres and our tractors were all small like that one. Lot of childhood memories there.

[@rodlappin6147]

Grew up driving a 4020 Diesel, you will start finding 3rd or 5th as your go to gear pretty soon. Can't wait to see it all cleaned up and put to work.

[@imthewolf1]

I remember working for John Deere when I was an apprentice and the 4020 was one of my fav tractors to work on. I have done everything on them. I have to say they are a great tractor to have on a farm.

[@collincolston8443]

This 4020 brings back a lot of old memories. When I was 18 & 19 I worked on a big ranch just outside my hometown. I put many a mile on this tractor mowing pastures.

[@keenanmcclure1038]

We have a 4020 that my Grandfather bought new. It is now kept inside and used occasionally. These are great tractors and still very useful. We have some friends that have these and still use them as well. Thank you for the great content!

[@CarlFechner]

I really enjoy your videos very much Laura. You have a good sense of humor and your Beautiful smile 😁 is refreshing. Keep on smiling young lady ♥️.

[@mikecliff2367]

Laura. There is still a special John Deere program that will sell you the rollbar for that Tractor at cost. Would be in the neighborhood of less than $1500. It comes as a complete kit to be a folding rollbar for that Tractor. It is a safety program and you get just the rollbar through the Deere dealer. I got one and put it on my 1976 Deere 2040.

[@marvinschabacker4207]

I put one on my 4020. Definitely feel safer.

[@mikecliff2367]

There is also a special program that pays a percentage for the ROPS. It is called ROPS 4 You ... The official name is: National ROPS Rebate Program and it is also part of "National Tractor Safety Coalition".

[@ramshackleshack751]

For the power beyond for the loader i got mine from that line on the other end under the rockshaft cover. Its alot cleaner. Even if you dont put a loader on it you can mount the loader valve next to the seat on the right side for more outlets.

[@martys5435]

I spent many an hour on one of those 4020's when I was a kid. Talk about bringing back good memories!! ❤️

[@WilliamCooper2005]

Love this! I don’t have any tractors made in the last 30 years, mainly because I can’t afford them but I also like the character and the ease of working on the old tractors.

[@jehdwebster9152]

I bought a 1965 4020D ten years ago I put a 148JD loader I put hearing pads on the trabs and engine, also heater on coolant . But when it got down to -16°F the fuel jelled with hay to feed a gas tractor would be nice. Love following your channel from NWMO.

[@ld5714]

Good morning Sunshine! You and Grant are very lucky to have access to that older gentleman and his extensive knowledge and experience. He will be invaluable to you and you are fortunate that he will be able to pass along much some of his knowledge to the next generation as that knowledge and experience is truly a national treasure. You made great progress on the tractor and I look forward to following the progress in upcoming vids. Have a great week and you guys be safe. Larry, Cental Valley, Ca.

[@billries7204]

I bought my 69 4020 about 25yrs ago at auction in January in ohio. Drove it home about 40 mile trip. Was i ever glad it had one of those cabs on it. Like yours the cab was the first thing to come off when made it home. Good luck with the old girl !!

[@rweisele]

Laura, there were 8,645 gas synchro-shifts made, 9,240 gas powershifts made, of course by far the most 4020s were diesel tractors. Good workhorses, and they took a beating, and stood up!

[@rmsatt1608]

We had a 4020 Propane tractor most of my life. If you don't know there is a grease zerk on the throwout bearing be sure to grease it because it's a pain to split the tractor just to replace that. The other weak spot are load shaft seals.

[@michaelwilliams7481]

You now have the tractor down to the bare bones. I am so amazed what you three can do. Love from Mike.

[@230e4]

The 4020 is a popular tractor, ran a few Diesel 4020's over the years but never a gas powered one. The box scraper and mower look real nice. Nice work! 👍

[@wayner806]

I grew up driving a 4020 LP. The tank was at very front and stuck at the top of the hood.

