Lawn Tractor Starter Gear Repair with Briggs & Stratton Engine

Lawn Tractor Starter Gear Repair with Briggs & Stratton Engine
Don’t forget to click the 🔔 to turn on Video Notifications for more money saving videos and tips, featuring all the brands like Stihl, Husky, Husqvarna, Honda, Echo, Kohler, Tecumseh, Dolmar, Makita, Poulan, Ariens, Powermore, Briggs and Stratton, Champion, Murray, John Deere, Craftsman, MTD, AYP, etc.
Help me make videos or buy me a coffee!!
/ donyboy73
Connect with me on these social media spaces (plus that's where I announce contest winners)
Facebook: / donyboy73-the-small-en...
Twitter: / donyboy73
Instagram: / donyboy73
Watch my video on a lawn tractor that starts then dies after a few minutes here;
• Almost New Lawn Tracto...
Watch my video on how to fix a lawn tractor that clicks but won't start here;
• Lawn Tractor Clicks Bu...
Watch my video on how to fix a lawn tractor that is hard to start here;
• Lawn Tractor Won't Sta...
Watch my video on how to remove a seized wheel from a lawn tractor here;
• Seized Lawn Tractor Wh...
If you enjoy my small engine repair videos make sure to comment, share, thumbs up and subscribe. Thanks for watching!
Easy to follow and thorough step by step tutorials do it yourself (DIY) videos to help you with your broken lawn and garden equipment including snowblowers.
I do my best to teach you how to easily diagnose problems the fastest, quickest and most efficient way with real repairs beyond just replacing a spark plug. These tips are for both the homeowner and shop owner.
Whether it be a handheld, two stroke, two cycle engine like a chainsaw, weed eater, weed wacker, string trimmer, grass trimmer, line trimmer, hedge trimmer, strimmer, brush cutter, leaf blower, or four stroke, four cycle units like a lawnmower, wood splitter, lawn tractor, zero turn mower, snowblower, pressure washer, generator or a ride on mower that needs parts installed or replaced, I’m your go-to guy.
My favorite brands of spark plugs are NGK and Champion and are the ones I recommend.
I’ve been a small engine mechanic for many decades and also run my own repair shop so my videos are loaded with tips and tricks that I have learned and want to share with you. You will also find many tool and product reviews from top brands on my channel as well.
I have the largest Small Engine Repair Video Library on KZbin and the entire internet with over 1200 videos, just GOOGLE "DONYBOY73"!
I want "DON THE SMALL ENGINE DOCTOR" on KZbin to save you time, frustration and most importantly, MONEY with my HOW-TO videos!
Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. DONYBOY73 “The Small Engine Doctor” assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. DONYBOY73 “The Small Engine Doctor” recommends safe practices when working with power tools, hand tools, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not DONYBOY73 “The Small Engine Doctor".
#donyboy73 #smallengine #rideonmower

[@Club-Thirty-Three]

Hello. I really appreciate your helpful videos. I rebuilt my Briggs starter following your instructions. I also changed out the solenoid, plugs, gas filter and the coil since I had everything open on the engine. This is for my 1992 Craftsman 18HP flathead. The tractor is in great shape and now it's purring like a kitten. So again I say thank you for all of your time and efforts. Keep up the great work.

[@neilbrodie]

This instruction was spot on. I have a similar, old Craftsman tractor. It needed a new top end on the starter motor. This video explained the whole process which was good if you haven't done it before. Thanks Donyboy.

[@thairatcatcher]

That was one of the best instructive videos I have ever seen. Clear voice, spoken slowly and covering all aspects of the project. Well done. *****

[@donyboy73]

+peter charles thanks peter, make sure you are subscribed

[@saludanite]

Yesirree! Good tutorial! Thanks for the heads-up on the plastic shaft head. Remember, the spring retainer removal step was by-passed because yours had broken off.

[@mattda2bb]

Just want to say your video on starter mower gear replacement saved me both time and money. Thank you for your good work!

[@FrancisEMazur]

Great video. audio explanation. As a writer, I much appreciate the clarity and conciseness of your sentences. Thanks.

[@897473]

Thanks for the video. Got the mower running again for another year. Had begun looking at new mowers and thanks to you I'm saving lots of money.

[@2butchbob]

I hope that you are still receiving comments. I have viewed several of your YT videos and find them extremely helpful. Thank you very much.

