Thank you Leah! You always give great instructions that are very easy to understand. I’m thankful you are showing this on a hoop frame.
@LeahDay2 ай бұрын
You are so welcome!
@jennystrahley9274 ай бұрын
Nice demonstration!
@LeahDay4 ай бұрын
Glad you liked it!
@dreamdanzzer5 ай бұрын
THANK YOU SO MUCH for this! I am just learning the basic program with plans to upgrade later this year.
@LeahDay5 ай бұрын
Glad it was helpful!
@JanetGeorge-jq2yg4 ай бұрын
So appreciate your making this great video!! I've about worn out the link sharing it 🙂
@LeahDay3 ай бұрын
Thank you so much for sharing!!
@JackieDannenbergАй бұрын
I’m getting a new Grace 21” quilting machine with a 12 foot frame. Do you have a video of how to do the computer operations for a frame that you don’t have to shift the quilt sideways ? Obviously, it has to be rolled down but I’d like to see how it works with a 12 foot frame. Thank you !
@LeahDay26 күн бұрын
No, a 12 foot frame only advances the quilt by rolling onto the rails. Rolling rail frames are not Hoop Frames - you do not advance side to side. 130 inches wide is the maximum sized quilt you can load on your frame, and that really is the biggest size quilt you'd ever want to put on a bed!
@TheDragonflyStitchery4 ай бұрын
Hi Leah - thank you for the video! I had QCT5 Pro and just did my upgrade to 6 Pro. I don't see the new pattern folders for Leah designs or Karla designs. How do I get those?
@LeahDay4 ай бұрын
Their should be a new folder within your QCT called Edge to Edge or E to E. Those are the new designs. You can also change your software level (button lower right corner) to QCT 6 to use this version of the software.
@TheDragonflyStitchery4 ай бұрын
@@LeahDay Leah...thank you so much!. I missed the new folder name...I have them all...they are great!
@tinabias82014 ай бұрын
Can you demo how to work through QCT6 plus? I upgraded from basic and it isn't the same. Or at least give me a link for a good tutorial, I couldn't find one. Thanks
@LeahDay4 ай бұрын
QCT 6 Plus is the same as QCT 5 Beginnings - so any tutorial for QCT 5 Beginnings will work for what you're using now. Also with you software, you can change the level down to QCT 6 at any time to use the method shown in this video.
@cindialexander62503 ай бұрын
I updated to QTC 6 pro but mine doesn’t show edge to edge when it first comes up. Did that come up first on yours?
@bettytraud86313 ай бұрын
I am so excited to receive my QTC 6 !!! Hubby purchased it as Mother’s Day gift. I m just wondering how long it will take to install the system on my continuum 2 frame?
@LeahDay3 ай бұрын
It takes me usually 1-2 hours to attach QCT to a frame. I'd give yourself plenty of time and also know that you will have lots of additional brackets that you won't need. Either leave them in the boxes or put them all in one box you can use if you change frames in the future.
@bettytraud86313 ай бұрын
@@LeahDay Thank you!
@lisasquiltingcorner5 ай бұрын
Hi Leah, Thank you for this tutorial, it was just what I needed. I do have a question. You stated if you want more design to upgrade to QCT 6 Plus. Is there no way to purchase designs and add them to your QCT without upgrading?
@LeahDay5 ай бұрын
Nope. Importing designs is a QCT 6 Plus and higher feature. The main reason is QCT 6 only allows edge-to-edge quilting. If you imported a design that didn't work edge to edge, it might break something!
@misewhot57805 ай бұрын
Did you reload this quilt to sew the right side of this quilt. I’m not following you. Do you have to reload for each row.
@LeahDay5 ай бұрын
It depends on your frame and your machine. If you have a rolling rail frame and a larger longarm, no, you’ll be able to quilt multiple rows before advancing the quilt. On my Little Rebel and the Cutie Breeze frame, I advance the quilt side to side to quilt an entire row, then advance the quilt forward (rolling it up in the coil clamps) to reach the next row.
@margaretsmith806619 күн бұрын
How do you attach the software to the little rebel? Do you need a special tray for the machine to run on its own.
@LeahDay15 күн бұрын
QCT 6 was made for the Little Rebel so you just need to add the usual hardware to your frame - the motor plate, drive belts, and tablet bracket are all included with QCT 6 - leahday.com/products/quilters-creative-touch The only thing you need in addition is a compatible Windows based tablet and I include my recommendation on the page linked above.
@sherrylesina72245 ай бұрын
I enjoyed the tutorial although I don't have a long arm. One day
@LeahDay5 ай бұрын
Keep in mind that I’m using a Little Rebel in this video. It’s a home sewing machine that looks like a longarm! LeahDay.com/Rebel
@gretchenpoffenbaugh295 ай бұрын
I have a Juki 350 Miyabi longarm on a 7 foot Grace virtuoso frame. Is this the system I would use if I wanted to do computerized quilting?
@LeahDay5 ай бұрын
You will need to reach out to a Juki dealer about this. I’ve had issues in the past with helping customers put QCT on these machines because I’m not a Juki dealer. And I can’t advise on compatibility on this either with this specific machine.
@gretchenpoffenbaugh295 ай бұрын
@@LeahDay Thank you !
@nevillepearson22493 ай бұрын
We have a Q'NIQUE 21 R with QCT6 AUTOMATION. We are finding that after shut down at night time and entering a set up for a new quilt in the am the machine is sometime very slow. Is there a certain sequence in which to shut down the set up so it maintains its speed in the next morning???
@LeahDay3 ай бұрын
I have this setup too and haven't experienced this. I think it's probably your computer tablet running the software. I'd delete as many apps off the tablet as you can and also put it into Airplane mode so it can't automatically update on you while running QCT. Tablets can get tricky with updates and virus scans so check your settings on these things and turn them off or delay for a time you're not using QCT.