Learn to install metallic epoxy - Orange Gold & Wine Red

[@MrsPAKnight]

Thanks for this post going to do my parents floors...after Harvey flooded everything they don't want all carpet anymore. So this will be great for the kitchen living room and bathrooms. LOVE THIS!

[@jjflash61]

What is the cost per sq ft?

[@jbhorne1]

Awesome tutorial. two questions. is this strong enough to do a garage floor? and how are colors sold?

[@insomniacmuffin9998]

But what I really want to know is.. how many pair of shoes these goes go through a year?!?

[@rulo821982]

how much the square meter aprox?

[@Jimyatit]

looks awesome!! id like to order some for my home

[@marymoore5043]

love it!!!!!!!!!!!! Beautiful!!!! I can't wait to try it. Thank you!!!!!!!!!

[@mhenhawke5093]

That looks awesome. Good job, well done.

[@rewkil]

very very nice epoxy ,can i learn it

[@محمداحمد-غ5ف7ب]

hi where do i buy this epoxy paint and can you tell me which one to buy?

[@MyTyler555]

Quite beautiful and exotic!!!

[@shrutig1269]

Great video!!!! Can I use this primer E300 and the color E100 to do my basement in Chicago? I have about 1500 sq ft that I will need to do. Can I attempt a DIY for this? I will be doing this with my wife. Can you let me know how many gallons will be needed and what else will I need to prime the concrete floor in the basement with?Thanks!!

[@lordvarys631]

looks so awesome

[@renerodriguez8673]

is a clear top coat needed? or can a floor wax be applied

[@EpoxyPlus]

+Rene Rodriguez You can top coat it with our urethane or you can use a wax

[@arongatt]

hi guys , needing a solid white floor so using your EP-E200 pigmented white on a EP-MVB but i dont want a glossy finish and was going to apply some decorative stickers , would a EP-U4000 satin urethene top coat finish be needed or have to be used ? waiting to place order . thanks

[@EpoxyPlus]

+Aron Gatt Aron send us an email at [e-mail] and let us know the square footage you are wanting to do. We will send you a complete materials list.

[@matthewhunter3017]

Whats the pot life from mixture mixing to application before expiration? Thanks for the info.

[@EpoxyPlus]

Like all epoxy you want to get it out of the bucket quickly. Once its on the floor and depending on temps you have 45-60 min.

[@elegantgranites3254]

what is the benefit of Installing Metallic Epoxy. How it is better than any other flooring

[@lilianacampbell4146]

hello, was this done over concrete or wood?

[@EpoxyPlus]

+Liliana Campbell This floor was installed over concrete. The black you see is the primer.

[@theblackcatpt]

"the floor is lava!"

[@VCCNC]

Nice video. Got a question, why so many re-rolls of the floor? It looks like you rolled it three times on this video.

[@EpoxyPlus]

+Versatile Coatings LLC Rolling it 3 times is not absolutely necessary but allowing the pigments to settle and then rolling them to bring them to the top will add depth to the finished floor. You dont have enough time to do this with most epoxies but you can with our designer metallic epoxy since you have about 45 minutes of working time.

[@PatrickBaptist]

Very cool indeed.

[@grahamgarner2318]

Brilliant tutorial, any idea if I can get your products in the UK? If not I would like to becme an Agent. Regards Grham

[@EpoxyPlus]

+Graham Garner Grham, contact us through www.epoxyplus.com

[@arturomartinez7642]

I love it wow

[@ORION-AC]

Great Job!!!!!!

[@rict.4938]

Where can I order the right floor epoxy?

[@EpoxyPlus]

www.epoxyplus.com

[@roninkatana582]

Nice

[@wavysworld5791]

Where can i buy this paint?

[@EpoxyPlus]

+Eli Cummings Everything is available at www.epoxyplus.com

[@mayazen6092]

Beautiful

[@EpoxyPlus]

Thanks for watching!

[@hogheadv2]

I am seriously thinking of doing my living room / kitchen with epoxy, [ Big open area with kitchen in corner.] In Michigan I want to use pex under the sub-floor for radiant heat.(68-110 deg max circulating water) I would think epoxy should be a very good surface for this. [I am not a fan of tile]

[@EpoxyPlus]

+hogheadv2 This would work perfect. Contact us for installation help at [e-mail]

[@Markuz1775]

How come there is no foot prints ? They are walking all over it?

[@EpoxyPlus]

They are wearing shoes with cleats on the bottom.

[@anderssrensen7533]

the information under the vid says ep-e100 but in the voice over youre saying ep-e300? timestamp: 14:42

[@EpoxyPlus]

+anders sørensen Thank you for paying attention! Yes as was stated at 14:42 the primer is EP-E300. Then the metallic EP-E100 was put on top of that.

[@jeremyhernandez6282]

Hey Epoxy Plus can you tell me steps from tearout of material to finished product? I'd really appreciate it.

[@EpoxyPlus]

Jeremy, we suggest you check out this video:kzbin.info/www/bejne/oni4f5iVqc-Kqas We've often been told it is the most comprehensive metallic epoxy floor installation tutorial around.

[@ngozibright9301]

Nice job, my own professional occupation is incriete

[@EpoxyPlus]

Thank you!

[@jackelinecampelo8346]

adorei!

[@whatsthedealkc2165]

guy isn't wearing cleats. I cannot imagine what was left inside the floor from his damn sneakers. Love the products though,

[@EpoxyPlus]

+Brad Page Bradley, look a little closer. The installer is wearing cleats. Hmmm maybe thats the reason why you dont see any sneaker marks. In 2015 you can purchase shoes with cleats that look like sneakers. They are called soccer shoes.