Learn Fusion 360 in a few hours. Part 1

STOP!! This video is now updated and revised. Go to my channel and find the latest version of this tutorial which is done in the current version of Fusion 360. Here it is:- / @arnoldrowntreeteaches...
Click this link to download the drawing and then print it off so that you can follow along and see the dimensions and the shape you're modeling. mailchi.mp/07adc6c270fd/parto...
WATCH NEXT: "User Interface Update to the 16 Basic Tutorials" • Fusion 360 User Interf...
Buy Me a Coffee buymeacoffee.com/arnoldrowntree
Patreon / arnoldteaching
This is the first of sixteen parts where you will learn Fusion 360. All totaled up that's a few hours to learn the basics of the sketcher and how to complete the common features of most simple engineering parts.
It is an effective way to learn Fusion 360, start with the most simple and work your way up with me to some more complex ones.
Download Fusion 360 here: www.autodesk.com.au/products/...
See the Future Engineering Facebook page here: / futr.engineering
See the Future Engineering website here: wordpress.com/view/futureengi...
If your install of Fusion 360 seems different to mine, you might like to check your Preferences to see if they are set the way mine are: • Fusion 360 Preferences...
I've taken hundreds of students through these exercises in a wide variety of CAD programs. Fusion 360 is a good one, see my other videos, especially the survey of the CAD market, top to bottom.

[@sabrinal.5775]

List of differences in new AutoCAD interface: 3:14 Trim tool is under the Modify menu bar 4:36 Exrtude is the 2nd icon (next to create sketch) 5:55 Click create sketch icon, and then click center diameter circle (3rd icon from left) 6:53 Constraint options are underneath the Constraints menu bar (next to modify) at the top of the screen. To use the concentric constraints tool, you don't need to use the shift key - click the concentric constraints tool, and then click on the edge of the shape & then the circle 7:46 Click "finish sketch", and then click extrude (2d icon next to create sketch)

[@kinififigueroa]

the true hero

[@snhly9120]

... thank u sooooo much

[@PatchBOTS]

You da real MVP

[@andyevans3500]

Sabrina L. J

[@kerrycorcoran4885]

Thank you!!

[@metalsmith11]

FINALLY, a video that shows ALL the little parts of 360 that other video misses THANK YOU SO VERY MUCH!!!

[@arnoldthepotter]

You're welcome, Hershal, keep learning.

[@shank2340]

Just the first video gives me confidence that he knows his stuff and knows how to teach it. Ive been struggling with FreeCad but now I know Fusion will be the tool for me. Thank you!

[@ArnoldRowntreeTeachesFusion360]

Happy to help!

[@TheHallway7]

And he speaks very understandable English.

[@secondplace]

there are plenty of tutorials on youtube for fusion, this one is the best i've found. many of them are older and use older software that looks different which makes it difficult. Thanks so much for posting these!

[@ArnoldRowntreeTeachesFusion360]

You're welcome, secondplace. Mine are over a year old now and the Fusion 360 UI has moved on but I'll put together one or two bits and pieces by way of an updater to my series.

[@hereandgoneagain704]

Wanted to show appreciation, this video got me started faster than any other tutorial.

[@ArnoldRowntreeTeachesFusion360]

Thankyou Kept Walking, that's very encouraging. All the best for your future projects.

[@corbandallas8644]

Me as well. Thanks!

[@daveturner5133]

Ppl

[@thesauceboss5995]

I just finished the 16 part series on modeling in Fusion 360. I just wanted say that this is one of the best beginner courses you will find on KZbin. The videos are a good length and you learn new techniques in each video. Thank you for making this Arnold and I look forward to watching more of your videos.

[@ArnoldRowntreeTeachesFusion360]

Thankyou SauceBoss!

[@Imgexvideotool]

I finally finished my Part 1, my computer did great. With your clear step by step and the knowledge I already have about Inventor, everything was smooth and straighforward. Thanks.

[@ArnoldRowntreeTeachesFusion360]

Good news, imgexvideotool!

[@collinpalian1803]

After having used Fusion 360 for about 8 months, I would still definitely recommend this channel for any beginners who have little or no experience. These tutorials have a good pace which covers the basics and quickly advances you to a functional level to begin working on more advanced tutorials. In all, these tutorials took me about 3 hours, and I was able to walk away feeling more confident about my ability to perform the fundamentals in Fusion 360 which includes sketching and basic 3D object manipulation (extruding, revolving, etc.).

[@ArnoldRowntreeTeachesFusion360]

Thanks Colin, that's encouraging.

[@Reidy82]

Using fusion 360 for the first time after building myself a 3d printer. Your tutorials helped me get to where I want to be much quicker than any other tutorial on youtube. I can now make my own parts to suit my own ideas. Thankyou.

[@ArnoldRowntreeTeachesFusion360]

Great news, David!

[@AsterDreamweaver]

Thank you for these clear and concise introduction tutorials. The last 3D design work I did many years ago was old school with Cartesian coordinates not relative and wrapping my head around the style of Fusion 360 was frustrating. Your video series has been an excellent view into how this tool should be used seeing it in action.

