Would you do this yourself?

Рет қаралды 7,044

LEAAD Farms

Күн бұрын

Пікірлер

@milliearnold5087 4 ай бұрын

Good job Ethan. You are lucky your dad is a wealth of knowledge to share with you.

@chuckmyers7698 4 ай бұрын

Thanks for the steady stream of videos. Enjoying each one, 100 push ups a day, feels like I'm back in the U.S. Marines corps boot camp in 1961. Im 80 so it's going to take a few sets.

@bjarkekorsgaard 4 ай бұрын

Perfect job Cale - you are perfect as an electrician now ✌🤘👍

@torque350hp 4 ай бұрын

The end clip, Nebraska light, soothing.

@rockercover 4 ай бұрын

A.C. Power - phasing - for motor rotation, with, by wire placement. There are electronic phase detection devices available, to check direction.

@ZootSuitCooter 4 ай бұрын

Good one, Cale, love stuff like this.

@davemiller8238 4 ай бұрын

FYI, the juice on each leg depends on the transformer(s) the local power company supplies. In your case, you've asked them to supply a 3 phase system that delivers 480v across any 2 phases.... so the math for each leg equates to: 480v divided by the SQUARE ROOT of 3 = 480v / 1.73 = 277v on each leg. If you wanted a 208v 3 phase delivery, the math is still the same (just different transformers): 208v / 1.73 = 120v on each leg.

@cindymccafferty8346 4 ай бұрын

?Suggestion? Paint the cables and connectors with nail polish, then match the colors up when you go to reconnect. Dollar Tree has cheap nail polish. This also works for electronic devices when you’re reinstalling. Like speakers or tv connections.

@jow5545 4 ай бұрын

If the motors are wound the same it would work. Sometimes they are wound different. The bump test key to check proper connection. It is amazing that 75% of the time you have to swap something. Lol

@DarylFrost 4 ай бұрын

Cale great video. Love watching yours and your daughters videos.

@jackbyrnes8256 4 ай бұрын

each phase is 240v each phase is 120degrees apart (Total 360 Degrees) and your correct "to change direction change any 2 phases" Love the Videos dude

@kencochran5956 4 ай бұрын

Each phase leg should be 277 Volts (Phase to Ground). If you measure (phase to phase) on any two legs is 480Volts. If you blow a single fuse and only measure the two good phases it will show as good. Always test all three legs when testing three phases.

@johnmedici6655 3 ай бұрын

Man or no man, cats are essential to the farm too keep the mouse population down! I had two cats and they worked together, one would bring one in the house, and the other one would eat it! 😅

@CoreyLeopold 4 ай бұрын

I can remember helping my dad swap electric well motors like that, except instead of finding another in town we "stole" a motor from another well that wasn't in use.

@Thuy_Dailylife 4 ай бұрын

❤❤interesting 👀👀👀

@MattDeWeese-o8v 4 ай бұрын

Practice LockoutTagout with power, so no one throws on the power 1/2 mile away down the road.

@daveschwerdtfeger7842 4 ай бұрын

👋😊

@lpdirv 4 ай бұрын

Since you have power to the pivot, would it make sense to have solar in the corners not irrigated. Seems like a business opportunity as the wires are already there for export of power. Could be through a third party under contract. Might be a business opportunity.

@alarapho136 4 ай бұрын

What is the rain equivalent in inches of one pass of your irrigation systems? Is it like an inch of rain for your crop, for example?

@transmitterguy478 4 ай бұрын

HEEEEEEEEEEY Cale! Which is cheaper to operate, an electric pivot, a gas pivot, or a diesel pivot??? We all wanna know. Tell your son to read up on 3-phase motors and how they work, it is very interesting.

@billy19461 4 ай бұрын

Put a guard on the PTO shaft, please.

@steveanderson2095 4 ай бұрын

Yes. Please do

@aldenweiss3829 4 ай бұрын

I heard black pepper will seal a leaking radiator

@katreniaclark 4 ай бұрын

Afternoon on a Saturday Cale. First off, Let me say GREAT job on getting the motor replaced and wired properly the first time. Second, As a hot tub repair professional for 18 years, A pump is a multi-piece part that is put together. It is made of 2 pieces, A Motor and a wet end. Inside the wet end is an impeller that attaches to the motor shaft and needs the proper amount of clearance from the housing to work properly. I hope you all have recovered well from the basement flood and how is Laura's trailer doing? Have a GREAT weekend.