Learn Lychee Slicer - Grid Supports and the new bracing system

Grid supports in Lychee Slicer will help you create better supports in a faster way. However, it's a new workflow with some changes, so this video should help you master these new grid supports and see how you can combine them with the old system.
The training playlist: • Learn Lychee Slicer
Models from the video
· Korra by CA 3D STUDIOS: / posts
· Thieft by 3DSqulpts: 3dsqulpts.com/product/thief-s...
· Panther Chameleon by Fotis Mint: www.myminifactory.com/object/...
About this Lychee Slicer training
I invite you to learn about Lychee Slicer, the best companion for your 3D printer, through multiple videos covering as many subjects as possible. Everything is grouped together in a KZbin playlist, so you can choose only what interests you. Many videos will be added in the future to keep up with the latest software developments, but others will surely be updated to keep pace with changes in functions and techniques.
Don't forget to subscribe to the channel for all future videos!
About Lychee Slicer
Lychee Slicer is slicer software for resin (originally) and filament (more recently) 3D printers, designed for beginners and pros alike. It offers many functions to help beginners prepare their prints and very advanced functions for advanced users.
Download Lychee Slicer: mango3d.io/downloads/
Lychee Slicer Community
· Official Discord: / discord
· Official Facebook Group: / lycheeslicer
· Unofficial Reddit: / lycheeslicer
*My french KZbin channel*: / @polyworkshop
*My Twitter "Lychee Slicer" account*: / thomaslychee
Transparency note
I'm from Lychee Slicer team, and this is my personal KZbin channel
🔗 How to find me on social media
· Lychee Slicer official Discord / discord
· TikTok (FR): / polyworkshop
· Twitter (FR): polyworkshop.fr/twitter
· Instagram (FR): polyworkshop.fr/instagram
#Lychee Slicer #3dprinting #3dprinter

[@B2000Z]

Thanks for this. I haven't used Lychee in a few months, and I was confused about the new auto bracing and etc.

[@KenBergquist]

Fantastic intro to the new features. I can't wait to start using them!

[@LazorzPewPew]

Amazing! Thank you so much!

[@beast32678]

This support system is amazing I've had sections of the supports on large prints come off but becouse the grid allows the supports to support each other allowing for the print to be susseful 🎉

[@shavygameplays2391]

thanks a lot for the explanation :D

[@bradandteinacook3506]

It would be good if the slicer could generate calibration prints for resin exposure times. The new additions are awesome. Keep up the good work!!!

[@thomaslychee6813]

Not easy, because it means having different exposure per layer. Lychee Slicer can do it, but most file format can't handle that... :( You can't imagine how many limitations are from the file format and some fimrware limitations...

[@TinyLittles3D]

great video, will be watching this again after i download the new lychee version! Continue le bon travail!

[@PolyworkshopInEnglish]

Merci beaucoup! Thanks a lot :)

[@robwardell8278]

Fantastic new feature and really good, clear video. I’m going to have to relearn my supports but that time investment looks like it’s going to pay off in faster supporting and reduced resin. Nice problem to have ;)

[@devlaminckx3382]

Very interesting! Merci beaucoup!

[@PolyworkshopInEnglish]

I hope it has been helpful!

[@brendon6930]

You need to add an option for the height which bracings start eg. Above 10mm fir example, every support shorter than 10mm won’t get braced. Also an option to set the maximum bracing distance between supports. For example, supports that are far away could still get braced.

[@StefanMathys]

Thank you for the very nice and clear introduction! It makes sense to me now :). I'm 3DSQULPTS, sculptor of the Thief and Tiger and I wish I knew all of this when I supported it for testprinting and release. My question is, do you have a goto grid interval (more or less) for tall prints or do you go with your guts? For example, I'm supporting a cape that is 200cm tall and about 18 wide. so it fills the plate of a midsize printer and I tend to oversupport it. Cheers and thank you for your videos (and nice words about the sculpt ;) ).

[@HuntersOA]

This is extremely cool! Why did I not know of this? :D I'll support my stuff with this to experiment :O

[@HuntersOA]

Is this already our? I am missing the option for the grid support (I am a pro subscriber)

[@PolyworkshopInEnglish]

@@HuntersOA You need version 6 Public beta, it's available at mango3d.io/downloads/ or in the official Discord server.

[@raphaelsanabria7505]

I'm super excited about the new features upcoming and can't wait to try all of them over the summer the only thing I'm bummed about is my Anycubic MS 5 pro is not on their, but I cannot change the resolution to my own profile will this also be in the future update.?

[@mugetzu]

Feature request for second reinforcement, have an option to connect them as a triangle, for very tall and heavy object i like to make triangles to combat both x/y forces equally.

[@PolyworkshopInEnglish]

It is already in the todo list :) (I need them myself :p)

[@garyjd1166]

interesting. I have a pro subscription and the grid support option is not shown

[@PolyworkshopInEnglish]

You need version 6 Public beta, it's available at mango3d.io/downloads/ or in the official Discord server.

[@garyjd1166]

@@PolyworkshopInEnglish Thank you so very much.

[@wildguardian]

Finally.. won't need voxeldance then

[@pierluigimarchi8108]

when i try to right click, recalculate i get a software crush!!

[@PolyworkshopInEnglish]

Can you send your LYS file to the technical support with your computer information and the steps to reproduce the bug, please?

[@pierluigimarchi8108]

I m not Shure about the steps that cause the crush. I Will try to figure It out and Shure i Will send everything ti the support team!!