LAZY SUNDAY: Sounds Effects Board Kit - LS2

[@peteralexander478]

If you look at this item on the BangGood site they talk about soldering in that capacitor in the event of unit not functioning correctly.

[@22smudger]

What were the header pins for? If they included the Vcc and God connections, then you could have put the cap in where you were connecting power - seemed a bit odd having the power connections there in the first place...

[@johnjamieson7688]

i'm guessing the header pins can be used with something like an arduino to do the different settings instead of using the switches, but not positive.

[@maicod]

WOW I love this 4K camera that you lended. Its so clear/crisp and great microphone

[@Davedarko]

I'm watching this while I clean, maintain and setup the 3D printer.. length is great for that :)

[@WestSideJooo]

loving the series, i ended up purchasing the last clock kit myself, will see if I have to order this one too after i've finished watching the video :)

[@tumama001]

Is this a good first project for a beginner withouth any experience in electronics?

[@DavidWatts]

I would suggest something a little more useful like this clock - amzn.to/2gniKYP - It should be a good soldering challenge but hard to mess up with component placement.

[@BrazzaB1]

Liking the way you find the resistor values - I cannot be bothered to learn the colours too!

[@Davedarko]

Brian B sometimes they just grow on you - so far 0, 1 and 2 are stored in my brain. for most off the stuff you get along just fine with that. other colours are just funky numbers I have to look up.

[@BrazzaB1]

Yes I suppose I might have to learn, although I will always check with meter.

[@ParedCheese]

Wire links *are* the way go with the edge-connector. Makes a much neater and cleaner build. 😄 I tried both ways.

[@L00o3]

Hello I have a question, what is the jumper wires? Can you give me links where I can buy them? Thanks

[@DavidWatts]

Sure, just the super cheap jumper wires amzn.to/4blHknf they have round ends rather than square so can slot into plated pcb holes more easily than the square ones.

[@WojtaChanel]

Hey dave, could you say a word about the multimeter you are using? How does it serve you and things like that. Im looking for a new one and I would love to know your opinion on the uni-t brand. Awesome video as always. Thanks!

[@DavidWatts]

Yeah, I am happy with the Uni-t. I can't afford expensive kit and neither can most people. It is a fantastic meter for the price and it lasts a long time on a 9v battery. I wish I had another one in fact.

[@WojtaChanel]

Awesome, thanks a lot ;)

[@MrBrymstond]

Sounds like a 1980's handheld video game.

[@maicod]

You're not scared of fumes/parts going into your Coffee :)

[@willproctor7301]

I had to flux the crap out of the same kit, loads leaks through and makes a really good connection underneath anyway. I had the same left over cap too.

[@superjimbo1945]

I was wanting to see that switch installation and how they went in as i noticed a + and - by them.

[@cbmeeks]

I prefer 15-25 minute videos. Love the content. But if this is your "lazy Sunday" videos, then does that mean it is our "lazier Sunday" videos because we're watching you be lazy? LOL Great work.

[@DrexProjects]

I just finished my kit. Only took me 3 years.

[@bestamerica]

hi D... ' i have a good kit with 16 musics / sounds... here is video... kzbin.info/www/bejne/aZK6l4SMeLuWhpo

[@Ethan-de5kt]

Where do you work

[@superjimbo1945]

I guess those switches and IC holders must have jumped on by themselves while you were busy snipping.

[@superjimbo1945]

The 104 capacitor is next to the 4248 diodes.

[@superjimbo1945]

That was 4148 diodes

[@BrazzaB1]

Get the resistors the same way around! Is it my OCD or what? :o)

[@bestamerica]

' hi D W... i have one good kit and already in my channel video... my kit connect to LEDs and speakers

[@andymouse]

I no its "lazy Sunday afternoon" but please read the colour code first then check with the meter you will be surprised how quick you will find ya don't need the meter and better for beginners........Oh yeah and while I'm at it get the resistors the right way round (pretend their polarized) ya messing with peoples OCD....and another thing, you really oughta ........oh sod it just do ya own thing man!

[@bestamerica]

' rather blue board is a looking better pretty than green board... or no matter

[@ianspencer7758]

You should make video's as long as it take's.

[@johncoops6897]

Who is "take"? I'd like to watch take's videos and time how long they are.

[@MrBrymstond]

Practice...