[@ArnoldRowntreeTeachesFusion360]

Great to hear! Let me know if you have any particular questions Aster D.

[@daveb2205]

I just finished all 16 lessons, thank you Arnold! The interface has changed since this series was created - but woth persevering with it, I managed to work my way thru ok!

[@ArnoldRowntreeTeachesFusion360]

Great job! Congratulations on getting through them Dave. If you are still keen there is an intermediate series, you can find out more about them in this video, see timestamp 3:05 kzbin.info/www/bejne/aIicg2ygar51fZI

[@scottfarndell2434]

I’m converting from sketchup as looking to do cnc routing and 3d printing. In 10 minutes you’ve shown what’s taken me weeks to figure out in sketchup. Great tutorial, well structured and well taught. Looking forward to watching the rest.

[@ArnoldRowntreeTeachesFusion360]

Glad I could help! Sketchup is my second favourite program, I worked with it for some years on architectural drafting and enjoyed it. For the ongoing industrial revolution though, you're in the right place now.

[@kpare]

I have watched a ton of videos on fusion 360. Your teaching style is exactly what I needed. Thank you.

[@ArnoldRowntreeTeachesFusion360]

Thanks kpare, welcome to the channel, take a look at the video about the User Interface update and let me know if you have any questions or problems. The resources about the UI update are at timestamp 2:38 in this one kzbin.info/www/bejne/aIicg2ygar51fZI

[@practicemakesbetter7132]

I watched all 16 of your videos, I learned a lot about Fusion 360 and drafting, you are a gifted teacher. Keep up the great work!

[@ArnoldRowntreeTeachesFusion360]

Thankyou PMB, I'm encouraged!

[@stevenrichardson7882]

Glad I found you, this is my box set for the next 15 episodes, keep them coming 👍

[@ArnoldRowntreeTeachesFusion360]

Welcome aboard! They are coming Steven, yesterday I uploaded #1 intermediate tutorial and more are lined up.

[@brennansherman881]

Thanks. I have been searching for tutorial videos the last week and I liked this one the best by far. I had some questions and found you had already answered them for other people in the comments! Great job. Subbed and liked

[@ArnoldRowntreeTeachesFusion360]

Glad it was helpful! Be on the lookout for questions as they occur to you.

[@salemthegreat9984]

Thank you so much for this! I am a complete beginner to CAD, but need it for my studies. I have spent the whole day watching video tutorials posted on the official Fusion website, but still was beyond struggling. After watching your video, Fusion does not seem that scary anymore and I am starting to enjoy it! Thank you for sharing your knowledge!

[@ArnoldRowntreeTeachesFusion360]

Glad it was helpful! and thanks for sharing this. You might find the UI update video helpful too which is here:- kzbin.info/www/bejne/h6rWfHR6qtR1j8U

[@MannyCamRS]

Hello Arnold. I have tried every tutorial available on KZbin. I am a beginner and almost quit until I came across your video series. I can't believe I was able to complete Part 1 of 16 of this course. You give me hope. Thanks so much and continued success.

[@ArnoldRowntreeTeachesFusion360]

Thanks again Manny, you're a determined learner. You'll get there.

[@907jl]

Just wanted to say thanks mate! Made my very first CAD drawings thanks to you! Looking forward to the rest of the 16 part series.

[@ArnoldRowntreeTeachesFusion360]

Good on you Jeff, let me know when you need anything.

[@henrikandersson1924]

Just did the 16 parts. The videos are nicely structured so that you are learning at a good pace without feeling confused. Thanks for a great course.

[@ArnoldRowntreeTeachesFusion360]

Thank you Henrik! are you in northern Europe?

[@henrikandersson1924]

@@ArnoldRowntreeTeachesFusion360 Yes, I am in Sweden.

[@infinitesoulluos]

This is an excellent series, after just the first tutorial I got a handle on the basics within short order having only just downloaded Fusion. Great stuff Arnold, thanks much for your time & effort, it is a super demonstration of sharing of knowledge & is much appreciated. PS: it was a little tricky trying to follow you using the newer version but I hacked it and look forward to watching the Interface Update series.

[@ArnoldRowntreeTeachesFusion360]

Good on you Kelvin, yes the software has been updated and a few tools are moved. Its not a huge change and the UI update video will get you going. Here's a new video I just published about how it all works here. kzbin.info/www/bejne/aIicg2ygar51fZI

[@kensimolo860]

Thank you making these videos. The time and effort you put into them is greatly appreciated!

[@ArnoldRowntreeTeachesFusion360]

Good on you Ken, keep an eye out for a new series.

[@bradyjmify]

I used this series to learn fusion 360 a few years ago! I'm now helping people on projects and have a few prototypes built of tools I use. I'm so glad I scratched the itch and learned fusion 360!

[@ArnoldRowntreeTeachesFusion360]

That's music to my ears Brady, thanks. One thing though, I see you're commenting on the original Part 1 tutorial. Have you seen the revised ones? kzbin.info/www/bejne/goS1fH2dibiGasUsi=4TL3nMudwnRyi-1W

[@danmccurry3810]

Glad I found this tutorial, I would recommend this to all aspiring to learn this designer software from scratch!

