Laying Out Trusses on BLDG #1! [DAY 17]

[@tracycolorado]

grateful for anything

[@mootzeroni]

Enjoying your series so much, I'm cancelling cable.

[@HelenGPitts]

Previous month I managed to withdraw my first five figure paycheck ever!!! I've been working for this company over the internet for 24 months now and I never been happier... They are paying me $95 per hour, and the most desirable thing regarding it is the fact that I am not that tech-savvy, they only asked for basic idea of internet and simple typing skill...Awesome thing about it is the more time I got for my kids. I am able to spend quality time with my friends and family and take care of my children and also going on family holiday together with them very consistently. Don't neglect this chance and make sure to react fast. Check it out, what I do... *worth48­.­c­o­m*

[@pat_link_]

If you want to watch detailed work this channel is the one to watch. Great work Matt

[@tonymejia5123]

Yo fox is a hustler 💸🔨

[@madmax3864]

Hay good job 👍 Matt and boys 👍👍👍👍🤙🤙🤙🤙😎😎😎😎😎😉😉😉😉sweet

[@alexcarrillo8957]

Good progress Matt you and your team are all consistent. Those boots and levels sound good right now.

[@nicholaslewis9721]

Glad to see you guys back at it, I think any one of the days would be awesome to win, the coffee pot is pretty sweet, but so is the Diamondback

[@Diablo690401]

I was watching another channel, called the honest Carpenter when he dropped your name in the video. I’ve been checking out your videos for the past couple of months. I never knew that somebody made a channel that had anything to do with setting and rolling trusses and construction. I’ve been in the Truss business myself as a driver and a operator for 20 years. But you guys are a little too far south, because I work in Northern California. But you never know this business, maybe one day I could come by and set some trusses for you guys.

[@shepherdfree]

This build coming right along. Looks great!

[@russellheaton4930]

The Winery is coming along well now, carnt wait to see the trusses going up keep banging it out Matt and nice to hear Q is coming on :)

[@davidwells298]

Great job young Larry haun

[@josephmckay9046]

you all must get along really well as a team. Looking good

[@fernandolewis3454]

....Enjoying the awesome progress.. Bang-Bang...😎

[@patrickconnolly2997]

Sucks about anchor bolts. They should set the before pour like the hold downs. Builder said to me “ why do you need to go there before they pour?” I said because it’s more work later if their hold down bolts are off. Sure enough concrete guy had no clue where they actually went. I set them properly and haven’t had an issue yet on current job.

[@Aj-fc7cz]

Thing are looking good on Winery man, nice................. Looking forward to boots and lights in big giveaway!!!! Take care, AJ

[@royalvarez6436]

Nice, work-long ass day though. Coffee maker is the best of the gifts thus far.

[@jimmyers2543]

Anything I should win I would greatly appreciate be overwhelmed to be picked to receive a gift from one talented young man. I was raised not to look a gift horse in the mouth. Bang on Matt and keep up the great work and keep the videos coming. God Bless You and all your family

[@stevenyeo5481]

Roof trusts hell ya! Bang on Brother!🤘

[@dangoras9152]

I'm in for anything it's all good and will help anyone who's trying to start up bang on brother

[@j_rockss8235]

Ive been waiting for this!! California stand up! Bang on🤘 Bang on🤘 Bang on🤘

[@marksparkplug7758]

Matt I would be thankful for any one of the gifts. Take care

[@hvacgabe5889]

Build is coming together. I love to watch your videos. 👍

[@cameronoverfield8764]

If I had a t shirt I would be happy. Good job man

[@T.E.P.]

This is getting super exciting! Eager for tomorrow!

[@georgehauldren7077]

Great work. Nice to see young guys in the trade. I was 23 when I got my start.

[@antoniocampuzano2546]

I just want to say Matt that you’re a young kid and doing big things looks like you know a lot and keep up the great work

[@donforsyth9290]

Dude, those old Emglo compressors are the best. I'm still using one that i got 20? Years ago. Too bad they went out business. Bang on!