[@230e4]

@@wayner806 That's cool. My neighbor has a 1066 International LP with the raised hood like that.

[@wayner806]

@@230e4 Well that’s cool too! I never saw a 1066 LP. Thanks

[@ebla83]

I grew up with a 3020. Those old Deeres are fantastic machines. You will be happy with it!

[@blakegibson2654]

The standard 4020 equipment (3 point anyway was a Riper 3 or 4, Bottom plow. Offset disk, leveling disk, field cultivator. 2 or 4 tow lister & or bedder. & a 4 or 6 tow Lilliston Cultivator, scrape blade, bush hog. Planter, & two grains wagons, gravity. That’s was the average guys ensemble with a 4020. Interesting stuff on the used equipment your posting

[@JeffBaumgartner-pe7qq]

I ran 1066 hydro had the same exact cab only good thing about it had a heater so plowing snow was nice and that loader looks like it needs to be on a little 30 hp tractor spent a lot of time farming with a 4010 great tractor

[@bendugas8632]

First time seeing your channel, very interesting watched three videos in a row. From a retired fisherman to watching farm machinery and grain being sold thank you for sharing.

[@TomRowan777]

Yay Laura! What a fun challenging project! Looks like all this old girl needs is som tlc! I enjoy how y'all think things through out loud and invite us onlookers to understand the mechanics and the decisions you make based on common sense, safety concerns, and recycling materials into deer stands. This video was very well done and it's fun to follow along with you all. About 6 of my buddies have your hoodies and the new guy at work has reported back that his wife and 12 year old daughter are now hooked on Laura Farms! Thank you all for sharing your wonderful life with us. We ❤ You!

[@rhwall]

The 4020 was the first tractor I drove on my grandparents farm in NE Montana. I spent many hours summer fallowing in that non air conditioned cab, good memories.

[@dcsblessedbees]

I drove one of those as a kid on the farm. Great to see ya fixing it up.

[@stevevanvalkenburg5449]

When I was in high school, the John Deere 4020 and IH 806 were "king of the hill", the biggest and best tractors we used. Loved driving them. Now, they are just a small chore tractor compared to what we use every day.

[@ge3186]

Growing up our neighbor had a 4020 tricycle front, always loved that old thing as a kid

[@altonjames1677]

I agree with you about the chain hoist, it can be a very useful tool.

[@thomasknobbe4472]

Safety first! Take your time and figure out what leans on what and what holds up what and what attaches to what and you will figure it out. About 8,000 of these, 168,000 diesels. This is the tractor that converted our neighbors from red to green-they were that good. Looks pretty straight for a loader tractor. Good move to remove the cab, those things are noisy-took out a bit of my hearing on our 1968 4020 Diesel. From the sound of that idle, the carb kit is a good idea You will also want to source a battery box and then get the proper battery for it-much more secure than just sitting on a ledge. An extra hydraulic hookup is not very hard, either, and you will use it. Get yourself some fenders and you are old school John Deere cool!

[@kroadie3936]

Working on these projects is just so rewarding,Laura farms and team.

[@robertschauer376]

The 4020 looks so much better w/o the cab and the loader. Great Job!

[@monette44]

I'm coming from Rory's channel. Spent the morning enjoying your content. But... Not sure if OSA is watching but your chain hoist hook is well past it's expiry date... I'm not past safety squints and welding in Crocks... But... When the tip is on the hook is spread like that she's time for the recycler. cheers work safe please.

[@hull99]

Wow, I use to drive my uncles 4020 tractor on his farm back in the early 70's. It was used to pull the hay bale cart on his farm. Brings back lot of good memories!

