Learn to Paint Skulls for your 3D PRINTS and Minis- Quick & Easy

[@alejandromas2102]

I just looked at your video again....I have already started my base with some skull and I love the way you explained on it.

[@shnmraari9943]

Just got back into painting and found your channel. Always nice to see some new techniques. Solid video! Subbed.

[@TheCreativeCollector]

Awesome! Thanks 😊

[@dalecomixcollectibles137]

Love your channel. This video just popped up on my watch list. And it was right on time because I bought a skull the other day, and your video gave me some great tips and techniques. Thanks

[@TheCreativeCollector]

Awesome! Thank you!

[@patriciaolsen7968]

Think you very much showing how to paint skills I learn a hole lot from your videos I love watching your video,s now I know how to paint 🎨 skills again think you you are a great painter keep up the great work can,t until the next video you have a wonderful and great day be safe take care

[@andredupont7598]

Finally I'm buying my first 3D printer by the end of this month. Plus tomorrow should arrive my first Vallejo Model Color set. After watching almost all of your videos I will put in practice every tip you have shared so far. Thanks a lot for all the great content sir!

[@TheCreativeCollector]

Awesome! Can't wait to see some of your work.

[@lokiwartooth1138]

Make sure to join 3d wicked patreon

[@andredupont7598]

@@lokiwartooth1138 I have already been sub like 3 or 4 months to B3DSERK which is part of the Wicked Group. (without a 3D printer) 😅 their models are so dope 🔥😍

[@andredupont7598]

@@TheCreativeCollector If it turns out decent, I will 😉

[@lokiwartooth1138]

@@andredupont7598 awesome I can't wait fir etrigan

[@OaknShield]

Amazing

[@graphingwhale4585]

So glad this video popped up in my feed. Thanks, you helped me learn a lot!

[@TheCreativeCollector]

You're very welcome!

[@stihlpoon5821]

Thanks 👍

[@fusionor]

Pretty good techniques. I can't wait to see how this Mephisto turns out! I can definitely use these tips to paint the Atrocitus bust.

[@TheCreativeCollector]

Yes sir! I hope to have it finished very soon!

[@anthonydefrancesco9078]

Great technique video.

[@TheCreativeCollector]

Thanks my friend

[@greedy3d480]

thank you :) great tips

[@stephenoran2019]

Awesome method! Thanks! I have loads of models of various sorts that include skulls/skeletons. This will really help!

[@TheCreativeCollector]

Thanks! Can't wait to see your work!

[@ChimeraWargaming]

I really appreciate your tutorial. I'm just subbed here

[@TheCreativeCollector]

Thank you 😊

[@cardigast]

Once again....THANK for everethig

[@njprintz5116]

Awesome🔥, just the video I needed before the Archangel from wicked comes out! Sweet!!

[@TheCreativeCollector]

Believe me when I say I'm gonna use this method on mine when I print it.

[@lokiwartooth1138]

Another great tutorial

[@TheCreativeCollector]

Thank you! Cheers!

[@bad_blood_studios]

Halloween just around the corner? Its August... Good video bro, keep them coming!

[@TheCreativeCollector]

Thanks! Will do!

[@DialetoNerd]

Great tutorial

[@DarwinAllen]

Awesome tutorial. Are you painting that first layer straight on to the resin print or did you hit that with some primer first?

[@TheCreativeCollector]

Usually primer first

[@eltenda]

Dope!

[@lubovgeorgeable]

Very nice, Thank You. Could you do a vid on how to paint mud/dirt effects? Thanks

[@TheCreativeCollector]

Coming soon!

[@Bl0ckfett]

Hi there. Thanks for this video. I bought the same colors (bone white is really great). BUT I sprayed a coat of plastic primer before and sprayed the first coat of bone white with an airbrush (it's Paz from the game Metal: Hellsinger). That works so sexy well! I need only few drops for the whole skull (it's around 60mm/ ~ 2 inch). For the shadows I used these Vallejo pigments. If you want, you can try it. Greetings from Germany

[@TheCreativeCollector]

Thanks for the tip. I'll definitely try it.