[@BenLeclerc]

Lol near the end, when the lift moved, it sounds like an old man yelling lmfaooooo

[@waynegoebel395]

I thought it was part of the background music for half a second. LOL

[@keeganmckeown547]

I just can’t wait for trusses

[@MattBangsWood]

Putting them up tomorrow!

[@remodeljr2714]

I'm in college but I am passionate about construction and know that I will be working in the trades after college. Your vids help college go faster/ Thank you

[@michaeltilburyiii2760]

Ever boots and a level would make my year!

[@jeremychmielecki6370]

My favorite part of building is trusses install

[@anthoniibegay3980]

Work boots n levels good one...getting one wud make 2019 my best year.🤘

[@alonsorosales1093]

LIKE THE TEAMWORK!!!! GOOD FLOW

[@saulmoreno3252]

Just late 2018 we've been allowed to use titans. Nice nice hardware. No more epoxy. Drill and set

[@bri_guy508]

I want that diamondback setup so bad! If I don't win (which I prob won't) might have to buy one

[@lorenrickey5481]

Bough gas in Cda, Idaho yesterday at Costco for $2.59 gal, 4 bucks in Cal wow.

[@aaronhernandez7435]

And I’m looking forward to winning day 7 Matt bless me with being the winner or day 7 or any day thanks man !!

[@duncorp1]

Good days work, great team

[@jeremymiller7694]

I want the nail bag and boots!

[@rubenvarela4077]

23 and 1/4 and then nail then 24 on center and forward nice

[@raycut8]

you got your truck back

[@MattBangsWood]

Nah, this is prior to that day. My trucks in the shop right now.

[@raycut8]

@@MattBangsWood O bummer

[@donellweathersby9163]

I've learned a lot watching your channel.Keep it up,bang on

[@drsh0ckalu]

That old roof XD Tool belt and boots! :)

[@brandonbedrosian6257]

The Diamond back tool belt would be nice to win, or a level. Thanks B.B.

[@garylooft1925]

Keep up the videos

[@TC-rk9vu]

Matt put some MBW labels on some wine and sell it from that build...... ......CHEERS !

[@jeremychmielecki6370]

Can't wait to win any of gifts

[@ArtisanTony]

Looking good!

[@yosebko132]

Wait. That’s OP.

[@Eenloodgieter]

Realy enjoy the vid's keep it up 👍🏻🇱🇺

[@austinthrasher2766]

Really would love a new pair of boots for work

[@pndub2k451]

Yo that was sick im starting to think thats what I wanna do after done with school🤘🤘🤘

[@johngee4688]

Sola levels forsure 🔥

[@gordonclark7632]

Good day from Australia. I have watched all of the winery build and because I am a bit hard of hearing, I miss the names of your fellow workers. Maybe as a part of your videos you could introduce your main players and make the video a little more involving. The only one I identify is the smoker. You could say something like this is so and so (our apprentice) so and so is a fast machine nailer man etc. Just my thought.

[@lorenrickey5481]

Matt, Glad to see you using the scissors lift to mark the trusses.Are you going to bring in a second lift when you hang the trusses for fastening both sides?

[@MattBangsWood]

We’ll be tied off 100% and using the scissor as well. It’ll be fun! Unfortunately we’ll be craning all trusses in, one by one! Starts tomorrow, keep your email open, I’ll send ya pics tomorrow. 😊

[@Z-Bart]

@@MattBangsWood MBW if each feller (2) working to set the trusses each carried a 22 1/2" block...would that not guarantee a two foot center for each truss? Bang on. 👍

[@TheDirtyBirchTrails]

95 cents per litre, here in Canuckystan its $1.20 per litre. Pretty shitty when you have to drive a large pickup truck to bring tools and material to the jobsite !!

[@SuperPowerWomen]

Damn im early, loving these video’s lately 🙌🏽

[@jamesdooley5194]

This looks like a monster truss job. Do you guys use a reserve tank for air

[@aarongrubbs6506]

Great video! Hoping to win the diamondback gear!!!