[@ArnoldRowntreeTeachesFusion360]

You're a gem, Dan.

[@davey3765]

I gave up on Fusion 360 (student) for over a year and just stuck with TinkerCAD to design some VERY basic shapes, but now my shapes are a slightly more complex and this video I learned the basic tools by just getting started and following along, I learned so much more. Great tutorial! My biggest problem was using sketch.

[@ArnoldRowntreeTeachesFusion360]

How's it going now Davey? Watch a few of the early tutorials and see how there are two main modes in Fusion; sketch and feature. You'll be switching between these two modes and it will be second nature with practice.

[@geterdun57]

Just finished my first part. Excellent video. Thanks for taking the time to make this. Ill be running through whole curriculum.

[@ArnoldRowntreeTeachesFusion360]

Welcome Blake, and thankyou. Get onto the next one in the playlist "User Interface Update to the 16..." just in case the changes throw you.

[@Mobin92]

Good tutorial. Not too fast, nor too slow. Shows all the basic workflows and tools in 10 minutes.

[@simonbowes6663]

I started these tutorials with a very low expectation in picking up what looks and I am sure is a very complex design software. I have very poor health and needed something to learn during “Lock down. Version 2” this knowledge will be a great addition to my 3d printing. Well I am know on “Part 7” and I can’t believe how I am picking things up. Learning the short cut keys etc. This is credit to the fantastic tutorials , they are so well presented and long enough to give you head a shake before picking up another tutorial. I am very appreciative that these are actually free tutorials and perfect for any beginner. I love the fact they are straight to the point , clear , concise and enjoyable. All I say is “ thank god for the pause button and rewind” 😂 I am intrigued to know if all these parts make something ? But not bothered if not , as they seem to be designed to ensure they cover the main elements elements of Fusion 360. Thank you great work

[@ArnoldRowntreeTeachesFusion360]

Congratulations on your progress so far Simon, let me know if that pause and rewind button gets worn. Its too bad I didn't come up with some parts that could be put together but after the 16 there is another playlist of intermediate tutorials on my channel that does take you through assembly modeling basics.

[@shtmouth]

Thanks a million!!! You are the first teacher I was able to understand. Didn't even have a problem with using a later version of Fusion 360 than what is being used in your video's. I Can't Thank You Enough!

[@ArnoldRowntreeTeachesFusion360]

Good on you Phil, I'll be revising them asap but did you see the other video I made called "User Interface Update to the 16..." kzbin.info/www/bejne/h6rWfHR6qtR1j8U

[@shtmouth]

@@ArnoldRowntreeTeachesFusion360 Sure did, on the Top Down Assembly video now. Began it this morning.

[@billlattimer3841]

This was extremely helpful for me, thank you. I've looked at a number of video series, but this approach is very similar to how I learned drafting to begin with. I am struggling a bit with the dimension tool, specifically changing extrusions, but I'm sure we'll fill in the blanks. A great approach for learning the fundamentals, looking forward to the rest of the series and beyond!

[@ArnoldRowntreeTeachesFusion360]

You're very welcome! Congratulations on a good start, you'll soon be using this like all the tools you're already familiar with and your experience will be an advantage.

[@mikesfarmmikesfarm3977]

You are a excellent instructor. I have decades of acad exp. I watched the whole series and you made it easy. I have been drawing a lot of practice dwgs off the web. I use 360 now for 3d printing, vector dwg for my laser and hope to get a cnc router soon. Just retired but still love to mech draw and design. Thanks for sharing

[@ArnoldRowntreeTeachesFusion360]

Great to hear! I have no doubt your experience will give you a head start on so many others. Your farm will soon be full of inventions and artifacts. Keep going.

[@michaelnear2039]

Having used Solidworks and Inventor, the process functions are very similar. However, everytime there is a new software, the landscape changes and learning where the tools are is VERY helpful. This video is direct, straightforward and the presenter uses absolute economy of words and mouse clicks to get right to the point. 5 stars!

[@ArnoldRowntreeTeachesFusion360]

Wow! Thanks Michael. When I revise and update the 16 basic tutorials they will be even better. It sounds like you've been able to find those few tools that were moved when the UI was updated but if you are having any trouble with that at all I've got another video in the same playlist titled "User Interface Update to the 16..."

[@heySazuno]

As a complete beginner, you have PERFECTLY accomplished what you set out to do in this video. Thank you so much sir! now on to part 2!

[@ArnoldRowntreeTeachesFusion360]

Thanks, actually I think there is some room for improvement, but I'm so glad its working for you. How will you use Fusion 360 in the future? All the best for the journey!

[@heySazuno]

@@ArnoldRowntreeTeachesFusion360 I'm actually using it to make jewelry, so I found this really relevant either way , more useful than anything else I've seen so far❤

[@learnitalready]

Hello Arnold! I just checked out your channel because apparently you recommended our channel to one of your subscribers. Thanks so much. Great job with your channel too. I appreciate the way that you explain things slowly and simply for new learners. Hope to see more from you soon.

[@ArnoldRowntreeTeachesFusion360]

Thankyou LIA! I've got stuff in the works but production is a bit slow these days. But yes, lets talk. Please write to me through the Contact page on my website here:- futureengineering224170208.wordpress.com You'll also see the newsletter issue that I wrote about your channel. I would appreciate the opportunity to correspond briefly.