[@donyboy73]

Bruce Henderson thanks bruce

[@WallyGator72]

You make the best small engine repair videos! I had this same problem with my cub cadet xt1 with a kohler v twin. I removed the starter and, surprise, all the parts were metal. No wear on the gear. I took the end cap off the shaft and a nut and washer came off with it. I refastened the washer and nut, put it all back together and back on the motor and, zoom, started right up on the first go. So, that nut must have a tendency to work themselves loose. Anyone having the same problem with a cub cadet xt1, before you spend 40 dollars on a new starter, check for this simple fix first.

[@WallyGator72]

Also, if you find that the problem is more complicated, probably best just to buy a new starter. This starter model looks like its not really built to be rebuilt. Would be more complicated than your average rebuild job.

[@donyboy73]

@@WallyGator72 I hardly ever rebuild anything nowadays

[@turbocharger747]

Dear Sir, Thank you, very clear and great instruction

[@slimmers00]

Once again, I have a problem & donyboy has the solution. My lawn tractor wouldn’t start today & this was the issue. I would’ve probably replaced the whole starter, had I not seen this. Thanks!

[@thedmn]

Thanks Dony, that's exactly what my problem was..Thanks for recording problem before discecting the starter!

[@earlb.3783]

plain and to the point, just what i needed. I enjoyed this video. I am sure this will help my 2001 CRAFTSMAN 25 hp B/S mrearlsc

[@earlb.3783]

Removing my starter from my 2001 Craftsman sure has been a new venture for me. I can say, one thing for sure I have learned a bunch. When you see something done it sure makes it a lot easier. Still learning mrearlsc 05/25/2023. Note / going strong 81.6 enjoy each day you have.

[@wolfpup738]

hi donyboy 73 i just ordered the right parts that you specified in your youtube video thanks again man what a lifesaver you are thanks god bless you

[@ronaldboulay6887]

Thanks Don. You make it look easy.

[@HokieJuju]

Great video!!! One of the best DIY repair videos I’ve seen on yt!!!! U speak very clearly & are very articulate!!!

[@BocephusMaguire]

You the man Donyboy! You make it look so easy...

[@understructurerepair7132]

man, this is just about the best repair video that ive ever seen.

[@EK-bt4nm]

Thanks a million Pal !!!!!

[@syedzahid4860]

excellent and clear video instructions. Thank you

[@coryharris1976]

Thank you so much for making this video!!

[@johnnyrebel11]

Briggs and strattons oem part for that is now made in metal and the gear in ABS plastic. I just replaced one on my simplicity 6216

[@richbrice3299]

Perfect, thanks Donyboy.

[@ezelgrier5971]

Ty sir it worked

[@jimkenna3362]

Donnyboy ur a legend saved me plenty of hardship and euros 👍😁jim from ireland

[@dmitrijusik5043]

Thanks for the video Don, it really helped me out.

[@noway180]

I very rarely work on anything but i still like to watch all your videos. So keep them coming.

[@BernardBoyGenius]

Donyboy, super professional videos! They keep getting better, one day you'll have to show us all how you do it!

[@helphos1]

One of the best KZbin videos I've seen! Great instruction with no BS.

[@jadon320]

Thanks dude

[@billh5781]

Great video - Thanks!

[@wbmitche1]

Thx Donyboy you’re the best.

[@steveash656]

Really helpful as ever.

[@RaivisKarzons]

Thanks for video!

[@316StSt]

Great video. I was wondering how I was going to tackle this problem on my Westwood - with the same B & S motor as in your lawnmower. Now I know. Many thanks.

[@authorgalahad]

thanks

[@crazyforever3006]

Thank you for the help. You help me to repair my Problem. These Video is realy helpfull.

[@nocturia8226]

Best instructional video I've ever watched!! Love your Canadian accent. My wife is Canadian so I,m kinda partial.

[@donyboy73]

+Nocturia thanks lol

[@swhite10539]

Wow, thank you. Your video gave me the confidence to attempt fixing mine. However, in my case, the gear is made of metal and seemed in good shape, and what is happening in my case is that the small gear is not "jumping up" to engage the larger gear. So, I worked the gear up and down and hit it with some Break Free and it started working 90% of the time but every now and then it would hesitate to jump up. What would cause this? I have a Koheler Command 11-16 HP motor from about 15 years ago in a Yard Machine. I am sure something more needs to be done to permanent solve the problem? Thanks for the great video!

[@ncrdisabled]

I have heard that they make the one gear out of plastic so in case the engine will not spin it only breaks that gear and not damage the engine . I have a 1991 craftsman the you have to pull the top of the engine off to get to one of the bolts .I have a briggs book that says that is the only way to remove the starter . I wish it was as easy as yours. I also have a 96 and it comes out like yours . Keep the great videos comming.