[@aaronhernandez7435]

dope video matttttt

[@jondocket7215]

The boots level and lights

[@kenwarywoda977]

Any prize would be sweet.

[@sonyatipton7264]

Only thing is I would like to know where the other trusses were marked on. That can be very confusing to someone like us. I know its 2' center but from the 1st one being laid out on 231/4" to 243/4" what would the tape read on the other mark ups.

[@charlespalmer8785]

What were the anchors Matt mentioned? Titan? Anyone have a link?

[@lorenrickey5481]

Matt commented that he will release a video shortly about that above.

[@MattBangsWood]

www.strongtie.com/mechanicalanchors_mechanicalanchoringproducts/thd_anchor/p/titen-hd

[@charlespalmer8785]

MattBangsWood thank you. Love the videos.

[@mattsalmon559]

That 1st redhead washer was like 3/4 outside of green plate. Smh lol and even if they were all wrong but the same to each other. At least then theyd all be lined up and perfect. Perfectly wrong but straight

[@DailyMobbin]

Bang On🤘🏼🔨

[@neftaliolivares5685]

Would love to win that big red and ever boots 👍🏼

[@markst.martinii9635]

Whered you find fox? Give that man a raise for Christmas.

[@JuiceBanger1]

Petrol is 127 pence or £1.27 a litre here in belfast.

[@chrishardy3473]

I was gonna ask how Q was doing? Is he showing a natural enthusiasm?

[@MattBangsWood]

He cut every single sheet we installed on this day, didn’t screw one cut up. I gave him my short point number, and he did the rest. Super proud of the kid!

[@DEAexotics]

another great video and i would love to win anything in the give away

[@martinishakerxxl]

Yeehaw

[@lcriveralcr1627]

Fast forward gas prices in California 6$ +

[@BrandonsGarage]

Where is the link to tight-in (titans?) 6:04

[@MattBangsWood]

Darn, I shared it in a comment on here. I need to put it in bio! 😊

[@petereyre5188]

👌👌👍👍👍🏴󠁧󠁢󠁥󠁮󠁧󠁿 Drill bits 🎉🤶🤶🎅🎄

[@Factory928AC]

Good job Q! I wanna win your gopro Matt lol

[@johnrohdy7068]

Hey Matt quick question I’m not a carpenter but I do my own stuff around the house My question is when you were laying the trusses out why did you move the tape measure from the end of the wall into where you marked the first truss? Thanks John

[@lhayes9781]

John Rohdy it simplifies the layout. The truss layout from the nail/edge of the truss is 24” vs calculating 24 on center. 24-25.5, 48-49.5...

[@MarsiFoxOfficial]

You call him Foxy too, eh? 😁👍🏼

[@kylehoyland]

Matt, what kind of grip did you put on your Dalluge?

[@lorenrickey5481]

He used electrical tape. Fits into his sheath easier.

[@herbertherbomoore415]

Where are y'all working at?

[@jredp15]

I can’t tell but is that Q cutting the sheeting.

[@MattBangsWood]

YES!! EVERY FREAKIN SHEET, perfectly. Not one mistake the whole day.

[@jeremyfinn7684]

Why not mark the top plates before putting them up? Can mark both walls at once

[@MattBangsWood]

Accuracy reasons. I plate partially on the ground, some in the air. Much more accurate in place.

[@jeremyfinn7684]

@@MattBangsWood That's fair. Still quick with that scissor lift anyway

[@rubenvarela4077]

Yeah my bartha and do the same standing up

[@zacheagle3018]

Is there going to be any partition walls on the inside or wide open space?

[@MattBangsWood]

Wide open space!

[@MattBangsWood]

Well, one small office space in the big building.

[@user-qm9nb1oj9n]

👍👍👍!!!

[@jonyrivas3581]

Why don’t you walk the plates if the walls are properly braced

[@MattBangsWood]

Safety reasons. 18’ drop doesn’t treat anyone nicely. We’ll walk plate when trusses go up tomorrow.