[@learnitalready]

@@ArnoldRowntreeTeachesFusion360 Thank you so much. I will contact you soon as requested.

[@ukaszad3469]

Thanks to your videos, I was able to start working with fusion 360 and your English pronunciation is music to my ears. Thank you very much.

[@ArnoldRowntreeTeachesFusion360]

Its amazing how accents and cultures work. Did you know that there is a much better revision of my first tutorial? Here's the link... kzbin.info/www/bejne/goS1fH2dibiGasU

[@ericlauryssen6451]

Thanks for the tutorial from Fusion 360 it opens a complete new world of CAD to me and it gives me confidence to learn mastering it once.

[@ArnoldRowntreeTeachesFusion360]

You're very welcome! Please ask any questions eric.

[@MohamedAhmed-wz9ws]

absolutely better than any other tutorial video I have seen earlier... as a highly passionate about 3D printing and designing, this will be my starting point

[@ArnoldRowntreeTeachesFusion360]

Fantastic Mohamed! Welcome to the channel. Be sure to find the revised version of this first tutorial in the basic series, this one is the older one, here’s the newer improved one:-

[@ArnoldRowntreeTeachesFusion360]

kzbin.info/www/bejne/goS1fH2dibiGasUsi=vQGaeerhl_edNtA5

[@astroknott5877]

Thanks. This is the easiest to follow fusion 360 tutorial I have seen so far.

[@ArnoldRowntreeTeachesFusion360]

Good on you Astroknott, keep going!

[@Hattinchannel]

You are the best instructor out there straight to the point

[@ArnoldRowntreeTeachesFusion360]

Thankyou!

[@jasonsanders2271]

An awesome set tutorial videos. Well paced and the repeating of instructions and shortcuts helped loads. Thanks!

[@ArnoldRowntreeTeachesFusion360]

I'm glad to hear they helped! If you have the patience, Jason, you might find some of the other tutorials interesting. Here's the playlist page, see how you go with the intermediate series but I think it will help a lot if you do the Bodies and Components playlist first. www.youtube.com/@ArnoldRowntreeTeachesFusion360/playlists

[@skidz8426]

I just want to say I liked and subscribed because I love the fact you said if you don’t like me you can unsubscribe but I’ll try to make it worth your time. Thanks you very much worth the 10 min.

[@ArnoldRowntreeTeachesFusion360]

Welcome aboard Brian!

[@radicalrick9587]

I've learned more in one lesson from you than hours from Fusion lessons. Because you are showing us how to design with a purpose as opposed to just showing us how to doodle (using different tools) with no purpose! With your lesson, we can remember why and how we use a/this tool and so on. So thank you very much for taking the time to teach me/us how to design things and for what reason! You're my personal Bob Ross, "There are no mistakes only happy accidents".

[@ArnoldRowntreeTeachesFusion360]

Thanks RR, I'm glad you found me, that's a happy accident!

[@radicalrick9587]

@@ArnoldRowntreeTeachesFusion360, It sure is!😊 I've downloaded all 16 projects. I'm really looking forward to completing each and every course. Let the games..err classes begin!

[@alanegan8909]

Really helpful. Easy to follow and to the point. Looking forward to the rest.

[@ArnoldRowntreeTeachesFusion360]

Good on you Alan, let me know if I can help with anything, we all get stuck on new software now and then. You've probably seen this video already but please take note of the resources to help with the UI update. kzbin.info/www/bejne/aIicg2ygar51fZI

[@frankbarlow3154]

Thanks !! I'm waiting for my cnc router to arrive and your tutorial is super helpful.

[@ArnoldRowntreeTeachesFusion360]

How exciting Frank! Yes, CAD is a great tool to have with a CNC router. Your attention is going to be pretty much taken up but it might help you to look at the other video in the same playlist titled "User Interface Update to the 16..." since a few tools have been shifted kzbin.info/www/bejne/h6rWfHR6qtR1j8U

[@toddwharris]

You get to the point of designing and learning, and I like that. Thanks!

[@ArnoldRowntreeTeachesFusion360]

You are welcome!

[@jungoogie]

Thanks for taking time to make these tutorials 👍.

[@ArnoldRowntreeTeachesFusion360]

You're welcome Bradock

[@RobLSmit]

Very good explanation. As i have a other lay out of fusion 360, i have to look around for some things. I just keep exercising this part... then up to the next. Thanks so far!

[@ArnoldRowntreeTeachesFusion360]

Great to hear! Keep going Rob. Did you see the video in the same playlist titled "User Interface Update to the 16..." There are just a few tools that have been moved and this can help. Also if you scroll down in the comments you'll find a very helpful one by SabrinaL. Please ask any questions when you get stuck - we all get stuck now and then.

[@dalerogers1134]

Thank you for creating this series!