[@darren990]

looks proper good so you could do bones like that Dinosaur bones for instance

[@alejandromas2102]

How did you seal them? Thank you

[@TheCreativeCollector]

I use Krylon Color Maxx flat in a rattle can.

[@ΓεώργιοςΚουκουράκης-π1ξ]

Hi from greece in this little models you sand them right?like a normal paint job?what sand you use?

[@TheCreativeCollector]

If they need sanding yes. It depends but I use different grits of sandpaper

[@ΓεώργιοςΚουκουράκης-π1ξ]

@@TheCreativeCollector what grit should i use each print use different grit now i start to paint 3d models can y help me ?

[@TheCreativeCollector]

I would use the lightest possible that way you don't see the scratches after you primer

[@ΓεώργιοςΚουκουράκης-π1ξ]

@@TheCreativeCollector first you sand your 3d model you primer again sanding then if ita ok you Paint right?

[@TheCreativeCollector]

Correct. If you need to do more sanding that is.

[@onceuponabook4108]

Are you going show us the Mephisto painting tutorial?

[@TheCreativeCollector]

Yessir!

[@Hughie1987]

when your slicing, do you use AA? Im doing gambit now and part of the X logo has horizontal lines on it

[@TheCreativeCollector]

I'm not totally sure what you're asking.

[@Hughie1987]

@@TheCreativeCollector sorry, anti-aliasing in the slicer settings for each profile in chitubox

[@TheCreativeCollector]

Oh yeah. I use it settings on 2

[@Hughie1987]

@@TheCreativeCollector ok cool thanks

[@m.h1374]

What product did you seal it with?

[@TheCreativeCollector]

I use Krylon Color Maxx flat in a rattle can

[@m.h1374]

@@TheCreativeCollector thanks :) Ill try this reciepe :D I hope Vallejo black pigment will do

[@dadoffour]

Hello mate love you’re content I’m also using a mono x just wondering what layer height you print at your print seem pretty nice and if you would be kind enough to share your settings

[@TheCreativeCollector]

Send me a DM on Instagram and I can forward you my settings.

[@dadoffour]

@@TheCreativeCollector thanks mate will do

[@Wadortheconqueror1337]

What can I use if I don't have the chalk?

[@TheCreativeCollector]

You can use paint. Just in a dry brush form.

[@VersusBattery]

What do you mean by "seal them"

[@TheCreativeCollector]

Using a top coat or clear coat.

[@j_rock578]

I know this is a simple question and probably been asked but: how to seal your prints/painting and what do you use?

[@TheCreativeCollector]

I use Krylon Color Maxx flat. Yeah its a rattle can but I tell you its the best sealer I've ever used.

[@j_rock578]

@@TheCreativeCollector thank you so much, gonna buy some soon

[@billji365]

Now after applying the chock pastels, does it rub off after you apply it and is it okay to use the paint sealer after you apply the chock?

[@TheCreativeCollector]

I seal it after I apply it so it doesn't smear or rub off.

[@billji365]

@@TheCreativeCollector Thank you! This video was extremely helpful

[@myguysneaker1479]

Bro u need to do berserk prints

[@TheCreativeCollector]

I'm looking into some right now!

[@myguysneaker1479]

@@TheCreativeCollector 🙌🏻🙌🏻🙌🏻🙌🏻🙌🏻🙌🏻

[@DialetoNerd]

Wanting to see your air purifier system , Voc's are dangerous

[@qiaojunli1371]

Hello!I am Isaky from Zbanx China,and we would like to invite you to review Laser,do you interested in this?I am so sorry to bother you in conment because I did not know your biz email😄

[@TheCreativeCollector]

Email is in the about section on my header page

[@qiaojunli1371]

@@TheCreativeCollector Thanks for your reply!I got your email already and I send the collab email to you now!Thank you so much