[@v1rotait23]

I was smiling away watching this episode of you 3 pulling things apart and scraping off the gunk. I was dying slowly waiting for the degreaser foam to be sprayed all over the tractor before washing off with HP water. I hope you're able to get it all cleaned up ready for a new coat of JD paint. Looking forward to some quality TLC on this old girl. As for the younger one here, who is not named Pepper, she's just fabulous as she puts her hands to anything mechanical. Laura, you're a farm woman of class and high quality, who is not afraid of getting a bit mucky. ❤

[@NewtownGraphics]

I spent many hours on a 4020 back in the late seventies. That and the Ford 8600 were my favorites. Both very reliable and powerful. Brings back memories.

[@edcallahan6952]

Always love seeing your videos and thanks for sharing them with everybody. I too grew up farming and help my brothers with their farming but mostly fixing their equipment. I like your monorail and chain fall for your maintenance work. I too have gantry and jib cranes too help me, but the lower hook on your chain fall has serious problems I have noticed it in several different videos, the hook is really stretched open if you look at some of you lifts in your videos you can see the tip of that hook is almost level , the load could be pulled right off . If the load slacked it could pull right off. I have the same Yale and Townes hoist and many others . I am not a want to be safety guy telling you what to do, but be mindful of that hook I want to see many of your future videos of you and your husband. Thanks again ed I live down stream on the platte probably 80 miles .

[@richardpedersen9189]

Love your videos, Laura! Follow thru on the 4020 project 👍

[@ronniehahn1885]

Sorry folks, been busy with the primaries. What memories! I am a retired truck driver now, but when I was a teenager I was living in the piedmont of NC working on a very large dairy farm. I pulled a chuckwagon with a JD 4040 narrow tire to feed the cattle. Best time of my life working on dairy farms. I was running bobcats when your daddies were young men. Did you get your Pete to stop over heating?

[@PatrickGilmore-yf6hx]

I live in Yankton SD, I can tell you that we have a club for tractors like that 4020. They are growing every year. Pretty awesome to see those old tractors still running and in great shape,

[@dalejohnson2936]

What is the name of the club? Facebook page etc?

[@scottfristoe6468]

I worked with my uncle's 1969 4020 for many summers in eastern Nebraska when I was a teenager. Great little tractor. Would be great if you could find a vintage AM radio for yours. Ours had one in a big metal box that sat on the fender. Keep up the good work!

[@dannyvandenbranden4845]

He's getting his soul back.❤ I would give the engine a overhaul, he would be even more happy. At the moment I give a Lanz Buldog engine a overhaul. One ciinder 2 stroke diesel, 4700ccm. Water in the cilinder for years. Turned out the cilinder, 3mm, turned the piston 2mm off and put a busch over it. Made new bigger pistonrings. In a few weeks we'l find out iff he will work again. See you next time. Grtz from Belgium

[@crit62]

It is amazing I have any hearing after running our 4020 as kid. The Cab was so insanely loud. We also had a water cooler on top that would dump water on you every time you hit a big bump on a hill or terrace. Ah memories...

[@scottbecker3563]

I first saw you on the Matt's Off-Road Games... I didn't know that Farm videos would be cool...I'm a new subscriber..

[@wolfgrizzer]

Had a '67 4020 diesel with the yellow cozy cab. Yes it did get loud in the cab. That looks like a hiniker cab. Had the 158 loader on ours.

[@mikemullay5622]

When you can it would be a good idea to retrofit a rollbar onto that old 4020. Once you get the fenders you can mount some lights on the old girl as well.

[@darrelljacobjr2120]

@@mikemullay5622 John Deere is the company that invented the tractor roll bar, and figured it would save so many lives they offered the design to Caterpillar but only if Cat sold it to their previous and current customer base at cost, not for profit.

[@bobelston7024]

Hey Laura and Grant!! Love your channel!! Laura I have missed your “BYE” at the end of your last two videos. Hope you bring it back. BYE😊

[@K.J.Ray421]

I grew up in the 90's on a small beef farm that is sadly no longer operating. Every haying season, we would borrow my great uncle Clarence's 4020 with the Year-A-Round cab on it. Instead of a loader, it only had a plow blade we would remove every summer. Because of the Syncro Shift, that worked better to bale hay with than our Case 830. I miss living on a farm, can't wait to retire and find some land in the middle of nowhere.