[@ArnoldRowntreeTeachesFusion360]

My pleasure Dale

[@AWSInsightHub]

Excellent! I struggled a bit but that was my fault on doing wrong measurements re-did it again and breezed through in creating my very first design Thank You sooo...much

[@ArnoldRowntreeTeachesFusion360]

You're off to a good start Mohammad. Did you have any trouble with the User Interface update? There are a few tools in different places now. I've got another video to help with that. kzbin.info/www/bejne/h6rWfHR6qtR1j8U

[@summerhillcampers9623]

really appreciate your video and clarity of instruction, many thanks, Dan

[@ArnoldRowntreeTeachesFusion360]

Glad it was helpful!

[@rrswitch48]

Great tutorials! A few of the functions have been changed but I finished lesson 1 ! Nice instructions!

[@ArnoldRowntreeTeachesFusion360]

smith-models, that's on my mind quite a bit lately. In the meantime find the video in the same playlist titled "User Interface Update to the 16..." Also scroll down in the comments to find a comment by Sabrina L. which is very helpful.

[@SNIPER-my1vo]

thank you. I am a 6 year vet of blender and i been wanting to learn this because i can extend my modeling skills over to fusion and do all my toolpaths in one place

[@ArnoldRowntreeTeachesFusion360]

You're welcome SNIPER, Blender will come in handy for all the things it can do so well. I've looked at Blender occasionally and been very impressed with its capabilities. Adding Fusion 360 to your toolkit will be awesome.

[@AutoBeta2T]

Just started today - really enjoyed and my part looks the same as yours so it must have worked! Cheers.

[@ArnoldRowntreeTeachesFusion360]

Nice work! Keep learning rgv

[@piggybladder]

Good tute cobber. So good I'll have to do the next 15 and decide whether I want Fusion 360 or DSM

[@ArnoldRowntreeTeachesFusion360]

Thanks pb, I just took a look at DSM and it looks pretty good. I used to be really keen on SpaceClaim before ANSYS bought them out. DSM is based on SpaceClaim. Its a direct modeler as opposed to parametric CAD however I'm pretty sure that any time you spend on one will only help you to understand the other. Since you can have both for free there's probably no pressure on your decision.

[@renn3908]

Hi Arnold ,I've just joined your teaching of fusion360,thank you,I find them very helpful and easy to follow. I've got a few engineering drawings to make and this is a great help. Dougg.

[@ArnoldRowntreeTeachesFusion360]

Thankyou Dougg, welcome to the channel! You’ll find there is a revised version of this video, here is the link to the Playlists page, scroll down to the 16 Basic Tutorials playlist and you’ll find them all in sequence. Let me know if you have any problems, I can often help.

[@ArnoldRowntreeTeachesFusion360]

youtube.com/@ArnoldRowntreeTeachesFusion360?si=cPFfhFuG1_aUsV1B

[@robertbankhead8661]

Excellent, and thank you for doing this!!!

[@ArnoldRowntreeTeachesFusion360]

My pleasure Robert! And how will you be putting Fusion 360 to work later?

[@ComeAlivewithMK]

I LOVE THIS VIDEO!!! You’re help is Awesome!!!! Thank you so much for all your clarification!!! This is just super great!!!! Look forward to the rest! And the key was starting from the drawing!!!!

[@ArnoldRowntreeTeachesFusion360]

Thanks, glad it was helpful. Let me know if you have any questions.

[@paulgreenlee190]

I'll have to watch and duplicate your moves to get them down, you made it look easy. I did enjoy learning and plan to view the other 15 lessons. Thanks

[@ArnoldRowntreeTeachesFusion360]

Its a great time to learn something new Paul. Come back to me if you get stuck (and we all get stuck in the beginning!)

[@paulgreenlee190]

@@ArnoldRowntreeTeachesFusion360 Well I appreciate that Arnold, I am disabled, screwed up surgeries left me with Adhesive Arachnoiditis, major nerve issues. 23 surgeries and growing I don't have the mind set to do things without writing things down. At one point in my career I taught the maintenance side of SAP, talk about the need to have a good memory. I can be looking at 4 numbers on a piece of paper and turn to the side to write them down and forget 1 of the numbers every time. I know you are thinking what a nut case I have run into, I don't mind one bit. It's the best I can do so I deal with it. Your method of teaching helps me, I also watch Paul McWhorter teaching Fusion 360. Sometimes I need a different pace and yours is snappy and quick which keeps your attention. I'll take some time and watch yours over again and then pull up Fusion to follow along. I subscribed to your channel so don't count me out, I'm used to being at the end of the line. You have to deal with life so it helps you and keeps your mind sharp. Looking forward to learning all the lessons.

[@papadiouf5204]

thanks a million, you make it look easy. I'm looking forward to watch all videos

[@ArnoldRowntreeTeachesFusion360]

Welcome Papa Diouf, let me know if you have any problems as you go. Also take a look at another video in that same playlist titled "User Interface Update to the 16..." which might help with a few of the tools which have been moved since the tutorial was published.

[@c3ogy265]

Great Video, the software interface has changed a little bit since this video was released but even so was still able to find every thing. I'm looking forward to following the rest of the series.

