Leak No More: Valve Stem Seal Replacement | Mercedes 190E W201

In this episode, I will show you how I replace the valve stem seals of an M102 engine in my 190E.
__________________________________________________________
Get a manual for your 190E: amzn.to/34IpIRG
Products/parts that I used in this episode:
Elring Valve Stem Seals: amzn.to/3qEhkkg
Elring Rocker Cover Gasket: amzn.to/3Nl1SSY
MANN Oil Filter: amzn.to/3sfj5jT
LIQUI MOLY 1310 Oil: amzn.to/38XxJnZ
Tools & equipment used in this episode:
WERA Screwdriver: amzn.to/3WWN3sZ
HAZET Set: amzn.to/3X75co4
Knipex Tweezers: amzn.to/3WYnZ4K
Knipex Plier: amzn.to/3oWXtMB
PROXXON Torque Wrench: amzn.to/3qZF3G4
BGS Valve Spring Compressor: amzn.to/42DlENQ
Pressol Oiler: amzn.to/3J2gQLa
Some of the links in the description are affiliate links. This means if you click on the link and purchase the item, I will receive an affiliate commission at no extra cost to you.
__________________________________________________________
Follow me also on Social media to keep up to date with videos and behind the scenes.
✘ IG ⇒ @kunique.projects
__________________________________________________________

[@Lot76CARS]

Excellent, not a small job. Good to see you back!

[@KUNIQUE]

Thanks my friend!

[@Heyitsjohnwayne]

Really like your videos man. Just purchased a 1991 190e 2.6 and I'm having fun working it.

[@KUNIQUE]

Thanks for the feedback! Enjoy your 190e!

[@ersinvurucu8964]

Thanks for the video mate. Always helpful 🙌

[@KUNIQUE]

Thanks Bro! 🙏🏼

[@ardn2014]

Thanks for this video I have the same trouble with my 2.0L carb, really appreciate the help !

[@KUNIQUE]

Thanks for the feedback and support. Im happy to hear that this was helpful!

[@bjornriedel9886]

Literally gonna do this next week, thanks!

[@KUNIQUE]

You won’t regret it. The car runs much better. Good luck mate!

[@dinispaulino7512]

Nice job! Loved the intro ahah. Is the compressed air in the cylinder so that the valve doesn't fall down?

[@KUNIQUE]

Thanks Dinis! 😃 That’s correct.

[@TheMattias99]

Is it possibile without compressed air? Making sure the piston is in the dead top position isn't enough? that should prevent valve from falling down.

[@twinpacifique269]

What pressure did you put into the cylinder ? Thanks

[@991106kk]

Nice video! Any more ideas about burned oil in an M102 2.0L engine? My W123 needs about 0.5L/1000km when driving at motorway speeds. I find it too much as compared with my W124, also with an M102 2L which doesn't need oil refills at all in between oil changes. There is no leak and the oil consumption increases substantially when going at higher RPMs. Head gasket? It hasn't even 200k km.

[@KUNIQUE]

Thanks for the feedback! Unfortunately I have no idea what it could be. Maybe piston rings or also valve steam seals?

[@timebadlyspent]

great video. Thanks!

[@KUNIQUE]

Thanks Mark!

[@r3FMusic]

It's been a long time.. Thanks for the video. Bu arada 21 kilo tork vurdunuz doğrumu duydum? Birde genel anlamda bakım talimatlarının verildiği kitapçık linki bırakmışsınız. ''So wird's gemacht'' bu kitapın içinde acaba M102.963 motor için ayrıntılı motor tesisatı bilgisi varsa bende temin edebilirm.. Bendeki araç W124 olduğu için motor yapısı W201 ile uyuşuyor fakat W124 için detaylı bir kitap yok. Varsada içinde M102.963 için bir şema bulamamıştım.

[@KUNIQUE]

Desteğin için ben teşekkür ederim Refik! Evet, vidaları çapraz şekilde 21 Nm ile sıktım. Kitaptaki bilgiler W201’de kullanılan tüm Motorları ele alıyor. Bilgiler genelde aynı ama Motorlar arasında fark varsa, onu belirtiyor. Bildiğim kadarıyla W124 modeli içinde bu kitaptan var. Fakat içindeki bilgiler nasıl onu bilemiyorum. Bide kitaplar Almanca. Farklı dilde var mı bilmiyor.

[@fabiomota6124]

Nice video . Wtf you are son of jack sparrow😂

[@urbanturbine]

Nice work. i have a 300TD with om603. I think i have to do the same job soon as my engine seems to be using quite a bit oil. It seems like the procerude will be about the same. Ayrica ABD'den selamlar! :)

[@KUNIQUE]

Yorumun için teşekkür ederim. Şimdiden kolay gelsin ve Almanya’dan ABD’ye selamlar! 🙂

[@danielc6106]

Very good work. Is that a Renault Twingo under the cover?

[@KUNIQUE]

Thanks Daniel! How do you know that? 😂

[@JohnBers0176]

For algorithm 😅 good job, my friend

[@KUNIQUE]

🙏🏼🙏🏼🙏🏼

[@giusemancuso]

i have done the same job but without result, piston rings was worn out

[@KUNIQUE]

Did it help after replacing the rings?

[@mehmetalpdogan3137]

Hallo, ich habe auch einen 190e 1991bj 1.8benziner. Ich habe kaltstartprobleme war schon bei vielen Werkstätten bei mir in der nähe sie konnten mir leider nicht helfen. Könnte ich dich wenn möglich kontaktieren? Wäre sehr dankbar wenn du mir helfen könntest🙏

[@KUNIQUE]

Merhaba Mehmet, instagramdan mesaj atabilirsin. Oradan konuşabiliriz.

[@twinpacifique269]

What pressure did you put into the cylinder ? Thanks

[@twinpacifique269]

What pressure did you put into the cylinder ? Thanks