[@charlieyellowstone8248]

We had a JD 4000 4010 and 4020. The 4000 and 4020 both had Hiniker cabs. All were diesels. We had a 620 that was gas. I forgot. We had a Westendorf endloader with a deep 6' wide bucket on the 4000. It was very handy to have. Those little hooks on that tractor are called a "clevis". 👍 Good luck on your tractor. 👍

[@AffectionateWrench-hv8hg]

Laura, you are the classiest gal on the tube.

[@bradmccormick358]

That tractor brings back a lot of memories. Looks like all that's left is a step and fenders...and maybe a ROPS. Thanks for the videos.

[@cornflake73]

My father-in-law sold his four team horses in 1939 for a John Deere B with iron wheels and a two-bottom plow. He paid $900.00 for them both. He told me how that had improved his operation and that he didn't miss those old hay burners. The next year he cut off those iron wheels and welded rims on for rubber tires which made it much better to ride on. He had that tractor till he passed away. She ran like a million then too. He was quite the farmer; he could wear the same dungarees all week and never get any grease or dirt on them. He could get more done in a day than any kid could in a week. Laura: I love your video content and I always admire your attentiveness to the situation. you ask before making moves that involve others, it is called safe operations. It does make me lament when I see those lovely smooth hands with freshly done pretty nails get into the grease and grime. Wear some gloves young lady, for me please. I also note that the hair is nicely brushed and groomed in the beginning but halfway through the hair is in a tight bun to go along with those hands. You are not afraid to go in there and do your share, which is admirable. You are a team player. I bet hubby is proud of you too.

[@larrybolhuis1049]

You will be HAPPY to have that cab off. As a young man I spent many hundreds of hours in a 4010D with an aftermarket cab and the noise is just captured inside that thing. Being in the open air is (most of the time 🙂) much preferred!!

[@lordchaa1598]

This brings me inspiration to get my grandfathers old 4020 back and running again. Thank you 🙏

[@henrycarlson7514]

Interesting , Thank You . A fine Tractor with NO Extra Crap. Mine has been on the farm since 1975 , Still Runs and operates just as well as then .

[@robertmurray1255]

At 16:05, the look on Grant's face was priceless! Laura asked who is gona clean this mess up. I want to know what thought went through his head but did not actually say? Such a gentleman.

[@Foomba]

That was so satisfying. After that wash it even smells new.

[@TheNCGardener]

In the crazy world we now live in, this channel shows us what life should be about. So relaxing!

[@leonhart2452]

One thing i would suggest is if the shifter has any slop in it, rebuild it. The improvement in shifting will amaze you. On the farm we spent quite a few years bitching about the shifter. Finally it got so bad we had to rebuid it. We could not believe how well it worked.

[@Pinion512]

Fantastic tractors. Those old 40 and 30 series were pretty popular for a while. We never ran them, but it seems like I saw them everywhere coming up.

[@maxime3343]

Great video as usual, thanks Laura & Grant ❤

[@tomralls2766]

I spent many summer hrs. on 4010 and 4020 JD tractors plowing after the wheat was harvest in Oklahoma during my high school years. We were pulling four bottom three point mounted plows. We also at times pulled tandem discs and chisels. Long ago and faraway. Quite the tractors.

[@frritter8253]

In the late 1960s, the 4020 (and its 4010 older brother,) were the most popular, stylish, powerful, and functional tractors... JD set a whole new plateau for the competition. This lucky one found a wonderful home.