[@ArnoldRowntreeTeachesFusion360]

Thanks c3ogy... welcome. Yes, the UI was updated and I need to revise these. I did a video titled "UI Update to the 16..." here:- kzbin.info/www/bejne/h6rWfHR6qtR1j8U There is also a short where its done in the new UI in 60 seconds and you can set the KZbin player to 25% speed and get it at the normal pace. kzbin.info/www/bejne/kKmveK2VhKdnY68 Let me know if you have any questions as you go.

[@frankgoes]

Did you also lost the sketch tool in the first serie after saving the sketch?

[@ArnoldRowntreeTeachesFusion360]

@@frankgoes Its always there, when you drop out of sketch mode. If I was looking over your shoulder I'd be checking to see if you were in either mode. If you can take a screen shot when its missing you could post it on the Facebook page here:- facebook.com/Futr.Engineering

[@kurtgoodwin1135]

great start - very helpful

[@ArnoldRowntreeTeachesFusion360]

Welcome to the channel Kurt. You might find this video helpful, especially the part about the user interface changes, see timestamp 2:38 here:- kzbin.info/www/bejne/aIicg2ygar51fZI

[@wools4538]

Nice video. I plan on making all 16 parts.

[@ArnoldRowntreeTeachesFusion360]

Thanks Wools, sounds like a fine resolution!

[@keshavaaumritum1]

Excellent tutorial. Thank you for sharing your knowledge.

[@ArnoldRowntreeTeachesFusion360]

Glad you enjoyed it!

[@ArnoldRowntreeTeachesFusion360]

Actually keshavaaumritum1, there is a revised version of this tutorial, please see this one:- kzbin.info/www/bejne/goS1fH2dibiGasUsi=8WFqv7nTJB-gRUQj

[@noweare1]

Really good video, thank you.

[@tedisakoolkat]

Video is great and i just finished this, looking forward to doing all the rest. It’s a little frustrating with the updated version of fusion since everything you click on is in a different spot, but I’m figuring it out. Either way, very excited to have finished the first and looking forward to finishing the rest

[@ArnoldRowntreeTeachesFusion360]

Well done Ted, it gets easier with a little bit of practice.

[@ellewisentinc]

GREAT JOB!!! Very easy to follow.

[@ArnoldRowntreeTeachesFusion360]

Thank you!

[@samuellin9217]

loving this thankyou

[@ArnoldRowntreeTeachesFusion360]

Good on you Samuel, welcome to the channel. Let me know if you have any questions, everybody gets stuck now and then with new software.

[@iiorexoii]

Hey Arnold, good video! Only suggestion is to perhaps discuss the location of tools in the latest layout of Fusion. Also prob want to let people know about the S shortcut to search for anything. I am just getting started but have done some advanced tutorials already. Looking forward to the next 15!

[@ArnoldRowntreeTeachesFusion360]

Good point! Thanks Evan, I've made a note to mention those two items in my upcoming review of the new layout.

[@kennethkehmna1237]

OK, Part 1 done and overall, not too bad. I've been trying for a while to get the hang of this program, and this was by far the easiest lesson to follow I've found. Great job! I'm working on a Mac with a track pad that makes its a bit challenging, but I think I'll pick up a regular mouse.

[@ArnoldRowntreeTeachesFusion360]

Thanks Ken, that's music to my ears. I'm tempted to make jokes everytime I meet a Mac user but how could I do that to you? By the way, did you see the revised version of this tutorial? I would delete the old version but then KZbin would drop my channel off the search engine. Take a look here and check for a revised version for the next few. kzbin.info/www/bejne/goS1fH2dibiGasU

[@kennethkehmna1237]

@@ArnoldRowntreeTeachesFusion360 Arnold, thanks for the heads up. I just now noticed the revised versions with Part 3, so I should be tracking correctly now. Jokes are more than OK. I got used to working on Macs in the Bay Area in California (you know, when in Rome), but it seems like everything is just different enough to be "interesting."

[@jesusvelazquez1359]

Thank you for sharing us Sr, Your video tutorial is very helpful to develope our skills to design solid drawings and machining in a cnc machine Best regards from Acuña Mexico

[@ArnoldRowntreeTeachesFusion360]

You are most welcome, Jesus and welcome to the channel. My son recently married a Spanish speaking lady and his Spanish is coming along she tells me. Mine is woefully inadequate though. Thank God for English in the meantime! Let me know if you have any trouble with the tutorials, everyone gets stuck here and there and all the best with your goals and plans for CNC.

[@stevebae2595]

You know your stuff and sure know how to make learning easier.

[@ArnoldRowntreeTeachesFusion360]

Thanks Steve! What will you use Fusion 360 for?

[@colemine7008]

Yeah I did it!.. stumbled around a bit when changing circle diameter. Thank you Sabrina L. for change list.

[@ArnoldRowntreeTeachesFusion360]

Well done sc800, keep at it.

[@glj100]

So I tried this and was really happy it was not a real dummy's format, it needed some thinking about and repeating but it was the best method I have come across and having to work out the ,new menus was good for learning, onto part 2!

[@ArnoldRowntreeTeachesFusion360]

Good job glj100, keep going! I'm working on some updates to help with the new UI.

[@monjier]

Holy crap. This was so useful. I'm working on a project and was unable to start because it required learning CAD skills. This was super helpful.