[@upnorthvlogs]

Yes I have the same lawn more thank you very much

[@bruno17860]

you where a great help thank you.

[@gst69man]

well done video. thanks

[@TheSAN637]

You are the best out there. Thanks for the easy help.

[@donyboy73]

+Daniel Sanson thanks for watching Daniel

[@andrewluger7133]

Thanks

[@donyboy73]

Thanks for your support!

[@INTERNA9]

THANX

[@steved503]

Good video. I liked the way you showed details on removing the roll pin using a punch with the starter shaft supported by a vice or something metal, such as a socket from a socket wrench set. I needed to know how to remove the roll pin without damaging the starter. My only suggestion is that you should tell viewers that the "appropriate punch" to use is a 1/8-inch punch that is not tapered (which I learned from another KZbin video on this same subject).

[@jeremiahmnjohnson]

It looked like the Flywheel is chewed up. This new starter gear will last about a season. It happened to me. Now i am replacing a flywheel which you do instruct in another video. Good Mechanical Skills dude!

[@brianpenley4509]

Thank you

[@donyboy73]

+Brian Penley you're welcome

[@bubbaschappaugh4058]

Good job

[@donyboy73]

yes it did

[@awerlpoi4502]

Great video

[@mamede1043]

I LOVED YOUR VÍDEO.

[@sictam]

Thanks man i can fiks my engine of my lawnmower now and its kost many. Thanks and greettings from Holland. Jos

[@647762816]

Another good helpful video.

[@ajkemer]

good video my ztr does this sometimes and I wanted to know what to do when my starter goes out

[@wolfpup738]

hi there i love your channel on your youtube video now i know how to repair mine thanks was so helpful you rock man thanks again

[@tombeckett4340]

Great information thanks 👍🇨🇦

[@TubeScience]

Thanks a bunch. My gear mechanism self destructed and I wasn't exactly sure what went where after I pried all the pieces out. I bought the whole kit above the motor, but it didn't come with the washer. Hmmm.

[@MYSUPERBOAT]

Very well done video ! You make the best repair videos

[@29stealthfighter]

I got a starter on a 13hp yard machine it won't be easy as you show these easy repairs trying to place a nylon gear on it. I couldn't get no repair shop to replace or fix it for me. The bolts in the aluminum casing were strip so I jb weld them to it. I'm so poor can't afford a riding mower. I bought this one for $50.00 as is got it fixed just right only problem is the starter.

[@donyboy73]

@BriggsMower i set them at .003, sometimes it's the only for it to start through that compression stroke

[@WillsGarage91]

excellent video as usual Don.

[@biggestilo]

the 8 ppl who disliked this video probley forgot to to disconnect the battery lol great video...very clear and understandable

[@donyboy73]

+BIGGESTILOS thanks

[@donyboy73]

@sictam you're welcome, I was in Holland in 2000

[@donyboy73]

that would be the best thing to do

[@peterwoodcock8464]

Thank you what a fantastic video but I can't seem to find those parts you had the gear and the stop plug

[@chrisdoodle98]

I am about to do this repair on my cub cadet. I was wondering before I get into it if you could specify the plastic part that broke off during the process. I have already ordered the gear itself I would just like to know that plastic piece specifically in case my luck fares no better. Great video, very in depth.

[@tommccauley1160]

Got a twin 18 vanguard eats one gear a year, Breaks in the winter found a 1/4 in drive socket that fits in there.

[@frankdavidson9675]

buy your gear somewhere else it made in china with soft metal should be steel mine is

[@SwordInc.]

Thanks for the video, it really helped me out. :-)

[@meowbyte5655]

I didn't knew it was so simple.

[@SuperPncho]

@donyboy73 thank you donyboy appreciated

[@HokieJuju]

I just had to do this on a brand new starter!! I’ve only used the mower 3 times at most since I replaced the starter. They sent an extra plastic gear with the starter when I bought it but it’s a pain in the ass & very time consuming having to go through the whole process of taking everything off to get the starter off and then fix it and then the whole process of putting everything back on. I hope the replacement lasts more than 3 mows!!! 😡

[@FernandoSanchez-xl1je]

I need that part

[@lisamccollum6193]

Great video. You made it very easy to understand. Thanks

[@donyboy73]

you're welcome

[@fortyeighter]

liquid wrench........sprayed on the shaft....... or what I prefer is white lithium grease.