[@mikehicks8566]

im impressed too im also a 1964 model , used up neglected and retired.. hell that thang starts better than me.. you have a true classic lot of farmers love to have that ol girl they can work on and fixem still so olg A's workin around here

[@brentkelsay3439]

The ol' 4020's looking good! Sorry Laura but when you said only 7k made I knew that was way low, the 4020's were obviously one of the most iconic tractors ever made. Total production run approx 185k from 1963-72. 🚜 My uncle had a 3020, the hot setup was an AM radio bolted to the fender and tuned to 61 Country! (WDAF outta Kansas City, not far from Nebraska). You, Grant, and Gage work great together! 👏 **Reading thru the comments I figured out you meant 7k gas 4020s, my bad. 8123 per TractorData.

[@Ice_Berge_00]

Really cool to see the progress on the 4020, it brings back memories of my grandpa's farm and the old 3010 and 4020 he had. My dad bought the 4020 and he and my brother still have it to this day. My brother actually got the high school shop class to do a restoration on it. Ours had the "year-around cab" on it, but lost a door in a haybarn fire in the 90's. They even fabricated a new door and made it look like new! Can't wait to see what you do with it. Maybe add a Battery box on the side and steps, amazing the the history those tractor's have seen!

[@sixthmanU]

My grandpa owned a 4020 for years and it broke his heart when he sold it after he retired from farming. After you removed the cab and loader, just brought back a lot of memories. Looking forward to following your adventure in cleaning and fixing this tractor up. Does it get a name???

[@Greg_Gatsby]

A name? How about “The 4020”? Simple, easy to remember, and respectful! 😂

[@LonniePlunk]

Hi Laura, Yes, I would purchase your homegrown beef.

[@samuelscragg7052]

4020 changed the world of tractors they were ahead of the game started in 1960. I’m not sure how many were made however I’m sure that thy were more than seven thousand made. I got one one with a JD loader and it’s open station and I use it all the time.

[@vincentriley8953]

The original battery box was mounted underneath the platform that you stand on and there is a step kit you can buy that will make it easier to get on and off the tractor

[@paulfeise3972]

The 2 pieces of equipment you bought and restored I think you got a heck of a deal on and the tractor I think will be a good thing too. Good work

[@chriswoolley8967]

The ole tractor runs pretty good. You will be amazed how much better it will run once you rebuild the carb and upgrade/replace some ignition parts. Those old straight cylinder motors will run forever and pull hard.

[@josephcooksley3219]

Funny i bounced around on a 4020 but with out a 3 point linkage ... in Canada ... used to stand on its hinds legs when pulling A Pull Type Combine ... lol ... Great Machines lol😂😂😂😮

[@robcates2383]

Exactly what I was thinking , Grant! Cab would make cool addition to a deer stand!!!!

[@joho9708]

Green Acres is the place to be. Farm livin' is the life for me.

[@fredde4305]

All those pins and no grease cab on a hot windy day are nice a little retooling it will nice in the rain you guys work well together

[@robellis9378]

When I started farming that cabin would have been a luxury even its present condition and we don't have snow, just rain and after an hour or two you were soaked and frozen, as for the noise, use ear muffs (I think you call them defenders). The loader, only rich farmers had them!

[@Dianeh12]

Hi Laura and Grant, Now it’s time to shine up the ol’ 4020. Scrub it down with some CLR (Calcium, Lime, Rust Remover) to kill the oxidation on the paint. Then apply a quality cleaner / wax and she’ll look like new! Love those old tractors!

[@BradHolkesvig]

I was 9 years old in the winter of 1962/1963 when my step-Dad bought a new 4010. I got to try drive it twice that summer but after getting it stuck twice, I had to wait until the 1964 season to drive it in the fields cultivating and plowing. He bought another 4010 that year in the fall so we had two tractors each pulling 5 bottom 3 point hitch plows. The 4020's started selling in the winter of 64/65 I believe.

[@jimposey8542]

15:24 Look around some industrial auctions. You'll find an electric hoist cheap for your building overhead crane. The 4020 was one of the most popular and durable tractors ever made. It's good to watch this rebirth.

[@michaelratliff7775]

Definitely one of my favorite Tractors! 👍