[@ArnoldRowntreeTeachesFusion360]

Welcome to the channel TK. The 16 basic tutorials can give you a running start at Fusion 360 and if your project entails simple blocky and prismatic parts you'll be well set, however it does take most people some time to transition from the click by click tutorials to flying solo. There is a still a lot to learn and mostly through experience, nevertheless, its a good way to get started.

[@monjier]

@@ArnoldRowntreeTeachesFusion360 thanks for that. I've been working all day, come home to work on this project, made it to Part 6th and will call it a night. It looks like the basics won't be able to help with the complex designs I have in mind but that's okay. 2 days ago I couldn't draw 2 circles. Progress is progress.

[@colintwiss]

Brilliant tutorial Arnold especially for a first time user like me. The latest Fusion 360 which I downloaded yesterday is slightly different to yours on the video but they are minor. Thanks for this mate I was staring at a black hole till I saw your instructions. I aim to convert a model steam engine set of hard copy drawings to electronic in Fusion for better storage and visualisation in 3D. I could share them with you if you so desire once I have followed your lessons

[@ArnoldRowntreeTeachesFusion360]

Good on you Colin, that's quite an ambition! I did have a student once who I taught Solidworks and he modeled a steam loco the next year. It was a case of the student exceeding the teacher by a long way.

[@bennethos]

Great little video, got me going as well !

[@ArnoldRowntreeTeachesFusion360]

That's great TG! I hope you saw that there is a revised version of this video, updated and improved! The link is in the description below the video.

[@tonyadelano6390]

Awesome videos, thanks. A lot of problems I was having was remedied from these videos

[@ArnoldRowntreeTeachesFusion360]

Welcome to the channel Greg. What are you going to be doing with Fusion 360? I hope you saw the revised version of this and the second of the basic tutorials. kzbin.info/www/bejne/goS1fH2dibiGasU

[@tonyadelano6390]

@@ArnoldRowntreeTeachesFusion360 I have a home cnc machine shop and will be using fusion 360 to aid in design and manufacturing.

[@MrRobert6610]

That was a great tutorial, thank you! I tried learning Fusion yesterday with some other tutorials and they just didn't work for me but your tutorial does! I did have trouble with the circle constraint because the constraints have now moved to the top bar and I didn't have a clue haha

[@ArnoldRowntreeTeachesFusion360]

Good on you Robert, there are a few tools that were moved since I made these tutorials, you might find it helpful to look up another video in the same playlist titled "User Interface Update to the 16..."

[@silvermediastudio]

You can also right click for options that have been moved, they conveniently put those common commands into a contextual menu.

[@adamangiebrown]

The best tutorial I've used for fusion.

[@ArnoldRowntreeTeachesFusion360]

Good on you Adam, thanks. How did you go with the UI changes? Take a look at this video at timestamp 2:38 for some help with that if it helps. kzbin.info/www/bejne/aIicg2ygar51fZI

[@Skye_Leith]

Excellent tutorial. Much appreciated.

[@ArnoldRowntreeTeachesFusion360]

You're welcome Skye! Did you see the other video in the same playlist titled "User Interface Update to the 16..." I've also made a short in the last couple of weeks so that you can see the part made in the current UI. You'll have to slow down the KZbin player to 25% speed in order to see it in detail. Short: kzbin.info/www/bejne/r6TQYpVqmLVsbas UI Update: kzbin.info/www/bejne/h6rWfHR6qtR1j8U

[@Skye_Leith]

@@ArnoldRowntreeTeachesFusion360 Got it! Thanks!

[@DaddyDaughterHairFactory101]

I nearly gave up on fusion till I came across this video. Thank you so much!

[@ArnoldRowntreeTeachesFusion360]

You're welcome Phil & Emma and welcome to the channel. If you have any trouble with the location of a few of the tools being changed you might find it helpful to find another video in the same playlist on the channel titled "User Interface Update to the 16...." Also, let me know if you have any questions as you go, everyone gets stuck early on.

[@mussadiqshah5799]

I have been searching for tutorial videos and not a single video guide from the Engineering basic point of view and I liked this one the best by far. Can you share some more practice exercises just like that. It will strengthen our base. Thank you once again

[@ArnoldRowntreeTeachesFusion360]

Thanks Mussadiq, no doubt you've seen the next video in this series, Part #2 through 16. These will give you some repetition and practise while introducing a few new tools and ideas with each one. These 16 cover a lot of the common shapes and features in basic engineering shapes. Then you can go on to the intermediate tutorials where you can begin to assemble parts into working models. kzbin.info/www/bejne/q5jFaKCohLGLnNU

[@chriscocco5560]

Had to delete my comment, by far Arnold has the best tutorial on youtube. Thank you, liked subscribed and onto part 4!

[@ArnoldRowntreeTeachesFusion360]

Thanks Chris, that's great but keep telling me how to improve all of this. I've got a way to go quite apart from updating.

[@nzxt1234]

thank you just did part one! Btw interface looks a lite bit different i just downloaded 360 ty for the turtorial

[@ArnoldRowntreeTeachesFusion360]

Hope you enjoy it! You will only need to locate several tools which are in a new location, usually up near the top of your screen. Come back to me if any are really lost though.