[@wrightly96TN]

i took the starter off, and everything looked okay. so i was going to grease the shaft that the clutch spins on. i figured while i had it apart it would be a good idea. i really need that c shaped ring removed however,hahaha its driving me nuts

[@donyboy73]

you're welcome and thanks for watching

[@donyboy73]

@BernardBoyGenius thank you

[@Liamautomechanic]

good vid there don.

[@rameshm2100]

thanks for the video. I replaced the starter gear about 3 weeks ago, but it wore out again. I have had this lawn mower for the past 13 years and never had to replace it. do you know what can cause it to wear so quickly.

[@rayaratkon1654]

Hi, You make good videos! My starter motor on my ride on mower the magnet is broken. Can it be glue it? Cheers Ray

[@doitall3486]

hi i loved your video can you do one on patching a mower deck and pulley thanks

[@8tyman8]

@skaaltel the ring gear is aluminum on most briggs engines except for snow blowers with 120 volt electric start and bigger engines like 16 hp + is is cheaper to replace the the $4 gear than a $40 ring gear

[@donyboy73]

@SuperPncho may be overfilled with oil, make sure the oil is not gray, if it is replace it.

[@v65dreamer]

Just an FYI. The battery BOX Craftsman part number 129965 can replace that battery tray for what I feel is a MUCH better set up.

[@thecockysucker6578]

Hey DB ... I replaced the entire assembly. I tested it on the bench and of course it shot up to the top as if it was going to engage the flywheel. I put it on the lawn tractor and all it did was spin at the bottom and not rise to engage the flywheel... Thoughts?

[@donyboy73]

@GudeCharles uusually u can, just make sure the shaft is the same length and size

[@donyboy73]

it might just be seized on the shaft from sitting not being used, try spraying penetrating oil on it to free it up

[@Fordfarmer9700]

if you turn the gear upside down it will last a long thime than rright side up it still works the same way because my tractor ate a gear up every year i put it on upside down and never had a problem

[@tomschultze7406]

with gear assbly off is good time to lube top bearing bushing

[@legend8ball]

Hey Dony, any advice on what part number I need to replace if when I tightened the bolt holding the red ignition cable in, it crumbled the plastic looking washer behind it, now the screw is loose. Or do I need a new starter motor completely?

[@redneckbryon]

Good types, but you don't need to unhood the battery, as long as you don't hit the key well the starter is off it is ok, also you don't need to remove the oil tube bolt, in some cases.

[@InventPeace1]

Stripping too many pinion gears on starter : Don't forget to check bolt tightness, there has to be a lockwasher on each bolt otherwise they bottom in the hole and leave a dangling starter motor that strips threads faster. Chk starter frequently for looseness/wobbly install (loose or bottomed bolts). 2. U can use 9mm or 5/16 socket & hammer to tap the snap ring back in. 3. One guy showed how by turning the flywheel (battery disconnected) by hand he can get the pinion gear off & one without taking starter or flywheel off. Another guy showed how he with hand grinder, ground off about 3-4" length of top side of flywheel (don't get into the flywheel teeth) to make more room to get pinion gear off easier removal again w/o taking starter or flywheel off. Good video, thanks.

[@ramonabreu2838]

Hey buddy I need that part that you just change on your starter lawn mower

[@brucebuck1955]

can you show us how to replace a plastic ring gear .on a B&S engine I got a replacement aluminum one but have not replaced it yet.

[@donyboy73]

yes rotary makes a kit, i forget the part number

[@JSW793]

Man I hate rollpins, I had to do the same thing for my twin a few months ago and broke all the plastic parts trying to get it apart, along with the roll pin itself. Briggs actually does have a kit with the metal piece, although it was NOS so I'm not sure if they still make em that way.

[@vitobellino]

Don, Great instruction. My tractor looks the same (but 15 hp). I appreciated you sharing that noise in the beginning of your video. Mine does not make the same noise. Mine makes a 1 click sound. The battery is fully charged, the carb rebuilt, and after I tried several times, it started to smoke at the bottom of the starter. Please clue me in to my next move. Did I burn something up by trying to start it too many times?

[@stevenhespelt7951]

Hi Nick - my tractor experienced the same tonight. 1 click 1 wisp of smoke. 4 month old battery was strong on Sunday. Did you wind up replacing the starter?

[@trecnga6645]

mine went. i got a complete gear kit but there was no washer and my old one got chewed up. seeing as no washer was supplied,do i need it?