[@farsideofhell7644]

😊😊

[@Pontus95]

Wow, if gas was only $4 i would even take my car to the mailbox

[@Pontus95]

@@theguy9290 about $6 here where I live lol

[@Pontus95]

@@theguy9290 Hahahaha

[@pjohns8]

Why do you sometimes skin the wall before you raise it and sometimes after?

[@lorenrickey5481]

Not Matt, but he has said that due to the size/weight of some of these wall lifts it would be pushing the load capacity of the equipment to lift a sheathed wall. Also sometimes a wall won't square up so it's easier to correct after standing, then sheath. Then there's plumbing in the foundation that might be in the way and finally, the slab might not be level. Hope this helps.

[@pjohns8]

Many thanks, carry on!

[@robj2704]

What's the outcome on your pickup truck trans problem?

[@MattBangsWood]

It’s being fixed, transmission comes today! 🙃

[@ykciR]

Why did you mark the first truss at 23 1/4 wouldn’t the center to center on the gable to that first truss be 23 1/4 on center and not 24?? Jw

[@MattBangsWood]

Similar to pulling stud #’s, hooking corner, 15-1/4” to it, hook that and pull 16”. It works out perfect for our sheathing on the roof.

[@rubenvarela4077]

Alot faster

[@timmarmontelo3256]

What is the pitch on the roof?

[@MattBangsWood]

2/12 bottom chord, 5/12 top.

[@mk007.]

Please tell us how much they pay you for this job? Roughly

[@JeanClaudVanDabb]

How do I sign for an apprenticeship? Looks like a good time

[@MattBangsWood]

Tons of options! Where about ya from? Would love to help you find a spot.

[@JeanClaudVanDabb]

I’m Washington state between Seattle and Portland Oregon ! Actually been trying to find a non union contractor to work for , looks so much fun and I have 3 years In the trades , mainly roofing and pre engineered steel buildings !

[@JeanClaudVanDabb]

Framing contractor *

[@JeanClaudVanDabb]

I have some carpentry experience too, mostly in remodeling and cement but if you wanna give me a shot I’ll move to Cali and work for scraps until I prove myself hahaha

[@JeanClaudVanDabb]

@@MattBangsWood awesome videos by the way these have been getting me stoked I have only framed metal buildings

[@sprintcarguy03]

I just want to win one of the days I dont care what day

[@fredhunter1202]

Shouldnt you have went 23 and a quarter from the overhang or is there one?

[@MattBangsWood]

It’s all custom cut rough sawn 4x6” tails / lookouts. Our gables will notch and lookouts go in to make the overhang. Perimeter nailing is gable end, so we want our 2’ pulled off that, smooth sailing after that.

[@rubenvarela4077]

He would need one more turss if coming from over hang. Do the lay and see

[@denisricher1349]

$4.00/gal...OMG I just filled up the car for $2.27/gal in Georgia....

[@scottalexander8856]

guess it pays to live in those fly over states when it comes to gas.... paid 4.35 today

[@denisricher1349]

@@scottalexander8856 Don't know if I would consider Atlanta a fly over state... We just don't have as many taxes as CA

[@mf29961]

$2.15 in Jackson, Mississippi

[@lorenrickey5481]

Cheaper than water!

[@MattBangsWood]

WOW!!!

[@markchristian4632]

Second

[@mf29961]

I didn't catch the Titan product detail. Anyone know what he had mentioned?

[@MattBangsWood]

Ahh, I totally spaced it in the description! Give me a minute, I’ll post it.

[@MattBangsWood]

www.strongtie.com/mechanicalanchors_mechanicalanchoringproducts/thd_anchor/p/titen-hd

[@mf29961]

@@MattBangsWood Thanks for that info. I do have a question that you might give some insight. What would be the cost savings, in labor or material for this scenario if any. A concrete slab with no embedded tie-down in concrete, framing crew doesn't have to measure around it for the bottom plate, drill out when framing a wall and then while those walls are stood up you come in a just drill for those Titens and screw it. It seems like it might be easier labor, but not cost-wise. Thoughts?

[@rubenvarela4077]

@@MattBangsWood ok i see said the blind men