[@stuart4176]

Great to get starting on this package, been looking for a way to delete folders which have been created but now no longer needed. Thought they would make that simple, i’m using a hobby version. But spending a little time watching all 16.

[@ArnoldRowntreeTeachesFusion360]

Stuart, I often find John Hackney is right onto some of these niggly things. Take a look at this one he made on how to delete troublesome files; kzbin.info/www/bejne/gHLbZ6eFfauFnNE

[@stuart4176]

@@ArnoldRowntreeTeachesFusion360 Ok will do thank you

[@ericpazder2873]

Amazing tutorial, thank youso much!

[@ArnoldRowntreeTeachesFusion360]

You're very welcome!

[@MentallFloss]

Thank you, really good lesson. good tip that is very useful to learn and get used to right from beginning if you click and drag mouse from LEFT TO RIGHT on the work area it will select anything hat is TOTALLY covered by the selection area, if you click and drag mouse from RIGHT TO LEFT as long as it touches ANYWHERE over the sketch or component, it will automatically select everything this is very useful indeed

[@ArnoldRowntreeTeachesFusion360]

Good tip MF, I've made a note to include this when I do the upcoming revisions. I'll probably put it in #2 or 3.

[@frankcruz1751]

Excellent thank you for sharing your time and knowledge.

[@ArnoldRowntreeTeachesFusion360]

Glad it was helpful!

[@ArnoldRowntreeTeachesFusion360]

Frank, did you see the revised version of this tutorial? I have improved it, see here:- kzbin.info/aero/PLFCTgdiT5-kLBNvrkUNy63Gu1tWdRuKkr

[@martybadboy]

Great! Thanks for your time and effort.

[@ArnoldRowntreeTeachesFusion360]

My pleasure!

[@melsojka1419]

After 45 years as a job shop machinist after 10 years of retirement, I am just getting started. Have a small CNC mill and so far totally lost. Great Part 1 hope I live long enough for all 16.

[@ArnoldRowntreeTeachesFusion360]

That sounds great Mel, the 16 won't take long and you've got a lifetime of experience plenty of us would die for! Be sure to watch the UI update video and let me know of whatever problems you run into. kzbin.info/www/bejne/h6rWfHR6qtR1j8U

[@mhd230289]

great video. its worth the effort you have put in. thank u

[@ArnoldRowntreeTeachesFusion360]

My pleasure! I'm glad to have you here Mohammed. I hope you saw this video on how to make good use of the tutorials kzbin.info/www/bejne/aIicg2ygar51fZI

[@mhd230289]

@@ArnoldRowntreeTeachesFusion360 Very useful and informative Thank you Arnold

[@170cuda]

Great training!

[@ArnoldRowntreeTeachesFusion360]

Thanks guys.

[@almonies]

Ok, Nice and simple. Good solid program so far too.

[@ArnoldRowntreeTeachesFusion360]

almonies, you did see the new revised version of this video didn't you? Just published a couple of days back.

[@backyardbasher]

Just completed this lesson in January 2021 and some of the interface has changed, apart from that my finished model looks exactly like yours, looking forward to part 2 :)

[@ArnoldRowntreeTeachesFusion360]

Welcome byb, yes the interface has changed but I'm glad you were able to follow despite that. I did do video titled "User Interface Update to the 16..." which is here kzbin.info/www/bejne/h6rWfHR6qtR1j8U

[@sajilj2596]

I never found such kind of fusion 360 tutorial 🙏🏿 thank you love from india🙏🏿

[@ArnoldRowntreeTeachesFusion360]

Welcome to the channel Sajil

[@jeremyelphick-pooley-desig4405]

This is the most brilliantly taught set of exercises ever! You have a great teaching style...slowly platforming your way to more complex cdesigns and allowing students toi get used to the F360 interface. My only problem was that I use a newer version of F360 and the functions have all moved around! I have to search for where F360 have hidden them now! Otherwise brilliant tutorials! My sincere thanks to you!

[@ArnoldRowntreeTeachesFusion360]

Glad you enjoy it! Be sure to ask questions when you need to Jeremy. There is another video in that same playlist titled "User Interface Update to the 16..." And also, if you scroll down in the comments you'll find some helpful notes by SabrinaL.

[@PhG1961]

Awesome video !

[@ArnoldRowntreeTeachesFusion360]

Thanks!

[@dgb5820]

This instructional video is awesomeness

[@ArnoldRowntreeTeachesFusion360]

Thanks DGB, welcome to the channel. Actually, check out the updated, revised and improved version - take a look at the whole playlist here. kzbin.info/aero/PLFCTgdiT5-kLBNvrkUNy63Gu1tWdRuKkr

[@armannbenjaminsson6427]

Thank you very much, everything went very well. 👍

[@ArnoldRowntreeTeachesFusion360]

Fantastic Armann, please yell if you have any problems with the rest of them.

[@sihamkamal1784]

Thank you very much it was so helpful

[@ArnoldRowntreeTeachesFusion360]

Welcome to the channel Siham, let me know if you have any problems, we all get stuck now and then. You might like to check the shorts which are done in the latest user interface:- kzbin.info/www/bejne/kKmveK2VhKdnY68